Added paperless consume to sambashare

Signed-off-by: TuDatTr <tuan-dat.tran@tudattr.dev>

group_vars/all/vars.yml

@@ -233,7 +233,13 @@ samba:
   user: "smbuser"
   group: "smbshare"
   config: "templates/smb.conf"
-  media_dir: "/media"
+  shares:
+    media:
+      name: "media"
+      path: "/media"
+    paperless:
+      name: "paperless"
+      path: "{{ paperless.data.consume }}"
 
 
 #
@@ -486,3 +492,13 @@ paperless:
   redis:
     host: "paperless-redis"
     data: "{{ docker_dir }}/paperless/redis/data"
+
+#
+# Homarr
+#
+
+homarr:
+  host: "homarr"
+  volumes:
+    configs: "{{docker_dir}}/homarr/configs"
+    icons: "{{docker_dir}}/homarr/icons"

roles/docker/templates/aya01/compose.yaml

@@ -435,6 +435,18 @@ services:
       - "PAPERLESS_TIME_ZONE={{ timezone }}"
       - "PAPERLESS_OCR_LANGUAGE=deu"
 
+  {{ homarr.host }}:
+    container_name: {{ homarr.host }}
+    image: ghcr.io/ajnart/homarr:latest
+    restart: unless-stopped
+    depends_on:
+      - pihole
+    networks:
+      - net
+    volumes:
+      - {{ homarr.volumes.configs }}:/app/data/configs
+      - {{ homarr.volumes.icons }}:/app/public/icons
+
 networks:
   zoneminder:
     driver: bridge

roles/samba/tasks/install.yaml

@@ -20,10 +20,13 @@
 
 - name: Change permission on share
   file:
-    path: "{{ samba.media_dir }}"
+    path: "{{ item }}"
     group: "{{ samba.group }}"
     mode: "2770"
   become: true
+  loop:
+    - "{{ samba.shares.media.path }}"
+    - "{{ samba.shares.paperless.path }}"
 
 - name: Add user "{{ samba.user }}"
   user:

roles/samba/templates/smb.conf

@@ -1,219 +1,16 @@
-#======================= Global Settings =======================
+[{{ samba.shares.media.name }}]
+    comment = {{ samba.shares.media.name }}
+    path = "{{ samba.shares.media.path }}"
+    writable = no
+    guest ok = no
+    valid users = "@{{samba.group}}"
+    force create mode = 770
+    force directory mode = 770
+    inherit permissions = yes
 
-[global]
+[{{ samba.shares.paperless.name }}]
-
+    comment = {{ samba.shares.paperless.name }}
-## Browsing/Identification ###
+    path = "{{ samba.shares.paperless.path }}"
-
-# Change this to the workgroup/NT-domain name your Samba server will part of
-   workgroup = TUDATTR
-
-#### Networking ####
-
-# The specific set of interfaces / networks to bind to
-# This can be either the interface name or an IP address/netmask;
-# interface names are normally preferred
-;   interfaces = 127.0.0.0/8 eth0
-
-# Only bind to the named interfaces and/or networks; you must use the
-# 'interfaces' option above to use this.
-# It is recommended that you enable this feature if your Samba machine is
-# not protected by a firewall or is a firewall itself.  However, this
-# option cannot handle dynamic or non-broadcast interfaces correctly.
-;   bind interfaces only = yes
-
-#### Debugging/Accounting ####
-
-# This tells Samba to use a separate log file for each machine
-# that connects
-   log file = /var/log/samba-%m.log
-
-# Cap the size of the individual log files (in KiB).
-   max log size = 1000
-
-# We want Samba to only log to /var/log/samba/log.{smbd,nmbd}.
-# Append syslog@1 if you want important messages to be sent to syslog too.
-   logging = file
-
-# Do something sensible when Samba crashes: mail the admin a backtrace
-   panic action = /usr/share/samba/panic-action %d
-
-
-####### Authentication #######
-
-# Server role. Defines in which mode Samba will operate. Possible
-# values are "standalone server", "member server", "classic primary
-# domain controller", "classic backup domain controller", "active
-# directory domain controller". 
-#
-# Most people will want "standalone server" or "member server".
-# Running as "active directory domain controller" will require first
-# running "samba-tool domain provision" to wipe databases and create a
-# new domain.
-   server role = standalone server
-
-   obey pam restrictions = yes
-
-# This boolean parameter controls whether Samba attempts to sync the Unix
-# password with the SMB password when the encrypted SMB password in the
-# passdb is changed.
-   unix password sync = yes
-
-# For Unix password sync to work on a Debian GNU/Linux system, the following
-# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
-# sending the correct chat script for the passwd program in Debian Sarge).
-   passwd program = /usr/bin/passwd %u
-   passwd chat = *Enter\snew\s*\spassword:* %n\n *Retype\snew\s*\spassword:* %n\n *password\supdated\ssuccessfully* .
-
-# This boolean controls whether PAM will be used for password changes
-# when requested by an SMB client instead of the program listed in
-# 'passwd program'. The default is 'no'.
-   pam password change = yes
-
-# This option controls how unsuccessful authentication attempts are mapped
-# to anonymous connections
-   map to guest = bad user
-
-########## Domains ###########
-
-#
-# The following settings only takes effect if 'server role = classic
-# primary domain controller', 'server role = classic backup domain controller'
-# or 'domain logons' is set 
-#
-
-# It specifies the location of the user's
-# profile directory from the client point of view) The following
-# required a [profiles] share to be setup on the samba server (see
-# below)
-;   logon path = \\%N\profiles\%U
-# Another common choice is storing the profile in the user's home directory
-# (this is Samba's default)
-#   logon path = \\%N\%U\profile
-
-# The following setting only takes effect if 'domain logons' is set
-# It specifies the location of a user's home directory (from the client
-# point of view)
-;   logon drive = H:
-#   logon home = \\%N\%U
-
-# The following setting only takes effect if 'domain logons' is set
-# It specifies the script to run during logon. The script must be stored
-# in the [netlogon] share
-# NOTE: Must be store in 'DOS' file format convention
-;   logon script = logon.cmd
-
-# This allows Unix users to be created on the domain controller via the SAMR
-# RPC pipe.  The example command creates a user account with a disabled Unix
-# password; please adapt to your needs
-; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u
-
-# This allows machine accounts to be created on the domain controller via the 
-# SAMR RPC pipe.  
-# The following assumes a "machines" group exists on the system
-; add machine script  = /usr/sbin/useradd -g machines -c "%u machine account" -d /var/lib/samba -s /bin/false %u
-
-# This allows Unix groups to be created on the domain controller via the SAMR
-# RPC pipe.  
-; add group script = /usr/sbin/addgroup --force-badname %g
-
-############ Misc ############
-
-# Using the following line enables you to customise your configuration
-# on a per machine basis. The %m gets replaced with the netbios name
-# of the machine that is connecting
-;   include = /home/samba/etc/smb.conf.%m
-
-# Some defaults for winbind (make sure you're not using the ranges
-# for something else.)
-;   idmap config * :              backend = tdb
-;   idmap config * :              range   = 3000-7999
-;   idmap config YOURDOMAINHERE : backend = tdb
-;   idmap config YOURDOMAINHERE : range   = 100000-999999
-;   template shell = /bin/bash
-
-# Setup usershare options to enable non-root users to share folders
-# with the net usershare command.
-
-# Maximum number of usershare. 0 means that usershare is disabled.
-#   usershare max shares = 100
-
-# Allow users who've been granted usershare privileges to create
-# public shares, not just authenticated ones
-   usershare allow guests = yes
-
-#======================= Share Definitions =======================
-
-[homes]
-   comment = Home Directories
-   browseable = no
-
-# By default, the home directories are exported read-only. Change the
-# next parameter to 'no' if you want to be able to write to them.
-   read only = yes
-
-# File creation mask is set to 0700 for security reasons. If you want to
-# create files with group=rw permissions, set next parameter to 0775.
-   create mask = 0700
-
-# Directory creation mask is set to 0700 for security reasons. If you want to
-# create dirs. with group=rw permissions, set next parameter to 0775.
-   directory mask = 0700
-
-# By default, \\server\username shares can be connected to by anyone
-# with access to the samba server.
-# The following parameter makes sure that only "username" can connect
-# to \\server\username
-# This might need tweaking when using external authentication schemes
-   valid users = %S
-
-# Un-comment the following and create the netlogon directory for Domain Logons
-# (you need to configure Samba to act as a domain controller too.)
-;[netlogon]
-;   comment = Network Logon Service
-;   path = /home/samba/netlogon
-;   guest ok = yes
-;   read only = yes
-
-# Un-comment the following and create the profiles directory to store
-# users profiles (see the "logon path" option above)
-# (you need to configure Samba to act as a domain controller too.)
-# The path below should be writable by all users so that their
-# profile directory may be created the first time they log on
-;[profiles]
-;   comment = Users profiles
-;   path = /home/samba/profiles
-;   guest ok = no
-;   browseable = no
-;   create mask = 0600
-;   directory mask = 0700
-
-;[printers]
-;   comment = All Printers
-;   browseable = no
-;   path = /var/spool/samba
-;   printable = yes
-;   guest ok = no
-;   read only = yes
-;   create mask = 0700
-
-# Windows clients look for this share name as a source of downloadable
-# printer drivers
-;[print$]
-;   comment = Printer Drivers
-;   path = /var/lib/samba/printers
-;   browseable = yes
-;   read only = yes
-;   guest ok = no
-# Uncomment to allow remote administration of Windows print drivers.
-# You may need to replace 'lpadmin' with the name of the group your
-# admin users are members of.
-# Please note that you also need to set appropriate Unix permissions
-# to the drivers directory for these users to have write rights in it
-;   write list = root, @lpadmin
-
-[media]
-    comment = Media
-    path = "{{ samba.media_dir }}"
     writable = yes
     guest ok = no
     valid users = "@{{samba.group}}"