NCS/p4_testbed
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs(setup): Added documentation for the testbed

Browse Source 
Signed-off-by: Tuan-Dat Tran <tuan-dat.tran@tudattr.dev>
This commit is contained in:
Tuan-Dat Tran
2024-12-30 17:17:24 +01:00
parent d5847cd916
commit 79ab026508
9 changed files with 385 additions and 122 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
scripts/03-wedge_port_configure.command
View File

@@ -6,5 +6,6 @@ port-enb 31/-
port-add 32/- 10G NONE
an-set 32/- 2
port-enb 32/-
show
exit
exit

108
scripts/10-host_notes.sh
View File

@@ -1,108 +0,0 @@
#!/bin/bash
# ncs-node1: enp6s0f0np0 / enp6s0f1np1
# - Control:
# - enp4s0f2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
# - Data:
# - enp6s0f0np0 | 10.0.1.1 | 64:9d:99:b1:0a:88 | tb_node1_if0 | 32/2 | 266
# - enp6s0f1np1 | 10.0.1.2 | 64:9d:99:b1:0a:89 | tb_node1_if1 | 32/3 | 267
# - enp6s0f2np2 | 10.0.1.3 | 64:9d:99:b1:0a:8a | tb_node1_if2 | 32/1 | 265
# - enp6s0f3np3 | 10.0.1.4 | 64:9d:99:b1:0a:8b | tb_node1_if3 | 32/0 | 264
#
# ncs-node2:
# - Control:
# - enp4s0f2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000
# - Data:
# - enp6s0f0np0 | 10.0.2.1 | 64:9d:99:b1:0a:a4 | tb_node2_if0 | 31/0 | 256
# - enp6s0f1np1 | 10.0.2.2 | 64:9d:99:b1:0a:a5 | tb_node2_if1 | 31/3 | 259
# - enp6s0f2np2 | 10.0.2.3 | 64:9d:99:b1:0a:a6 | tb_node2_if2 | 31/1 | 257
# - enp6s0f3np3 | 10.0.2.4 | 64:9d:99:b1:0a:a7 | tb_node2_if3 | 31/2 | 258
#
# ncs-wedge:
# PORT |MAC |D_P|P/PT|SPEED |FEC |AN|KR|RDY|ADM|OPR|LPBK |FRAMES RX |FRAMES TX |E
# 31/0 |48/0|256|2/ 0|10G |NONE|Ds|Au|YES|ENB|UP | NONE | 62| 0|
# 31/1 |48/1|257|2/ 1|10G |NONE|Ds|Au|YES|ENB|UP | NONE | 62| 0|
# 31/2 |48/2|258|2/ 2|10G |NONE|Ds|Au|YES|ENB|UP | NONE | 62| 0|
# 31/3 |48/3|259|2/ 3|10G |NONE|Ds|Au|YES|ENB|UP | NONE | 62| 0|
# 32/0 |50/0|264|2/ 8|10G |NONE|Ds|Au|YES|ENB|UP | NONE | 62| 0|
# 32/1 |50/1|265|2/ 9|10G |NONE|Ds|Au|YES|ENB|UP | NONE | 62| 0|
# 32/2 |50/2|266|2/10|10G |NONE|Ds|Au|YES|ENB|UP | NONE | 65| 0|
# 32/3 |50/3|267|2/11|10G |NONE|Ds|Au|YES|ENB|UP | NONE | 65| 0|
# node1
# Create Namespace: Testbed on Node1 for Interface n
sudo ip netns add tb_node1_if0
sudo ip netns add tb_node1_if1
sudo ip netns add tb_node1_if2
sudo ip netns add tb_node1_if3
# Add interfaces to namespaces
sudo ip link set enp6s0f0np0 netns tb_node1_if0
sudo ip link set enp6s0f1np1 netns tb_node1_if1
sudo ip link set enp6s0f2np2 netns tb_node1_if2
sudo ip link set enp6s0f3np3 netns tb_node1_if3
# Show Info
sudo ip netns exec tb_node1_if0 ip a s enp6s0f0np0
sudo ip netns exec tb_node1_if1 ip a s enp6s0f1np1
sudo ip netns exec tb_node1_if2 ip a s enp6s0f2np2
sudo ip netns exec tb_node1_if3 ip a s enp6s0f3np3
# Set IP Addresses
sudo ip netns exec tb_node1_if0 ip addr add dev enp6s0f0np0 10.0.1.1/16
sudo ip netns exec tb_node1_if1 ip addr add dev enp6s0f1np1 10.0.1.2/16
sudo ip netns exec tb_node1_if2 ip addr add dev enp6s0f2np2 10.0.1.3/16
sudo ip netns exec tb_node1_if3 ip addr add dev enp6s0f3np3 10.0.1.4/16
# Turn on Links
sudo ip netns exec tb_node1_if0 ip link set up enp6s0f0np0
sudo ip netns exec tb_node1_if1 ip link set up enp6s0f1np1
sudo ip netns exec tb_node1_if2 ip link set up enp6s0f2np2
sudo ip netns exec tb_node1_if3 ip link set up enp6s0f3np3
sudo ./11-host_arps.sh tb_node1_if0 enp6s0f0np0
sudo ./11-host_arps.sh tb_node1_if1 enp6s0f1np1
sudo ./11-host_arps.sh tb_node1_if2 enp6s0f2np2
sudo ./11-host_arps.sh tb_node1_if3 enp6s0f3np3
# node2
# Create Namespace: Testbed on Node1 for Interface n
sudo ip netns add tb_node2_if0
sudo ip netns add tb_node2_if1
sudo ip netns add tb_node2_if2
sudo ip netns add tb_node2_if3
# Add interfaces to namespaces
sudo ip link set enp6s0f0np0 netns tb_node2_if0
sudo ip link set enp6s0f1np1 netns tb_node2_if1
sudo ip link set enp6s0f2np2 netns tb_node2_if2
sudo ip link set enp6s0f3np3 netns tb_node2_if3
# Show Info
sudo ip netns exec tb_node2_if0 ip a s enp6s0f0np0
sudo ip netns exec tb_node2_if1 ip a s enp6s0f1np1
sudo ip netns exec tb_node2_if2 ip a s enp6s0f2np2
sudo ip netns exec tb_node2_if3 ip a s enp6s0f3np3
# Set IP Addresses
sudo ip netns exec tb_node2_if0 ip addr add dev enp6s0f0np0 10.0.2.1/16
sudo ip netns exec tb_node2_if1 ip addr add dev enp6s0f1np1 10.0.2.2/16
sudo ip netns exec tb_node2_if2 ip addr add dev enp6s0f2np2 10.0.2.3/16
sudo ip netns exec tb_node2_if3 ip addr add dev enp6s0f3np3 10.0.2.4/16
# Turn on Links
sudo ip netns exec tb_node2_if0 ip link set up enp6s0f0np0
sudo ip netns exec tb_node2_if1 ip link set up enp6s0f1np1
sudo ip netns exec tb_node2_if2 ip link set up enp6s0f2np2
sudo ip netns exec tb_node2_if3 ip link set up enp6s0f3np3
# execute arp
sudo ./11-host_arps.sh tb_node2_if0 enp6s0f0np0
sudo ./11-host_arps.sh tb_node2_if1 enp6s0f1np1
sudo ./11-host_arps.sh tb_node2_if2 enp6s0f2np2
sudo ./11-host_arps.sh tb_node2_if3 enp6s0f3np3
# Show arp
sudo ip netns exec tb_node2_if0 ip a s enp6s0f0np0
sudo ip netns exec tb_node2_if1 ip a s enp6s0f1np1
sudo ip netns exec tb_node2_if2 ip a s enp6s0f2np2
sudo ip netns exec tb_node2_if3 ip a s enp6s0f3np3

35
scripts/10-host_setup.sh Normal file
View File

@@ -0,0 +1,35 @@
#!/bin/bash
# node1
sudo ./30-add_namespaces.sh tb_node1_if0
sudo ./30-add_namespaces.sh tb_node1_if1
sudo ./30-add_namespaces.sh tb_node1_if2
sudo ./30-add_namespaces.sh tb_node1_if3
sudo ./31-configure_interfaces.sh tb_node1_if0 enp6s0f0np0 10.0.1.1/16
sudo ./31-configure_interfaces.sh tb_node1_if1 enp6s0f1np1 10.0.1.2/16
sudo ./31-configure_interfaces.sh tb_node1_if2 enp6s0f2np2 10.0.1.3/16
sudo ./31-configure_interfaces.sh tb_node1_if3 enp6s0f3np3 10.0.1.4/16
sudo ./32-setup_arp.sh tb_node1_if0 enp6s0f0np0
sudo ./32-setup_arp.sh tb_node1_if1 enp6s0f1np1
sudo ./32-setup_arp.sh tb_node1_if2 enp6s0f2np2
sudo ./32-setup_arp.sh tb_node1_if3 enp6s0f3np3
# node2
# Create Namespace: Testbed on Node1 for Interface n
sudo ./30-add_namespaces.sh tb_node2_if0
sudo ./30-add_namespaces.sh tb_node2_if1
sudo ./30-add_namespaces.sh tb_node2_if2
sudo ./30-add_namespaces.sh tb_node2_if3
sudo ./31-configure_interfaces.sh tb_node2_if0 enp6s0f0np0 10.0.2.1/16
sudo ./31-configure_interfaces.sh tb_node2_if1 enp6s0f1np1 10.0.2.2/16
sudo ./31-configure_interfaces.sh tb_node2_if2 enp6s0f2np2 10.0.2.3/16
sudo ./31-configure_interfaces.sh tb_node2_if3 enp6s0f3np3 10.0.2.4/16
# execute arp
sudo ./32-setup_arp.sh tb_node2_if0 enp6s0f0np0
sudo ./32-setup_arp.sh tb_node2_if1 enp6s0f1np1
sudo ./32-setup_arp.sh tb_node2_if2 enp6s0f2np2
sudo ./32-setup_arp.sh tb_node2_if3 enp6s0f3np3

14
scripts/11-host_arps.sh
View File

@@ -1,14 +0,0 @@
#!/bin/bash
NS=$1
IF=$2
sudo ip netns exec "$NS" arp -i "$IF" -s 10.0.1.1 64:9d:99:b1:0a:88
sudo ip netns exec "$NS" arp -i "$IF" -s 10.0.1.2 64:9d:99:b1:0a:89
sudo ip netns exec "$NS" arp -i "$IF" -s 10.0.1.3 64:9d:99:b1:0a:8a
sudo ip netns exec "$NS" arp -i "$IF" -s 10.0.1.4 64:9d:99:b1:0a:8b
sudo ip netns exec "$NS" arp -i "$IF" -s 10.0.2.1 64:9d:99:b1:0a:a4
sudo ip netns exec "$NS" arp -i "$IF" -s 10.0.2.2 64:9d:99:b1:0a:a5
sudo ip netns exec "$NS" arp -i "$IF" -s 10.0.2.3 64:9d:99:b1:0a:a6
sudo ip netns exec "$NS" arp -i "$IF" -s 10.0.2.4 64:9d:99:b1:0a:a7

3
scripts/19-cleanup.sh Normal file
View File

@@ -0,0 +1,3 @@
#!/bin/bash
ip -all netns delete

5
scripts/30-add_namespaces.sh Normal file
View File

@@ -0,0 +1,5 @@
#!/bin/bash
NS=$1
ip netns add "$NS"

31
scripts/31-configure_interfaces.sh Normal file
View File

@@ -0,0 +1,31 @@
#!/bin/bash
NS=$1
IF=$2
IP=$3
# Add interfaces to namespaces
ip link set "$IF" netns "$NS"
ip link set "$IF" netns "$NS"
ip link set "$IF" netns "$NS"
ip link set "$IF" netns "$NS"
# Set IP Addresses
ip netns exec "$NS" ip addr add dev "$IF" "$IP"
ip netns exec "$NS" ip addr add dev "$IF" "$IP"
ip netns exec "$NS" ip addr add dev "$IF" "$IP"
ip netns exec "$NS" ip addr add dev "$IF" "$IP"
# Turn on Links
ip netns exec "$NS" ip link set up "$IF"
ip netns exec "$NS" ip link set up "$IF"
ip netns exec "$NS" ip link set up "$IF"
ip netns exec "$NS" ip link set up "$IF"
# For Debugging
#
# # Show interface info
# ip netns exec "$NS" ip a s "$IF"
# ip netns exec "$NS" ip a s "$IF"
# ip netns exec "$NS" ip a s "$IF"
# ip netns exec "$NS" ip a s "$IF"

22
scripts/32-setup_arp.sh Normal file
View File

@@ -0,0 +1,22 @@
#!/bin/bash
NS=$1
IF=$2
ip netns exec "$NS" arp -i "$IF" -s 10.0.1.1 64:9d:99:b1:0a:88
ip netns exec "$NS" arp -i "$IF" -s 10.0.1.2 64:9d:99:b1:0a:89
ip netns exec "$NS" arp -i "$IF" -s 10.0.1.3 64:9d:99:b1:0a:8a
ip netns exec "$NS" arp -i "$IF" -s 10.0.1.4 64:9d:99:b1:0a:8b
ip netns exec "$NS" arp -i "$IF" -s 10.0.2.1 64:9d:99:b1:0a:a4
ip netns exec "$NS" arp -i "$IF" -s 10.0.2.2 64:9d:99:b1:0a:a5
ip netns exec "$NS" arp -i "$IF" -s 10.0.2.3 64:9d:99:b1:0a:a6
ip netns exec "$NS" arp -i "$IF" -s 10.0.2.4 64:9d:99:b1:0a:a7
# For Debugging
#
# # Show arp table
# ip netns exec "$NS" arp
# ip netns exec "$NS" arp
# ip netns exec "$NS" arp
# ip netns exec "$NS" arp

288
scripts/README.md Normal file
View File

@@ -0,0 +1,288 @@
# P4 Testbed
In this repository we're have scripts to setup a network testbed with
2 nodes and a Tofino Wedge 100BF-32X 100GBE Baremetal Switch.
## Prerequisites
- Hardware
- Tofino Wedge 100BF-32X 100GBE Baremetal Switch
- 2x 2m 40G QSFP+ to 4x 10G SFP+ Breakout Cable
- 2x Server with each 4 usable SFP+ Ports
- Software
- Barefoot SDE
- SSH config for nodes
## Setup and Usage
The setup looks as follows.
Depending on the setup of the QSFP Breakout cable the port numbers or the $n$
may differ for $31/n$ and $32/n$ and the order may be different.
The ports shown in this setup are only the connections between the wedge and
the nodes (data plane).
A separate network connection is needed to SSH into the wedge/nodes (control plane).
For this testbed we're setting up a simple switch which forwards all traffic
according to rules in the ingress.
Look at [l1switch.p4](../l1switch/l1switch.p4) for more information.
<!-- markdownlint-disable MD013 -->
```ascii
+-----------------+
| WEDGE | +----------------------------------------------------------+
+-----------------+ | Node 1 : IP | MAC | Namespace |
| Port 32 | +----------------------------------------------------------+
| 32/2 | 266 |--------+ | enp6s0f0np0: 10.0.1.1 | 64:9d:99:b1:0a:88 | tb_node1_if0 |
| 32/3 | 267 |--------+ | enp6s0f1np1: 10.0.1.2 | 64:9d:99:b1:0a:89 | tb_node1_if1 |
| 32/1 | 265 |--------+ | enp6s0f2np2: 10.0.1.3 | 64:9d:99:b1:0a:8a | tb_node1_if2 |
| 32/0 | 264 |--------+ | enp6s0f3np3: 10.0.1.4 | 64:9d:99:b1:0a:8b | tb_node1_if3 |
| | +----------------------------------------------------------+
| |
| | +----------------------------------------------------------+
| | | Node 2 : IP | MAC | Namespace |
| Port 31 | +----------------------------------------------------------+
| 31/0 | 256 |--------+ | enp6s0f0np0: 10.0.2.1 | 64:9d:99:b1:0a:a5 | tb_node1_if0 |
| 31/3 | 259 |--------+ | enp6s0f1np1: 10.0.2.2 | 64:9d:99:b1:0a:a4 | tb_node1_if1 |
| 31/1 | 257 |--------+ | enp6s0f2np2: 10.0.2.3 | 64:9d:99:b1:0a:a4 | tb_node1_if2 |
| 31/2 | 258 |--------+ | enp6s0f3np3: 10.0.2.4 | 64:9d:99:b1:0a:a4 | tb_node1_if3 |
| | +----------------------------------------------------------+
+-----------------+
```
<!-- markdownlint-enable MD013 -->
### 00-wedge_on_reboot.sh
> This script needs to be run on the Tofino Wedge.
When the wedge has just restarted for the first time we'll need to run this script
on the wedge to load the necessary kernel module.
### 01-wedge_compile_code.sh
> This script needs to be run on the Tofino Wedge.
### 02-run_switch_program.sh
> This script needs to be run on the Tofino Wedge.
### 03-wedge_port_configure.sh
> This script does not need to be run.
This script is just a placeholder and needs not to be run.
Instead look at the [./03-wedge_port_configure.command](./03-wedge_port_configure.command)
script.
### 03-wedge_port_configure.command
> This script needs to be run with a special command on the Tofino Wedge.
Enter the configuration shell of the current switch program and setup the ports:
- 31/0
- 31/1
- 31/2
- 31/3
- 32/0
- 32/1
- 32/2
- 32/3
That script needs to be run like this:
`bfshell -f ./03-wedge_port_configure.command`
### 04-wedge_route_configure.py
> This script needs to be run with a special command on the Tofino Wedge.
This script needs to be run on the Tofino Wedge.
Configure the ingress of the switch program. Maps the `D_P` ports to the
respective IP.
This script is run with `bfshell -b $(pwd)/04-wedge_route_configure.py`
### 10-host_setup.sh
> This script needs to be run on the respective nodes with the section
> of the hosts commented in and the other sections commented out.
This script executes multiple scripts which setup the hosts.
In our setup we'll only have two hosts, but this can be extended to other
hosts as well.
Information needed to do so is:
- The interface name which is connected to the switch
- MAC address of the interface
- Unused IP address
- And take a look at the appendix under "Adding new node"
### 19-cleanup.sh
> This script needs to be run on a node
Removes all namespaces.
### 30/31/... Scripts
> These are helper scripts
These scripts are executed by [./10-host_setup.sh](./10-host_setup.sh).
### Run traffic
From here on out you can run traffic between the hosts.
## Appendix
### Node and Wedge Ports
How the port setup etc. looks like on the nodes and ports after everything is
set up.
<!-- markdownlint-disable MD013 -->
#### ncs-node1
Control: enp4s0f2
Data:
| Interface | IP | MAC | Namespace | Wedge Port | Wedge D_P |
| ----------- | -------- | ----------------- | ------------ | ---------- | --------- |
| enp6s0f0np0 | 10.0.1.1 | 64:9d:99:b1:0a:88 | tb_node1_if0 | 32/2 | 266 |
| enp6s0f1np1 | 10.0.1.2 | 64:9d:99:b1:0a:89 | tb_node1_if1 | 32/3 | 267 |
| enp6s0f2np2 | 10.0.1.3 | 64:9d:99:b1:0a:8a | tb_node1_if2 | 32/1 | 265 |
| enp6s0f3np3 | 10.0.1.4 | 64:9d:99:b1:0a:8b | tb_node1_if3 | 32/0 | 264 |
#### ncs-node2
Control: enp4s0f2
Data:
| Interface | IP | MAC | Namespace | Wedge Port | Wedge D_P |
| ----------- | -------- | ----------------- | ------------ | ---------- | --------- |
| enp6s0f0np0 | 10.0.2.1 | 64:9d:99:b1:0a:a4 | tb_node2_if0 | 31/0 | 256 |
| enp6s0f1np1 | 10.0.2.2 | 64:9d:99:b1:0a:a5 | tb_node2_if1 | 31/3 | 259 |
| enp6s0f2np2 | 10.0.2.3 | 64:9d:99:b1:0a:a6 | tb_node2_if2 | 31/1 | 257 |
| enp6s0f3np3 | 10.0.2.4 | 64:9d:99:b1:0a:a7 | tb_node2_if3 | 31/2 | 258 |
#### ncs-wedge
| PORT | MAC | D_P | P/PT | SPEED | FEC | AN | KR | RDY | ADM | OPR | LPBK | FRAMES RX | FRAMES TX | E |
| ---- | ---- | --- | ---- | ----- | ---- | --- | --- | --- | --- | --- | ---- | --------- | --------- | --- |
| 31/0 | 48/0 | 256 | 2/ 0 | 10G | NONE | Ds | Au | YES | ENB | UP | NONE | 62 | 0 | |
| 31/1 | 48/1 | 257 | 2/ 1 | 10G | NONE | Ds | Au | YES | ENB | UP | NONE | 62 | 0 | |
| 31/2 | 48/2 | 258 | 2/ 2 | 10G | NONE | Ds | Au | YES | ENB | UP | NONE | 62 | 0 | |
| 31/3 | 48/3 | 259 | 2/ 3 | 10G | NONE | Ds | Au | YES | ENB | UP | NONE | 62 | 0 | |
| 32/0 | 50/0 | 264 | 2/ 8 | 10G | NONE | Ds | Au | YES | ENB | UP | NONE | 62 | 0 | |
| 32/1 | 50/1 | 265 | 2/ 9 | 10G | NONE | Ds | Au | YES | ENB | UP | NONE | 62 | 0 | |
| 32/2 | 50/2 | 266 | 2/10 | 10G | NONE | Ds | Au | YES | ENB | UP | NONE | 65 | 0 | |
| 32/3 | 50/3 | 267 | 2/11 | 10G | NONE | Ds | Au | YES | ENB | UP | NONE | 65 | 0 | |
<!-- markdownlint-enable MD013 -->
### Adding new node
We want to add a new node: =ncs-node3= to our network.
We'll connect the 4 sfp+ ports of our node via a qsfp+ breakout cable to the
Tofino Wedge on port 30.
Given that the 4 interfaces on =ncs-node3= have the names:
- enp6s1 with 00:00:00:00:00:01 (MAC) and 10.0.3.1 (IP)
- enp6s2 with 00:00:00:00:00:02 (MAC) and 10.0.3.2 (IP)
- enp6s3 with 00:00:00:00:00:03 (MAC) and 10.0.3.3 (IP)
- enp6s4 with 00:00:00:00:00:04 (MAC) and 10.0.3.4 (IP)
Find and replace the actual MAC addresses of the actual interfaces by running
`ip a s` on the node.
#### Adjust ./03-wedge_port_configure.command
Add:
```command
port-add 30/- 10G NONE
an-set 30/- 2
port-enb 30/-
```
- port-add: Add the port
- an-set: Set auto negotiation
- port-enb: Enable the port
To the command script before the
```command
exit
exit
```
When running this take note of the `D_P` column of the new ports. You'll need
to enter them as `egress_port` in the next script.
#### Adjust ./04-wedge_route_configure.py
Add the following:
Replace `???` by the actual port number for the respective interface.
```py
bfrt.l1switch.pipe.SwitchIngress.t_l1_forwarding.add_with_send(
egress_port=???, dst_addr="10.0.3.1"
)
bfrt.l1switch.pipe.SwitchIngress.t_l1_forwarding.add_with_send(
egress_port=???, dst_addr="10.0.3.2"
)
bfrt.l1switch.pipe.SwitchIngress.t_l1_forwarding.add_with_send(
egress_port=???, dst_addr="10.0.3.3"
)
bfrt.l1switch.pipe.SwitchIngress.t_l1_forwarding.add_with_send(
egress_port=???, dst_addr="10.0.3.4"
)
```
- egress_port: Value at the `D_P` column at the output of the last script.
#### Adjust ./10-host_setup.sh
Add a section for you new node like this:
```sh
# node3
sudo ./30-add_namespaces.sh tb_node3_if0
sudo ./30-add_namespaces.sh tb_node3_if1
sudo ./30-add_namespaces.sh tb_node3_if2
sudo ./30-add_namespaces.sh tb_node3_if3
sudo ./31-configure_interfaces.sh tb_node3_if0 enp6s1 10.0.4.1/16
sudo ./31-configure_interfaces.sh tb_node3_if1 enp6s2 10.0.4.2/16
sudo ./31-configure_interfaces.sh tb_node3_if2 enp6s3 10.0.4.3/16
sudo ./31-configure_interfaces.sh tb_node3_if3 enp6s4 10.0.4.4/16
sudo ./32-setup_arp.sh tb_node3_if0 enp6s1
sudo ./32-setup_arp.sh tb_node3_if1 enp6s2
sudo ./32-setup_arp.sh tb_node3_if2 enp6s3
sudo ./32-setup_arp.sh tb_node3_if3 enp6s4
```
Adjust [./32-setup_arp.sh](./32-setup_arp.sh) before running this script.
#### Adjust ./32-setup_arp.sh
Add the following section for your new interfaces like this:
Replace the placeholder mac address with the actual MAC addresses of the interfaces.
```sh
ip netns exec "$NS" arp -i "$IF" -s 10.0.3.1 00:00:00:00:00:01
ip netns exec "$NS" arp -i "$IF" -s 10.0.3.2 00:00:00:00:00:02
ip netns exec "$NS" arp -i "$IF" -s 10.0.3.3 00:00:00:00:00:03
ip netns exec "$NS" arp -i "$IF" -s 10.0.3.4 00:00:00:00:00:04
```