# i3 config file (v4)

################################################################################################
####################################### System Settings ########################################
################################################################################################

# Set mod key (Mod1=<Alt>, Mod4=<Super>)
set $mod Mod4

# Use Mouse+$mod to drag floating windows
floating_modifier $mod

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
# font xft:Noto Sans 12

focus_follows_mouse no
################################################################################################
####################################### Window Settings ########################################
################################################################################################

# Configure
# border style <normal|1pixel|pixel xx|none|pixel>
new_window pixel 1
new_float normal
hide_edge_borders none


################################################################################################
## sound-section - DO NOT EDIT if you wish to automatically upgrade Alsa -> Pulseaudio later! ##
################################################################################################

exec --no-startup-id volumeicon
bindsym $mod+Ctrl+m exec terminal -e 'alsamixer'
#exec --no-startup-id pulseaudio
#exec --no-startup-id pa-applet
#bindsym $mod+Ctrl+m exec pavucontrol

################################################################################################
###################################### Workspace Settings ######################################
################################################################################################

# Workspace names
set $ws1 ""
set $ws2 ""
set $ws3 ""
set $ws4 ""
set $ws5 ""
set $ws6 ""
set $ws7 ""
set $ws8 ""

# switch to workspace
bindsym $mod+1 workspace $ws1
bindsym $mod+2 workspace $ws2
bindsym $mod+3 workspace $ws3
bindsym $mod+4 workspace $ws4
bindsym $mod+5 workspace $ws5
bindsym $mod+6 workspace $ws6
bindsym $mod+7 workspace $ws7
bindsym $mod+8 workspace $ws8

# Move focused container to workspace
bindsym $mod+Ctrl+1 move container to workspace $ws1
bindsym $mod+Ctrl+2 move container to workspace $ws2
bindsym $mod+Ctrl+3 move container to workspace $ws3
bindsym $mod+Ctrl+4 move container to workspace $ws4
bindsym $mod+Ctrl+5 move container to workspace $ws5
bindsym $mod+Ctrl+6 move container to workspace $ws6
bindsym $mod+Ctrl+7 move container to workspace $ws7
bindsym $mod+Ctrl+8 move container to workspace $ws8

# Move to workspace with focused container
bindsym $mod+Shift+1 move container to workspace $ws1; workspace $ws1
bindsym $mod+Shift+2 move container to workspace $ws2; workspace $ws2
bindsym $mod+Shift+3 move container to workspace $ws3; workspace $ws3
bindsym $mod+Shift+4 move container to workspace $ws4; workspace $ws4
bindsym $mod+Shift+5 move container to workspace $ws5; workspace $ws5
bindsym $mod+Shift+6 move container to workspace $ws6; workspace $ws6
bindsym $mod+Shift+7 move container to workspace $ws7; workspace $ws7
bindsym $mod+Shift+8 move container to workspace $ws8; workspace $ws8

# Open applications on specific workspaces
assign [class="Firefox"] $ws2
assign [class="Spotify"] $ws7
assign [class="Thunderbird"] $ws3
assign [class="Keepassx2"] $ws8
assign [class="Veracrypt"] $ws8

# Open specific applications in floating mode
for_window [title="alsamixer"] flMoating enable border pixel 1
for_window [class="Calamares"] floating enable border normal
for_window [class="Clipgrab"] floating enable
for_window [title="File Transfer*"] floating enable
for_window [class="Galculator"] floating enable border pixel 1
for_window [class="GParted"] floating enable border normal
for_window [title="i3_help"] floating enable sticky enable border normal
for_window [class="Lightdm-gtk-greeter-settings"] floating enable
for_window [class="Lxappearance"] floating enable sticky enable border normal
for_window [class="Manjaro-hello"] floating enable
for_window [class="Manjaro Settings Manager"] floating enable border normal
for_window [title="MuseScore: Play Panel"] floating enable
for_window [class="Nitrogen"] floating enable sticky enable border normal
for_window [class="Oblogout"] fullscreen enable
for_window [class="octopi"] floating enable
for_window [title="About Pale Moon"] floating enable
for_window [class="Pamac-manager"] floating enable
for_window [class="Pavucontrol"] floating enable
for_window [class="qt5ct"] floating enable sticky enable border normal
for_window [class="Qtconfig-qt4"] floating enable sticky enable border normal
for_window [class="Simple-scan"] floating enable border normal
for_window [class="(?i)System-config-printer.py"] floating enable border normal
for_window [class="Skype"] floating enable border normal
for_window [class="Thus"] floating enable border normal
for_window [class="Timeset-gui"] floating enable border normal
for_window [class="(?i)virtualbox"] floating enable border normal
for_window [class="Xfburn"] floating enable

# switch to workspace with urgent window automatically
for_window [urgent=latest] focus

###############################################################################
############################ Startup Applications #############################
############################################################################### 
exec --no-startup-id ~/.scripts/startup.sh
exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
exec --no-startup-id nitrogen --restore; sleep 1; compton -b
exec --no-startup-id nm-applet
exec --no-startup-id blueman-applet
exec --no-startup-id xfce4-power-manager
#exec --no-startup-id pamac-tray
#exec --no-startup-id clipit
exec --no-startup-id start_conky_maia
exec_always --no-startup-id ff-theme-util
exec_always --no-startup-id fix_xcursor
exec --no-startup-id xautolock -time 10 -locker "python ~/.scripts/i3lock.py"
exec --no-startup-id nextcloud
exec --no-startup-id ~/.scripts/dotfiles.sh

###############################################################################
################################# Keybindings #################################
###############################################################################

# start a terminal
bindsym $mod+Return exec terminal 

# kill focused window
bindsym $mod+Shift+q kill

# start program launcher
bindsym $mod+d exec --no-startup-id dmenu_run

# launch categorized menu
bindsym $mod+z exec --no-startup-id morc_menu

# Screen brightness controls
bindsym XF86MonBrightnessUp exec "xbacklight -inc 10; notify-send 'brightness up'"
bindsym XF86MonBrightnessDown exec "xbacklight -dec 10; notify-send 'brightness down'"

# Application Shortcuts
bindsym $mod+F1 exec --no-startup-id ~/.scripts/dotfiles.sh
bindsym $mod+b exec firefox
bindsym $mod+e exec pcmanfm
bindsym $mod+m exec thunderbird
# bindsym $mod+t exec --no-startup-id pkill compton
# bindsym $mod+Ctrl+t exec --no-startup-id compton -b
bindsym $mod+Shift+d --release exec "killall dunst; exec notify-send 'restart dunst'"
bindsym Print exec --no-startup-id i3-scrot
bindsym $mod+Print --release exec --no-startup-id i3-scrot -w
bindsym $mod+Shift+Print --release exec --no-startup-id i3-scrot -s
bindsym $mod+Shift+h exec xdg-open /usr/share/doc/manjaro/i3_help.pdf
bindsym $mod+Ctrl+x --release exec --no-startup-id xkill

# change focus
bindsym $mod+j focus left
bindsym $mod+k focus down
bindsym $mod+l focus up
bindsym $mod+semicolon focus right

# move focused window
bindsym $mod+Shift+j move left
bindsym $mod+Shift+k move down
bindsym $mod+Shift+l move up
bindsym $mod+Shift+semicolon move right

# split orientation
bindsym $mod+h split h;exec notify-send 'tile horizontally'
bindsym $mod+v split v;exec notify-send 'tile vertically'
bindsym $mod+q split toggle

# toggle fullscreen mode for the focused container
bindsym $mod+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
# bindsym $mod+s layout stacking
# bindsym $mod+w layout tabbed
# bindsym $mod+e layout toggle split

# toggle tiling / floating
bindsym $mod+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym $mod+space focus mode_toggle

# toggle sticky
bindsym $mod+Shift+s sticky toggle

# focus the parent container
bindsym $mod+a focus parent

# move the currently focused window to the scratchpad
bindsym $mod+Shift+minus move scratchpad

# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym $mod+minus scratchpad show

#navigate workspaces next / previous
bindsym $mod+Ctrl+semicolon workspace next
bindsym $mod+Ctrl+j workspace prev


# reload the configuration file
bindsym $mod+Shift+c reload

# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym $mod+Shift+r restart

# exit i3 (logs you out of your X session)
# bindsym $mod+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# Set shut down, restart and locking features
bindsym $mod+0 mode "$mode_system"
set $mode_system (l)ock, (e)xit, switch_(u)ser, (s)uspend, (h)ibernate, (r)eboot, (Shift+s)hutdown
mode "$mode_system" {
    bindsym l exec --no-startup-id "python ~/.scripts/i3lock.py", mode "default"
    bindsym s exec --no-startup-id i3exit suspend, mode "default"
    bindsym u exec --no-startup-id i3exit switch_user, mode "default"
    bindsym e exec --no-startup-id i3exit logout, mode "default"
    bindsym h exec --no-startup-id i3exit hibernate, mode "default"
    bindsym r exec --no-startup-id i3exit reboot, mode "default"
    bindsym Shift+s exec --no-startup-id i3exit shutdown, mode "default"

    # exit system mode: "Enter" or "Escape"
    bindsym Return mode "default"
    bindsym Escape mode "default"
}

# Resize window (you can also use the mouse for that)
bindsym $mod+r mode "resize"
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode
        bindsym j resize shrink width 5 px or 5 ppt
        bindsym k resize grow height 5 px or 5 ppt
        bindsym l resize shrink height 5 px or 5 ppt
        bindsym semicolon resize grow width 5 px or 5 ppt

        # exit resize mode: Enter or Escape
	bindsym $mod+g mode "default"
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

# Lock screen
bindsym $mod+9 exec --no-startup-id "python ~/.scripts/i3lock.py"

# hide/unhide i3status bar
bindsym $mod+Alt_L bar mode toggle

# Color palette used for the terminal ( ~/.extend.Xresources file )
# Colors are gathered based on the documentation:
# https://i3wm.org/docs/userguide.html#xresources
# Change the variable name at the place you want to match the color
# of your terminal like this:
# [example]
# If you want your bar to have the same background color as your 
# terminal background change the line 362 from:
# background  $i3_background
# to:
# background $term_background
# Same logic applied to everything else.
# set_from_resource $term_background background
# set_from_resource $term_foreground foreground
# set_from_resource $term_color0     color0
# set_from_resource $term_color1     color1
# set_from_resource $term_color2     color2
# set_from_resource $term_color3     color3
# set_from_resource $term_color4     color4
# set_from_resource $term_color5     color5
# set_from_resource $term_color6     color6
# set_from_resource $term_color7     color7
# set_from_resource $term_color8     color8
# set_from_resource $term_color9     color9
# set_from_resource $term_color10    color10
# set_from_resource $term_color11    color11
# set_from_resource $term_color12    color12
# set_from_resource $term_color13    color13
# set_from_resource $term_color14    color14
# set_from_resource $term_color15    color15

# Color palette used for i3 
# Variables are set based on the documentation:
# https://i3wm.org/dovs/userguide.html#variables
# Changing the value of one of the variables will
# effect all the areas with the same color.
set $i3_color1          #f9faf9
set $i3_color2          #595b5b
set $i3_color3          #353836
set $i3_color4          #16a085
set $i3_color5          #fdf6e3
set $i3_color6          #eee8d5
set $i3_color7          #e5201d
set $i3_color8          #808380
set $i3_color9          #434745
set $i3_color10         #454948
set $i3_color11         #80fff9
set $i3_color12         #fdf6e3
set $i3_color13         #cb4b16
set $i3_color14         #268bd2
set $i3_color15         #000000
set $i3_color16         #ffffff
set $i3_color17         #0c0c0c

# Start i3bar to display a workspace bar (plus the system information i3status if available)
bar {
	status_command ~/.scripts/conkyi3
	position top

	font xft:Noto Sans 10
#	strip_workspace_numbers yes

    colors {
        separator  $i3_color3
	background $i3_color10
	statusline $i3_color1
	
#				border		bground		text
	focused_workspace	$i3_color8	$i3_color4	$i3_color16
	inactive_workspace	$i3_color8	$i3_color10	$i3_color16
	urgent_workspace	$i3_color8	$i3_color4	$i3_color16
    }
}

# Theme colors
# class                 border      backgr.     text        indic.      child_border
client.focused          $i3_color4  $i3_color8  $i3_color11 $i3_color12
client.focused_inactive $i3_color9  $i3_color9  $i3_color4  $i3_color10
client.unfocused        $i3_color9  $i3_color9  $i3_color4  $i3_color10
client.urgent           $i3_color13 $i3_color12 $i3_color4  $i3_color14
client.placeholder      $i3_color15 $i3_color17 $i3_color16 $i3_color15 $i3_color17

client.background       $i3_color10

#############################
### settings for i3-gaps: ###
#############################

# Set inner/outer gaps
gaps inner 15
gaps outer -4

# Smart gaps (gaps used if only more than one container on the workspace)
smart_gaps on

# Smart borders (draw borders around container only if it is not the only container on this workspace) 
# on|no_gaps (on=always activate and no_gaps=only activate if the gap size to the edge of the screen is 0)
smart_borders on

# Press $mod+Shift+g to enter the gap mode. Choose o or i for modifying outer/inner gaps. Press one of + / - (in-/decrement for current workspace) or 0 (remove gaps for current workspace). If you also press Shift with these keys, the change will be global for all workspaces.
set $mode_gaps Gaps: (o) outer, (i) inner
set $mode_gaps_outer Outer Gaps: +|-|0 (local), Shift + +|-|0 (global)
set $mode_gaps_inner Inner Gaps: +|-|0 (local), Shift + +|-|0 (global)
bindsym $mod+Shift+g mode "$mode_gaps"

mode "$mode_gaps" {
        bindsym o      mode "$mode_gaps_outer"
        bindsym i      mode "$mode_gaps_inner"
	bindsym $mod+g mode "default"
        bindsym Return mode "default"
        bindsym Escape mode "default"
}
mode "$mode_gaps_inner" {
        bindsym plus  gaps inner current plus 5
        bindsym minus gaps inner current minus 5
        bindsym 0     gaps inner current set 0

        bindsym Shift+plus  gaps inner all plus 5
        bindsym Shift+minus gaps inner all minus 5
        bindsym Shift+0     gaps inner all set 0

	bindsym $mod+g mode "default"
        bindsym Return mode "default"
        bindsym Escape mode "default"
}
mode "$mode_gaps_outer" {
        bindsym plus  gaps outer current plus 5
        bindsym minus gaps outer current minus 5
        bindsym 0     gaps outer current set 0

        bindsym Shift+plus  gaps outer all plus 5
        bindsym Shift+minus gaps outer all minus 5
        bindsym Shift+0     gaps outer all set 0

	bindsym $mod+g mode "default"
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

