Added polybar and neofetch

emacs/.emacs.d/init.el

@@ -1,2 +1,16 @@
 (package-initialize)
 (org-babel-load-file "~/.emacs.d/config.org")
+(custom-set-variables
+ ;; custom-set-variables was added by Custom.
+ ;; If you edit it by hand, you could mess it up, so be careful.
+ ;; Your init file should contain only one such instance.
+ ;; If there is more than one, they won't work right.
+ '(package-selected-packages
+   (quote
+    (smartparens rainbow-mode rainbow-delimiters ox-twbs material-theme google-this flycheck eclim counsel auto-complete-auctex auto-complete auctex anaconda-mode use-package))))
+(custom-set-faces
+ ;; custom-set-faces was added by Custom.
+ ;; If you edit it by hand, you could mess it up, so be careful.
+ ;; Your init file should contain only one such instance.
+ ;; If there is more than one, they won't work right.
+ )

i3/.config/cava/config

@@ -0,0 +1,140 @@
+## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+ 
+# Accepts only non-negative values.
+; framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. Autosens must be turned off for this to take effect.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-200). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+; bars = 0
+; bar_width = 2
+; bar_spacing = 1
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'pulse', 'alsa' or 'fifo'.
+# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+# 
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+; method = pulse
+; source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+
+
+[output]
+
+# Ouput method. Can be 'ncurses', 'noncurses' or 'raw'. 
+# 'noncurses' is for systems that does not suport ncurses.
+# 'raw' is a 16 bit data stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+; method = ncurses
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' averages both channels and outputs left to right lowest to highest frequencies.
+; channels = stereo
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+
+
+[color]
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires a
+# terminal that can change color definitions such as Gnome-terminal or rxvt.
+; background = black
+; foreground = blue
+
+# Gradient mode, only hex defined colors are supported, background must also be defined in hex
+# or remain commented out. 1 = on, 0 = off. Warning: for certain terminal emulators cava will
+# not able to restore color definitions on exit, simply restart your terminal to restore colors.
+gradient = 1
+# Quepal
+; gradient_color_1 = '#11998e'
+; gradient_color_2 = '#38ef7d'
+# Teal Love
+gradient_color_1 = '#11FFBD'
+gradient_color_2 = '#AAFFA9'
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+; integral = 70
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable. 
+; monstercat = 1
+; waves = 0;
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+; gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+; ignore = 0
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more then one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble

i3/.config/i3/config

@@ -41,14 +41,14 @@ bindsym $mod+Ctrl+m exec termite -e 'alsamixer'
 ################################################################################################
 
 # Workspace names
-set $ws1 ""
+set $ws1 
-set $ws2 ""
+set $ws2 
-set $ws3 ""
+set $ws3 
-set $ws4 ""
+set $ws4 
-set $ws5 ""
+set $ws5 
-set $ws6 ""
+set $ws6 
-set $ws7 ""
+set $ws7 
-set $ws8 ""
+set $ws8 
 
 # switch to workspace
 bindsym $mod+1 workspace $ws1
@@ -90,27 +90,18 @@ assign [class="Veracrypt"] $ws8
 # Open specific applications in floating mode
 for_window [title="alsamixer"] flMoating enable border pixel 1
 for_window [class="Calamares"] floating enable border normal
-for_window [class="Clipgrab"] floating enable
 for_window [title="File Transfer*"] floating enable
 for_window [class="Galculator"] floating enable border pixel 1
 for_window [class="GParted"] floating enable border normal
 for_window [title="i3_help"] floating enable sticky enable border normal
 for_window [class="Lightdm-gtk-greeter-settings"] floating enable
 for_window [class="Lxappearance"] floating enable sticky enable border normal
-for_window [class="Manjaro-hello"] floating enable
-for_window [class="Manjaro Settings Manager"] floating enable border normal
 for_window [title="MuseScore: Play Panel"] floating enable
 for_window [class="Nitrogen"] floating enable sticky enable border normal
 for_window [class="Oblogout"] fullscreen enable
 for_window [class="octopi"] floating enable
-for_window [title="About Pale Moon"] floating enable
-for_window [class="Pamac-manager"] floating enable
 for_window [class="Pavucontrol"] floating enable
-for_window [class="qt5ct"] floating enable sticky enable border normal
-for_window [class="Qtconfig-qt4"] floating enable sticky enable border normal
-for_window [class="Simple-scan"] floating enable border normal
 for_window [class="(?i)System-config-printer.py"] floating enable border normal
-for_window [class="Skype"] floating enable border normal
 for_window [class="Thus"] floating enable border normal
 for_window [class="Timeset-gui"] floating enable border normal
 for_window [class="(?i)virtualbox"] floating enable border normal
@@ -127,14 +118,11 @@ exec --no-startup-id /usr/lib/polkit-gnome/polkit-gnome-authentication-agent-1
 exec --no-startup-id nitrogen --restore; sleep 1; compton -b
 exec --no-startup-id nm-applet
 exec --no-startup-id blueman-applet
-exec --no-startup-id xfce4-power-manager
-exec_always --no-startup-id ff-theme-util
-exec_always --no-startup-id fix_xcursor
 exec --no-startup-id xautolock -time 10 -locker "python ~/.scripts/i3lock.py"
-exec --no-startup-id nextcloud
+exec --no-startup-id Nextcloud
 exec --no-startup-id emacs --daemon
-
+exec --no-startup-id udiskie
-
+exec_always --no-startup-id polybar beep
 ###############################################################################
 ################################# Keybindings #################################
 ###############################################################################
@@ -146,22 +134,17 @@ bindsym $mod+Return exec termite
 bindsym $mod+Shift+q kill
 
 # start program launcher
-bindsym $mod+d exec --no-startup-id dmenu_run
+bindsym $mod+d exec --no-startup-id rofi -show run
-
-# launch categorized menu
-bindsym $mod+z exec --no-startup-id morc_menu
 
 # Screen brightness controls
 bindsym XF86MonBrightnessUp exec "xbacklight -inc 10; notify-send 'brightness up'"
 bindsym XF86MonBrightnessDown exec "xbacklight -dec 10; notify-send 'brightness down'"
 
 # Application Shortcuts
-bindsym $mod+b exec firefox
+bindsym $mod+b exec env GTK_THEME=Materia:light waterfox
 bindsym $mod+e exec pcmanfm
 bindsym $mod+m exec thunderbird
-# bindsym $mod+t exec --no-startup-id pkill compton
+
-# bindsym $mod+Ctrl+t exec --no-startup-id compton -b
-bindsym $mod+Shift+d --release exec "killall dunst; exec notify-send 'restart dunst'"
 bindsym Print exec --no-startup-id i3-scrot
 bindsym $mod+Print --release exec --no-startup-id i3-scrot -w
 bindsym $mod+Shift+Print --release exec --no-startup-id i3-scrot -s
@@ -188,11 +171,6 @@ bindsym $mod+q split toggle
 # toggle fullscreen mode for the focused container
 bindsym $mod+f fullscreen toggle
 
-# change container layout (stacked, tabbed, toggle split)
-# bindsym $mod+s layout stacking
-# bindsym $mod+w layout tabbed
-# bindsym $mod+e layout toggle split
-
 # toggle tiling / floating
 bindsym $mod+Shift+space floating toggle
 
@@ -228,15 +206,12 @@ bindsym $mod+Shift+r restart
 
 # Set shut down, restart and locking features
 bindsym $mod+0 mode "$mode_system"
-set $mode_system (l)ock, (e)xit, switch_(u)ser, (s)uspend, (h)ibernate, (r)eboot, (Shift+s)hutdown
+set $mode_system (l)ock, log_o(u)t, (r)eboot, (Shift+s)hutdown
 mode "$mode_system" {
     bindsym l exec --no-startup-id "python ~/.scripts/i3lock.py", mode "default"
-    bindsym s exec --no-startup-id i3exit suspend, mode "default"
+    bindsym u exec --no-startup-id dm-tool lock, mode "default"
-    bindsym u exec --no-startup-id i3exit switch_user, mode "default"
+    bindsym r exec --no-startup-id reboot, mode "default"
-    bindsym e exec --no-startup-id i3exit logout, mode "default"
+    bindsym Shift+s exec --no-startup-id poweroff, mode "default"
-    bindsym h exec --no-startup-id i3exit hibernate, mode "default"
-    bindsym r exec --no-startup-id i3exit reboot, mode "default"
-    bindsym Shift+s exec --no-startup-id i3exit shutdown, mode "default"
 
     # exit system mode: "Enter" or "Escape"
     bindsym Return mode "default"
@@ -261,9 +236,6 @@ mode "resize" {
 # Lock screen
 bindsym $mod+9 exec --no-startup-id "python ~/.scripts/i3lock.py"
 
-# hide/unhide i3status bar
-bindsym $mod+Alt_L bar mode toggle
-
 # Color palette used for the terminal ( ~/.extend.Xresources file )
 # Colors are gathered based on the documentation:
 # https://i3wm.org/docs/userguide.html#xresources
@@ -318,25 +290,6 @@ set $i3_color15         #000000
 set $i3_color16         #ffffff
 set $i3_color17         #0c0c0c
 
-# Start i3bar to display a workspace bar (plus the system information i3status if available)
-bar {
-	status_command ~/.scripts/conkyi3
-	position top
-
-	font xft:Noto Sans 10
-#	strip_workspace_numbers yes
-
-    colors {
-        separator  $i3_color3
-	background $i3_color10
-	statusline $i3_color1
-	
-#				border		bground		text
-	focused_workspace	$i3_color8	$i3_color4	$i3_color16
-	inactive_workspace	$i3_color8	$i3_color10	$i3_color16
-	urgent_workspace	$i3_color8	$i3_color4	$i3_color16
-    }
-}
 
 # Theme colors
 # class                 border      backgr.     text        indic.      child_border

i3/.config/neofetch/config.conf

@@ -0,0 +1,732 @@
+# Neofetch config file
+# https://github.com/dylanaraps/neofetch
+
+
+# See this wiki page for more info:
+# https://github.com/dylanaraps/neofetch/wiki/Customizing-Info
+print_info() {
+    info title
+    info underline
+
+    info "OS" distro
+    info "Host" model
+    info "Kernel" kernel
+    info "Uptime" uptime
+    info "Packages" packages
+    info "Shell" shell
+    info "Resolution" resolution
+    info "DE" de
+    info "WM" wm
+    info "WM Theme" wm_theme
+    info "Theme" theme
+    info "Icons" icons
+    info "Terminal" term
+    info "Terminal Font" term_font
+    info "CPU" cpu
+    info "GPU" gpu
+    info "Memory" memory
+
+    # info "GPU Driver" gpu_driver  # Linux only
+    # info "CPU Usage" cpu_usage
+    # info "Disk" disk
+    # info "Battery" battery
+    # info "Font" font
+    # info "Song" song
+    # info "Local IP" local_ip
+    # info "Public IP" public_ip
+    # info "Users" users
+    # info "Install Date" install_date
+    # info "Locale" locale  # This only works on glibc systems.
+
+    info line_break
+    info cols
+    info line_break
+}
+
+
+# Kernel
+
+
+# Shorten the output of the kernel function.
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --kernel_shorthand
+# Supports: Everything except *BSDs (except PacBSD and PC-BSD)
+#
+# Example:
+# on:  '4.8.9-1-ARCH'
+# off: 'Linux 4.8.9-1-ARCH'
+kernel_shorthand="on"
+
+
+# Distro
+
+
+# Shorten the output of the distro function
+#
+# Default:  'off'
+# Values:   'on', 'off', 'tiny'
+# Flag:     --distro_shorthand
+# Supports: Everything except Windows and Haiku
+distro_shorthand="off"
+
+# Show/Hide OS Architecture.
+# Show 'x86_64', 'x86' and etc in 'Distro:' output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --os_arch
+#
+# Example:
+# on:  'Arch Linux x86_64'
+# off: 'Arch Linux'
+os_arch="on"
+
+
+# Uptime
+
+
+# Shorten the output of the uptime function
+#
+# Default: 'on'
+# Values:  'on', 'off', 'tiny'
+# Flag:    --uptime_shorthand
+#
+# Example:
+# on:   '2 days, 10 hours, 3 mins'
+# off:  '2 days, 10 hours, 3 minutes'
+# tiny: '2d 10h 3m'
+uptime_shorthand="on"
+
+
+# Shell
+
+
+# Show the path to $SHELL
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --shell_path
+#
+# Example:
+# on:  '/bin/bash'
+# off: 'bash'
+shell_path="off"
+
+# Show $SHELL version
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --shell_version
+#
+# Example:
+# on:  'bash 4.4.5'
+# off: 'bash'
+shell_version="on"
+
+
+# CPU
+
+
+# CPU speed type
+#
+# Default: 'bios_limit'
+# Values: 'scaling_cur_freq', 'scaling_min_freq', 'scaling_max_freq', 'bios_limit'.
+# Flag:    --speed_type
+# Supports: Linux with 'cpufreq'
+# NOTE: Any file in '/sys/devices/system/cpu/cpu0/cpufreq' can be used as a value.
+speed_type="bios_limit"
+
+# CPU speed shorthand
+#
+# Default: 'off'
+# Values: 'on', 'off'.
+# Flag:    --speed_shorthand.
+# NOTE: This flag is not supported in systems with CPU speed less than 1 GHz
+#
+# Example:
+# on:    'i7-6500U (4) @ 3.1GHz'
+# off:   'i7-6500U (4) @ 3.100GHz'
+speed_shorthand="off"
+
+# Enable/Disable CPU brand in output.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_brand
+#
+# Example:
+# on:   'Intel i7-6500U'
+# off:  'i7-6500U (4)'
+cpu_brand="on"
+
+# CPU Speed
+# Hide/Show CPU speed.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --cpu_speed
+#
+# Example:
+# on:  'Intel i7-6500U (4) @ 3.1GHz'
+# off: 'Intel i7-6500U (4)'
+cpu_speed="on"
+
+# CPU Cores
+# Display CPU cores in output
+#
+# Default: 'logical'
+# Values:  'logical', 'physical', 'off'
+# Flag:    --cpu_cores
+# Support: 'physical' doesn't work on BSD.
+#
+# Example:
+# logical:  'Intel i7-6500U (4) @ 3.1GHz' (All virtual cores)
+# physical: 'Intel i7-6500U (2) @ 3.1GHz' (All physical cores)
+# off:      'Intel i7-6500U @ 3.1GHz'
+cpu_cores="logical"
+
+# CPU Temperature
+# Hide/Show CPU temperature.
+# Note the temperature is added to the regular CPU function.
+#
+# Default: 'off'
+# Values:  'C', 'F', 'off'
+# Flag:    --cpu_temp
+# Supports: Linux, BSD
+# NOTE: For FreeBSD and NetBSD-based systems, you'll need to enable
+#       coretemp kernel module. This only supports newer Intel processors.
+#
+# Example:
+# C:   'Intel i7-6500U (4) @ 3.1GHz [27.2°C]'
+# F:   'Intel i7-6500U (4) @ 3.1GHz [82.0°F]'
+# off: 'Intel i7-6500U (4) @ 3.1GHz'
+cpu_temp="off"
+
+
+# GPU
+
+
+# Enable/Disable GPU Brand
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gpu_brand
+#
+# Example:
+# on:  'AMD HD 7950'
+# off: 'HD 7950'
+gpu_brand="on"
+
+# Which GPU to display
+#
+# Default: 'all'
+# Values:  'all', 'dedicated', 'integrated'
+# Flag:    --gpu_type
+# Supports: Linux
+#
+# Example:
+# all:
+#   GPU1: AMD HD 7950
+#   GPU2: Intel Integrated Graphics
+#
+# dedicated:
+#   GPU1: AMD HD 7950
+#
+# integrated:
+#   GPU1: Intel Integrated Graphics
+gpu_type="all"
+
+
+# Resolution
+
+
+# Display refresh rate next to each monitor
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --refresh_rate
+# Supports: Doesn't work on Windows.
+#
+# Example:
+# on:  '1920x1080 @ 60Hz'
+# off: '1920x1080'
+refresh_rate="off"
+
+
+# Gtk Theme / Icons / Font
+
+
+# Shorten output of GTK Theme / Icons / Font
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --gtk_shorthand
+#
+# Example:
+# on:  'Numix, Adwaita'
+# off: 'Numix [GTK2], Adwaita [GTK3]'
+gtk_shorthand="off"
+
+
+# Enable/Disable gtk2 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk2
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Adwaita [GTK3]'
+gtk2="on"
+
+# Enable/Disable gtk3 Theme / Icons / Font
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --gtk3
+#
+# Example:
+# on:  'Numix [GTK2], Adwaita [GTK3]'
+# off: 'Numix [GTK2]'
+gtk3="on"
+
+
+# IP Address
+
+
+# Website to ping for the public IP
+#
+# Default: 'http://ident.me'
+# Values:  'url'
+# Flag:    --ip_host
+public_ip_host="http://ident.me"
+
+
+# Disk
+
+
+# Which disks to display.
+# The values can be any /dev/sdXX, mount point or directory.
+# NOTE: By default we only show the disk info for '/'.
+#
+# Default: '/'
+# Values:  '/', '/dev/sdXX', '/path/to/drive'.
+# Flag:    --disk_show
+#
+# Example:
+# disk_show=('/' '/dev/sdb1'):
+#      'Disk (/): 74G / 118G (66%)'
+#      'Disk (/mnt/Videos): 823G / 893G (93%)'
+#
+# disk_show=('/'):
+#      'Disk (/): 74G / 118G (66%)'
+#
+disk_show=('/')
+
+# Disk subtitle.
+# What to append to the Disk subtitle.
+#
+# Default: 'mount'
+# Values:  'mount', 'name', 'dir'
+# Flag:    --disk_subtitle
+#
+# Example:
+# name:   'Disk (/dev/sda1): 74G / 118G (66%)'
+#         'Disk (/dev/sdb2): 74G / 118G (66%)'
+#
+# mount:  'Disk (/): 74G / 118G (66%)'
+#         'Disk (/mnt/Local Disk): 74G / 118G (66%)'
+#         'Disk (/mnt/Videos): 74G / 118G (66%)'
+#
+# dir:    'Disk (/): 74G / 118G (66%)'
+#         'Disk (Local Disk): 74G / 118G (66%)'
+#         'Disk (Videos): 74G / 118G (66%)'
+disk_subtitle="mount"
+
+
+# Song
+
+
+# Print the Artist and Title on separate lines
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flag:    --song_shorthand
+#
+# Example:
+# on:  'Artist: The Fratellis'
+#      'Song: Chelsea Dagger'
+#
+# off: 'Song: The Fratellis - Chelsea Dagger'
+song_shorthand="off"
+
+
+# Install Date
+
+
+# Whether to show the time in the output
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --install_time
+#
+# Example:
+# on:  'Thu 14 Apr 2016 11:50 PM'
+# off: 'Thu 14 Apr 2016'
+install_time="on"
+
+# Set time format in the output
+#
+# Default: '24h'
+# Values:  '12h', '24h'
+# Flag:    --install_time_format
+#
+# Example:
+# 12h: 'Thu 14 Apr 2016 11:50 PM'
+# 24h: 'Thu 14 Apr 2016 23:50'
+install_time_format="12h"
+
+
+# Text Colors
+
+
+# Text Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --colors
+#
+# Each number represents a different part of the text in
+# this order: 'title', '@', 'underline', 'subtitle', 'colon', 'info'
+#
+# Example:
+# colors=(distro)      - Text is colored based on Distro colors.
+# colors=(4 6 1 8 8 6) - Text is colored in the order above.
+colors=(distro)
+
+
+# Text Options
+
+
+# Toggle bold text
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bold
+bold="on"
+
+# Enable/Disable Underline
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --underline
+underline_enabled="on"
+
+# Underline character
+#
+# Default:  '-'
+# Values:   'string'
+# Flag:     --underline_char
+underline_char="-"
+
+
+# Color Blocks
+
+
+# Color block range
+# The range of colors to print.
+#
+# Default:  '0', '7'
+# Values:   'num'
+# Flag:     --block_range
+#
+# Example:
+#
+# Display colors 0-7 in the blocks.  (8 colors)
+# neofetch --block_range 0 7
+#
+# Display colors 0-15 in the blocks. (16 colors)
+# neofetch --block_range 0 15
+block_range=(0 7)
+
+# Toggle color blocks
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --color_blocks
+color_blocks="on"
+
+# Color block width in spaces
+#
+# Default:  '3'
+# Values:   'num'
+# Flag:     --block_width
+block_width=3
+
+# Color block height in lines
+#
+# Default:  '1'
+# Values:   'num'
+# Flag:     --block_height
+block_height=1
+
+
+# Progress Bars
+
+
+# Bar characters
+#
+# Default:  '-', '='
+# Values:   'string', 'string'
+# Flag:     --bar_char
+#
+# Example:
+# neofetch --bar_char 'elapsed' 'total'
+# neofetch --bar_char '-' '='
+bar_char_elapsed="-"
+bar_char_total="="
+
+# Toggle Bar border
+#
+# Default:  'on'
+# Values:   'on', 'off'
+# Flag:     --bar_border
+bar_border="on"
+
+# Progress bar length in spaces
+# Number of chars long to make the progress bars.
+#
+# Default:  '15'
+# Values:   'num'
+# Flag:     --bar_length
+bar_length=15
+
+# Progress bar colors
+# When set to distro, uses your distro's logo colors.
+#
+# Default:  'distro', 'distro'
+# Values:   'distro', 'num'
+# Flag:     --bar_colors
+#
+# Example:
+# neofetch --bar_colors 3 4
+# neofetch --bar_colors distro 5
+bar_color_elapsed="distro"
+bar_color_total="distro"
+
+
+# Info display
+# Display a bar with the info.
+#
+# Default: 'off'
+# Values:  'bar', 'infobar', 'barinfo', 'off'
+# Flags:   --cpu_display
+#          --memory_display
+#          --battery_display
+#          --disk_display
+#
+# Example:
+# bar:     '[---=======]'
+# infobar: 'info [---=======]'
+# barinfo: '[---=======] info'
+# off:     'info'
+cpu_display="off"
+memory_display="off"
+battery_display="off"
+disk_display="off"
+
+
+# Backend Settings
+
+
+# Image backend.
+#
+# Default:  'ascii'
+# Values:   'ascii', 'caca', 'catimg', 'jp2a', 'iterm2', 'off', 'tycat', 'w3m'
+# Flag:     --backend
+image_backend="ascii"
+
+# Image Source
+#
+# Which image or ascii file to display.
+#
+# Default:  'auto'
+# Values:   'auto', 'ascii', 'wallpaper', '/path/to/img', '/path/to/ascii', '/path/to/dir/'
+# Flag:     --source
+#
+# NOTE: 'auto' will pick the best image source for whatever image backend is used.
+#       In ascii mode, distro ascii art will be used and in an image mode, your
+#       wallpaper will be used.
+image_source="auto"
+
+
+# Ascii Options
+
+
+# Ascii distro
+# Which distro's ascii art to display.
+#
+# Default: 'auto'
+# Values:  'auto', 'distro_name'
+# Flag:    --ascii_distro
+#
+# NOTE: Arch and Ubuntu have 'old' logo variants.
+#       Change this to 'arch_old' or 'ubuntu_old' to use the old logos.
+# NOTE: Ubuntu has flavor variants.
+#       Change this to 'Lubuntu', 'Xubuntu', 'Ubuntu-GNOME' or 'Ubuntu-Budgie' to use the flavors.
+# NOTE: Arch, Crux and Gentoo have a smaller logo variant.
+#       Change this to 'arch_small', 'crux_small' or 'gentoo_small' to use the small logos.
+ascii_distro="auto"
+
+# Ascii Colors
+#
+# Default:  'distro'
+# Values:   'distro', 'num' 'num' 'num' 'num' 'num' 'num'
+# Flag:     --ascii_colors
+#
+# Example:
+# ascii_colors=(distro)      - Ascii is colored based on Distro colors.
+# ascii_colors=(4 6 1 8 8 6) - Ascii is colored using these colors.
+ascii_colors=(distro)
+
+# Bold ascii logo
+# Whether or not to bold the ascii logo.
+#
+# Default: 'on'
+# Values:  'on', 'off'
+# Flag:    --ascii_bold
+ascii_bold="on"
+
+
+# Image Options
+
+
+# Image loop
+# Setting this to on will make neofetch redraw the image constantly until
+# Ctrl+C is pressed. This fixes display issues in some terminal emulators.
+#
+# Default:  'off'
+# Values:   'on', 'off'
+# Flag:     --loop
+image_loop="off"
+
+# Thumbnail directory
+#
+# Default: '~/.cache/thumbnails/neofetch'
+# Values:  'dir'
+thumbnail_dir="${XDG_CACHE_HOME:-${HOME}/.cache}/thumbnails/neofetch"
+
+# Crop mode
+#
+# Default:  'normal'
+# Values:   'normal', 'fit', 'fill'
+# Flag:     --crop_mode
+#
+# See this wiki page to learn about the fit and fill options.
+# https://github.com/dylanaraps/neofetch/wiki/What-is-Waifu-Crop%3F
+crop_mode="normal"
+
+# Crop offset
+# Note: Only affects 'normal' crop mode.
+#
+# Default:  'center'
+# Values:   'northwest', 'north', 'northeast', 'west', 'center'
+#           'east', 'southwest', 'south', 'southeast'
+# Flag:     --crop_offset
+crop_offset="center"
+
+# Image size
+# The image is half the terminal width by default.
+#
+# Default: 'auto'
+# Values:  'auto', '00px', '00%', 'none'
+# Flags:   --image_size
+#          --size
+image_size="auto"
+
+# Ggap between image and text
+#
+# Default: '3'
+# Values:  'num', '-num'
+# Flag:    --gap
+gap=3
+
+# Image offsets
+# Only works with the w3m backend.
+#
+# Default: '0'
+# Values:  'px'
+# Flags:   --xoffset
+#          --yoffset
+yoffset=0
+xoffset=0
+
+# Image background color
+# Only works with the w3m backend.
+#
+# Default: ''
+# Values:  'color', 'blue'
+# Flag:    --bg_color
+background_color=
+
+
+# Scrot Options
+
+
+# Whether or not to always take a screenshot
+# You can manually take a screenshot with "--scrot" or "-s"
+#
+# Default: 'off'
+# Values:  'on', 'off'
+# Flags:   --scrot
+#          -s
+scrot="off"
+
+# Screenshot Program
+# Neofetch will automatically use whatever screenshot tool
+# is installed on your system.
+#
+# If 'neofetch -v' says that it couldn't find a screenshot
+# tool or you're using a custom tool then you can change
+# the option below to a custom command.
+#
+# Default: 'auto'
+# Values:  'auto' 'cmd -flags'
+# Flag:    --scrot_cmd
+scrot_cmd="auto"
+
+# Screenshot Filename
+# What to name the screenshots
+#
+# Default: 'neofetch-$(date +%F-%I-%M-%S-${RANDOM}).png'
+# Values:  'string'
+# Flag:    --scrot_name
+scrot_name="neofetch-$(date +%F-%I-%M-%S-${RANDOM}).png"
+
+# Image upload host
+# Where to upload the image.
+#
+# Default: 'teknik'
+# Values:  'imgur', 'teknik'
+# Flag:    --image_host
+#
+# NOTE: If you'd like another image host to be added to Neofetch.
+#       Open an issue on github.
+image_host="teknik"
+
+
+# Misc Options
+
+# Stdout mode
+# Turn off all colors and disables image backend (ASCII/Image).
+# Useful for piping into another command.
+# Default: 'off'
+# Values: 'on', 'off'
+stdout="off"
+
+# Config version.
+#
+# NOTE: Don't change this value, neofetch reads this to determine
+# how to handle backwards compatibility.
+config_version="3.3.0"

i3/.config/polybar/config

@@ -0,0 +1,403 @@
+;=====================================================
+;
+;   To learn more about how to configure Polybar
+;   go to https://github.com/jaagr/polybar
+;
+;   The README contains alot of information
+;
+;=====================================================
+
+[colors]
+;background = ${xrdb:color0:#222}
+background = #222
+background-alt = #444
+;foreground = ${xrdb:color7:#222}
+foreground = #dfdfdf
+foreground-alt = #555
+primary = #ffb52a
+secondary = #e60053
+alert = #bd2c40
+
+[bar/beep]
+;monitor = ${env:MONITOR:HDMI-1}
+width = 100%
+height = 27
+;offset-x = 1%
+;offset-y = 1%
+radius = 6.0
+fixed-center = false
+
+background = ${colors.background}
+foreground = ${colors.foreground}
+
+line-size = 3
+line-color = #f00
+
+border-size = 4
+border-color = #00000000
+
+padding-left = 0
+padding-right = 2
+
+module-margin-left = 1
+module-margin-right = 2
+
+font-0 = fixed:pixelsize=10;1
+font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
+font-2 = siji:pixelsize=10;1
+
+modules-left = i3
+modules-center = 
+modules-right = filesystem xbacklight volume xkeyboard memory cpu wlan eth battery temperature date powermenu
+
+tray-position = right
+tray-padding = 2
+;tray-transparent = true
+;tray-background = #0063ff
+
+;wm-restack = bspwm
+;wm-restack = i3
+
+;override-redirect = true
+
+;scroll-up = bspwm-desknext
+;scroll-down = bspwm-deskprev
+
+;scroll-up = i3wm-wsnext
+;scroll-down = i3wm-wsprev
+
+cursor-click = pointer
+cursor-scroll = ns-resize
+
+[module/xwindow]
+type = internal/xwindow
+label = %title:0:30:...%
+
+[module/xkeyboard]
+type = internal/xkeyboard
+blacklist-0 = num lock
+
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-prefix-underline = ${colors.secondary}
+
+label-layout = %layout%
+label-layout-underline = ${colors.secondary}
+
+label-indicator-padding = 2
+label-indicator-margin = 1
+label-indicator-background = ${colors.secondary}
+label-indicator-underline = ${colors.secondary}
+
+[module/filesystem]
+type = internal/fs
+interval = 25
+
+mount-0 = /
+
+label-mounted = %{F#0a81f5}%mountpoint%%{F-}: %percentage_used%%
+label-unmounted = %mountpoint% not mounted
+label-unmounted-foreground = ${colors.foreground-alt}
+
+
+[module/i3]
+type = internal/i3
+
+; Only show workspaces defined on the same output as the bar
+;
+; Useful if you want to show monitor specific workspaces
+; on different bars
+;
+; Default: false
+pin-workspaces = true
+
+; This will split the workspace name on ':'
+; Default: false
+strip-wsnumbers = true
+
+; Sort the workspaces by index instead of the default
+; sorting that groups the workspaces by output
+; Default: false
+index-sort = true
+
+; Create click handler used to focus workspace
+; Default: true
+enable-click = false
+
+; Create scroll handlers used to cycle workspaces
+; Default: true
+enable-scroll = false
+
+; Wrap around when reaching the first/last workspace
+; Default: true
+wrapping-scroll = false
+
+; Set the scroll cycle direction 
+; Default: true
+reverse-scroll = false
+
+; Use fuzzy (partial) matching on labels when assigning 
+; icons to workspaces
+; Example: code;♚ will apply the icon to all workspaces 
+; containing 'code' in the label
+; Default: false
+fuzzy-match = true
+
+ws-icon-0 = 1;
+ws-icon-1 = 2;
+ws-icon-2 = 3;
+ws-icon-3 = 4;
+ws-icon-4 = 5;
+ws-icon-5 = 6;
+ws-icon-6 = 7;
+ws-icon-7 = 8;
+ws-icon-default = 
+
+; Only show workspaces on the same output as the bar
+pin-workspaces = true
+
+label-mode-padding = 2
+label-mode-foreground = #000
+label-mode-background = ${colors.primary}
+
+; focused = Active workspace on focused monitor
+label-focused = %index%
+label-focused-background = ${module/bspwm.label-focused-background}
+label-focused-underline = ${module/bspwm.label-focused-underline}
+label-focused-padding = ${module/bspwm.label-focused-padding}
+
+; unfocused = Inactive workspace on any monitor
+label-unfocused = %index%
+label-unfocused-padding = ${module/bspwm.label-occupied-padding}
+
+; visible = Active workspace on unfocused monitor
+label-visible = %index%
+label-visible-background = ${self.label-focused-background}
+label-visible-underline = ${self.label-focused-underline}
+label-visible-padding = ${self.label-focused-padding}
+
+; urgent = Workspace with urgency hint set
+label-urgent = %index%
+label-urgent-background = ${module/bspwm.label-urgent-background}
+label-urgent-padding = ${module/bspwm.label-urgent-padding}
+
+[module/mpd]
+type = internal/mpd
+format-online = <label-song>  <icon-prev> <icon-stop> <toggle> <icon-next>
+
+icon-prev = 
+icon-stop = 
+icon-play = 
+icon-pause = 
+icon-next = 
+
+label-song-maxlen = 25
+label-song-ellipsis = true
+
+[module/xbacklight]
+type = internal/xbacklight
+
+format = <label> <bar>
+label = BL
+
+bar-width = 10
+bar-indicator = |
+bar-indicator-foreground = #ff
+bar-indicator-font = 2
+bar-fill = ─
+bar-fill-font = 2
+bar-fill-foreground = #9f78e1
+bar-empty = ─
+bar-empty-font = 2
+bar-empty-foreground = ${colors.foreground-alt}
+
+[module/backlight-acpi]
+inherit = module/xbacklight
+type = internal/backlight
+card = intel_backlight
+
+[module/cpu]
+type = internal/cpu
+interval = 2
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #f90000
+label = %percentage:2%%
+
+[module/memory]
+type = internal/memory
+interval = 2
+format-prefix = " "
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #4bffdc
+label = %percentage_used%%
+
+[module/wlan]
+type = internal/network
+interface = wlp2s0
+interval = 3.0
+
+format-connected = <ramp-signal> <label-connected>
+format-connected-underline = #9f78e1
+label-connected = %essid%
+
+format-disconnected =
+;format-disconnected = <label-disconnected>
+;format-disconnected-underline = ${self.format-connected-underline}
+;label-disconnected = %ifname% disconnected
+;label-disconnected-foreground = ${colors.foreground-alt}
+
+ramp-signal-0 = 
+ramp-signal-1 = 
+ramp-signal-2 = 
+ramp-signal-3 = 
+ramp-signal-4 = 
+ramp-signal-foreground = ${colors.foreground-alt}
+
+[module/eth]
+type = internal/network
+interface = net0
+interval = 3.0
+
+format-connected-underline = #55aa55
+format-connected-prefix = " "
+format-connected-prefix-foreground = ${colors.foreground-alt}
+label-connected = %local_ip%
+
+format-disconnected =
+;format-disconnected = <label-disconnected>
+;format-disconnected-underline = ${self.format-connected-underline}
+;label-disconnected = %ifname% disconnected
+;label-disconnected-foreground = ${colors.foreground-alt}
+
+[module/date]
+type = internal/date
+interval = 5
+
+date =
+date-alt = " %Y-%m-%d"
+
+time = %H:%M
+time-alt = %H:%M:%S
+
+format-prefix = 
+format-prefix-foreground = ${colors.foreground-alt}
+format-underline = #0a6cf5
+
+label = %date% %time%
+
+[module/volume]
+type = internal/volume
+
+format-volume = <label-volume> <bar-volume>
+label-volume = VOL
+label-volume-foreground = ${root.foreground}
+
+format-muted-prefix = " "
+format-muted-foreground = ${colors.foreground-alt}
+label-muted = sound muted
+
+bar-volume-width = 10
+bar-volume-foreground-0 = #55aa55
+bar-volume-foreground-1 = #55aa55
+bar-volume-foreground-2 = #55aa55
+bar-volume-foreground-3 = #55aa55
+bar-volume-foreground-4 = #55aa55
+bar-volume-foreground-5 = #f5a70a
+bar-volume-foreground-6 = #ff5555
+bar-volume-gradient = false
+bar-volume-indicator = |
+bar-volume-indicator-font = 2
+bar-volume-fill = ─
+bar-volume-fill-font = 2
+bar-volume-empty = ─
+bar-volume-empty-font = 2
+bar-volume-empty-foreground = ${colors.foreground-alt}
+
+[module/battery]
+type = internal/battery
+battery = BAT1
+adapter = ADP1
+full-at = 98
+
+format-charging = <animation-charging> <label-charging>
+format-charging-underline = #ffb52a
+
+format-discharging = <ramp-capacity> <label-discharging>
+format-discharging-underline = ${self.format-charging-underline}
+
+format-full-prefix = " "
+format-full-prefix-foreground = ${colors.foreground-alt}
+format-full-underline = ${self.format-charging-underline}
+
+ramp-capacity-0 = 
+ramp-capacity-1 = 
+ramp-capacity-2 = 
+ramp-capacity-foreground = ${colors.foreground-alt}
+
+animation-charging-0 = 
+animation-charging-1 = 
+animation-charging-2 = 
+animation-charging-foreground = ${colors.foreground-alt}
+animation-charging-framerate = 750
+
+[module/temperature]
+type = internal/temperature
+thermal-zone = 0
+warn-temperature = 60
+
+format = <ramp> <label>
+format-underline = #f50a4d
+format-warn = <ramp> <label-warn>
+format-warn-underline = ${self.format-underline}
+
+label = %temperature%
+label-warn = %temperature%
+label-warn-foreground = ${colors.secondary}
+
+ramp-0 = 
+ramp-1 = 
+ramp-2 = 
+ramp-foreground = ${colors.foreground-alt}
+
+[module/powermenu]
+type = custom/menu
+
+expand-right = true
+
+format-spacing = 1
+
+label-open = 
+label-open-foreground = ${colors.secondary}
+label-close =  cancel
+label-close-foreground = ${colors.secondary}
+label-separator = |
+label-separator-foreground = ${colors.foreground-alt}
+
+menu-0-0 = reboot
+menu-0-0-exec = menu-open-1
+menu-0-1 = power off
+menu-0-1-exec = menu-open-2
+
+menu-1-0 = cancel
+menu-1-0-exec = menu-open-0
+menu-1-1 = reboot
+menu-1-1-exec = sudo reboot
+
+menu-2-0 = power off
+menu-2-0-exec = sudo poweroff
+menu-2-1 = cancel
+menu-2-1-exec = menu-open-0
+
+[settings]
+screenchange-reload = true
+;compositing-background = xor
+;compositing-background = screen
+;compositing-foreground = source
+;compositing-border = over
+
+[global/wm]
+margin-top = 5
+margin-bottom = 5
+
+; vim:ft=dosini

i3/.scripts/conkyrc

@@ -12,40 +12,22 @@ override_utf8_locale no
 cpu_avg_samples 2
 TEXT
 ,[
-#Pacman
-#{"full_text":" ","color":"\#AEB404","separator":false,"separator_block_width":6},\
-#{"full_text":"[${execi 200 checkupdates | wc -l}]","color":"\#808080","separator":false,"separator_block_width":6},\
-#AUR
-#{"full_text":" ","color":"\#AEB404","separator":false,"separator_block_width":6},\
-#{"full_text":"[${execi 1900 cower -u | wc -l}]","color":"\#808080","separator":false,"separator_block_width":6},\
-#Kernel
-#{"full_text":" ","color":"\#FF4000","separator":false,"separator_block_width":6},\
-#{"full_text":"[${kernel}]","color":"\#808080","separator":false,"separator_block_width":6},\
-#{ "full_text": ": ${kernel}","color":"\#FF4000"},
 #Wifi
 {"full_text":" ","color":"\#00FF00","separator":false,"separator_block_width":6},\
 {"full_text":"[${wireless_essid wlp2s0}]","color":"\#808080","separator":false,"separator_block_width":6},\
-#{"full_text": ": [${upspeed wlp2s0}] ", "color":"\#00FF00", "separator": false, "separator_block_width":6},\
 #Finds current volume.
 {"full_text":" ","color":"\#268BD2","separator":false,"separator_block_width":6},\
 {"full_text":"${exec amixer -c 0 get Master | grep Mono: | cut -d " " -f6} ","color":"\#808080","separator":false,"separator_block_width":6},\
-#{"full_text": ": ${exec amixer -c 0 get Master | grep Mono: | cut -d " " -f6} ", "color":"\#268BD2"},
 #Brighness
 {"full_text":" ","color":"\#F7FE2E","separator":false,"separator_block_width":6},\
 {"full_text":"[${exec xbacklight| awk '{printf("%d\n",$1 + 0.5)}'}%] ","color":"\#808080","separator":false,"separator_block_width":6},\
 #{ "full_text": ": ${exec xbacklight| awk '{printf("%d\n",$1 + 0.5)}'}% ", "color":"\#F7FE2E"},
-#CPU
-#{"full_text":" ","color":"\#8D00FF","separator":false,"separator_block_width":6},\
-#{"full_text":"[$cpu%]","color":"\#808080","separator":false,"separator_block_width":6},\
-#{"full_text": " :[$cpu%] ", "color":"\#8D00FF", "separator": false, "separator_block_width":6},\
 #Battery 
 {"full_text":" ","color":"\#00FF00","separator":false,"separator_block_width":6},\
-{"full_text":"[${battery_percent BAT1}%]","color":"\#808080","separator":false,"separator_block_width":6},\
+{"full_text":"${exec cat /sys/class/power_supply/BAT1/capacity}% ","color":"\#808080","separator":false,"separator_block_width":6},\
-#{"full_text": ":[${battery_percent BAT1}%] ","color":"\#dedede"},
 #Calender/Time
 {"full_text":" ","color":"\#2E9AFE","separator":false,"separator_block_width":6},\
-{"full_text":"${time %a %b %d}","color":"\#808080","separator":false},\
+{"full_text":"${time %F}","color":"\#808080","separator":false},\
-#{"full_text": " :${time %a %d %b} ${time %H:%M:%S} ","color": "\#2E9AFE", "separator": false},
 {"full_text":" ","color":"\#0404B4","separator":false,"separator_block_width":6},\
-{"full_text":"${time %H:%M:%S} ","color":"\#808080","separator":false}
+{"full_text":"${time %T} ","color":"\#808080","separator":false}
 ]

zsh/.warprc

@@ -1,5 +1,5 @@
 
 snippets:~/.emacs.d/snippets
-Uni:/run/media/tuan/98CE9E59CE9E2F8C/Users/Tu/Documents/Uni
 dotfiles:~/.dotfiles
 PyrSniff:~/workspace/Python/PyrSniff
+Uni:~/Nextcloud/Uni/Studium