Added lazyvim

Signed-off-by: TuDatTr <tuan-dat.tran@tudattr.dev>

config/.config/alacritty/alacritty.toml

@@ -1,5 +1,5 @@
 [font]
-size = 7
+size = 12
 
 [font.bold]
 style = "Bold"

config/.config/cava/config

@@ -48,7 +48,7 @@
 # 
 # For alsa 'source' will be the capture device.
 # For fifo 'source' will be the path to fifo-file.
-; method = pulse
+method = pulse
 ; source = auto
 
 ; method = alsa

config/.config/cava/shaders/bar_spectrum.frag

@@ -0,0 +1,79 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+uniform int bar_width;    // bar width (configurable), not used here
+uniform int bar_spacing;    // space bewteen bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
+{
+    //create color based on fraction of this color and next color
+    float yr = (y - y_min) / (y_max - y_min);
+    return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    float x = u_resolution.x * fragCoord.x;
+    int bar = int(bars_count * fragCoord.x);
+
+    //calculate a bar size
+    float bar_size = u_resolution.x / bars_count;
+
+    //the y coordinate and bar values are the same
+    float y =  bars[bar];
+
+    // make sure there is a thin line at bottom
+    if (y * u_resolution.y < 1.0)
+    {
+      y = 1.0 / u_resolution.y;
+    }
+
+    //draw the bar up to current height
+    if (y > fragCoord.y)
+    {
+        //make some space between bars basen on settings
+        if (x > (bar + 1) * (bar_size) - bar_spacing)
+        {
+            fragColor = vec4(bg_color,1.0);
+        }
+        else
+        {
+            if (gradient_count == 0)
+            {
+                fragColor = vec4(fg_color,1.0);
+            }
+            else
+            {
+                //find which color in the configured gradient we are at
+                int color = int((gradient_count - 1) * fragCoord.y);
+
+                //find where on y this and next color is supposed to be
+                float y_min = color / (gradient_count - 1.0);
+                float y_max = (color + 1.0) / (gradient_count - 1.0);
+
+                //make color
+                fragColor = vec4(normalize_C(fragCoord.y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
+            }
+        }
+    }
+    else
+    {
+        fragColor = vec4(bg_color,1.0);
+    }
+}

config/.config/cava/shaders/northern_lights.frag

@@ -0,0 +1,34 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+
+uniform vec3 u_resolution; // window resolution, not used here
+
+//colors, configurable in cava config file
+uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
+uniform vec3 fg_color; // foreground color, not used here
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    int bar = int(bars_count * fragCoord.x);
+
+    float bar_y = 1.0 - abs((fragCoord.y - 0.5)) * 2.0;
+    float y = (bars[bar]) * bar_y;
+
+    float bar_x = (fragCoord.x - float(bar) / float(bars_count)) * bars_count;
+    float bar_r = 1.0 - abs((bar_x - 0.5)) * 2;
+
+    bar_r = bar_r * bar_r * 2;
+
+    // set color
+    fragColor.r = fg_color.x * y * bar_r;
+    fragColor.g = fg_color.y * y * bar_r;
+    fragColor.b = fg_color.z * y * bar_r;
+}

config/.config/cava/shaders/pass_through.vert

@@ -0,0 +1,14 @@
+#version 330
+
+
+// Input vertex data, different for all executions of this shader.
+layout(location = 0) in vec3 vertexPosition_modelspace;
+
+// Output data ; will be interpolated for each fragment.
+out vec2 fragCoord;
+
+void main()
+{
+    gl_Position =  vec4(vertexPosition_modelspace,1);
+    fragCoord  = (vertexPosition_modelspace.xy+vec2(1,1))/2.0;
+}

config/.config/i3/config

@@ -22,6 +22,7 @@ focus_follows_mouse no
 # Configure
 # border style <normal|1pixel|pixel xx|none|pixel>
 hide_edge_borders none
+default_border none
 
 ################################################################################################
 ###################################### Workspace Settings ######################################
@@ -140,6 +141,7 @@ bindsym $mod+m exec thunderbird
 bindsym Control+Print exec --no-startup-id ~/.scripts/screenshot.sh screen
 
 # Window
+
 bindsym Mod1+Sys_Req --release exec --no-startup-id ~/.scripts/screenshot.sh window
 
 # Area

config/.ssh/config

@@ -1,27 +1,17 @@
 # Services
-Host github.com
+Host github.com gitlab.com git.uni-due.de
-    Hostname github.com
     Port 22
     User git
     IdentityFile /mnt/veracrypt1/git
 
+Host github.com 
+    Hostname github.com
+
 Host gitlab.com
     Hostname gitlab.com
-    Port 22
-    User git
-    IdentityFile /mnt/veracrypt1/git
-
-Host picoCTF
-    HostName 2018shell4.picoctf.com
-    Port 22
-    User mos4
-    IdentityFile "/home/tuan/Documents/CTF/picoCTF/2018/30 - ssh-keyz/picoCTF"
 
 Host git.uni-due.de
     HostName git.uni-due.de
-    Port 22
-    User git
-    IdentityFile /mnt/veracrypt1/git
 
 Host git.tudattr.dev
     Hostname 192.168.20.12
@@ -36,31 +26,49 @@ Host madrigal
      User tudattr
      IdentityFile /mnt/veracrypt1/mikrotik_rsa
 
-Host aya01
+Host inko inko.mii
+     HostName 192.168.20.14
+
+Host naruto naruto.mii
+     HostName 192.168.20.13
+
+Host pi pi.mii
+     HostName 192.168.20.11
+
+Host aya01 aya01.mii
     HostName 192.168.20.12
+
+Host mii 
+    HostName tudattr.dev
+
+Host inko.mii pi.mii aya01.mii naruto.mii
+    ProxyJump mii
+
+Host mii pi aya01 inko naruto inko.mii pi.mii aya01.mii naruto.mii
     Port 22
     User tudattr
     IdentityFile /mnt/veracrypt1/genesis
 
-Host git.aya01
+# Work
-    HostName 192.168.20.12
+Host mini
-    Port 23231
+    HostName 100.76.45.158
+    Port 22
     User tudattr
     IdentityFile /mnt/veracrypt1/genesis
 
-Host pi
+Host tail-pi
-     HostName 192.168.20.11
+    HostName 100.93.79.94
-     Port 22
+    Port 22
-     User tudattr
+    User tuant
-     IdentityFile /mnt/veracrypt1/genesis
+    IdentityFile /mnt/veracrypt1/work/minis
 
-# Work
 Host ncs-head
     HostName 132.252.68.50
     Port 2122
     User tuan-dat.tran
     IdentityFile /mnt/veracrypt1/genesis
     ForwardX11 yes
+    ProxyJump tail-pi
 
 Host ncs-head-user
     HostName 132.252.68.50
@@ -71,62 +79,44 @@ Host ncs-head-user
 
 Host ncs2
     HostName 192.168.1.13
-    Port 22
     User tuan-dat.tran
+
+Host ncs2 ncs2-user ncs-node1 ncs-node2 ncs-node2-user ncs-node3 ncs-node4 ncs-node5 ncs-node6 ncs-node7 ncs-wedge
+    Port 22
     IdentityFile /mnt/veracrypt1/genesis
     ProxyJump ncs-head
 
 Host ncs2-user
     HostName 192.168.1.13
-    Port 22
     User user # tuan-dat.tran
-    IdentityFile /mnt/veracrypt1/genesis
-    ProxyJump ncs-head
 
 Host ncs-node1
     HostName 192.168.1.11
-    Port 22
     User user
-    IdentityFile /mnt/veracrypt1/tudattr
-    ProxyJump ncs-head
 
 Host ncs-node2
     HostName 192.168.1.7
-    Port 22
     User tuan-dat.tran
-    IdentityFile /mnt/veracrypt1/genesis
-    ProxyJump ncs-head
     ForwardX11 yes
 
 Host ncs-node2-user
     HostName 192.168.1.7
-    Port 22
     User user
-    IdentityFile /mnt/veracrypt1/tudattr
-    ProxyJump ncs-head
 
 Host ncs-node3
     Hostname 192.168.1.19
-    Port 22
     User tuan-dat.tran
-    IdentityFile /mnt/veracrypt1/genesis
     ForwardX11 yes
-    ProxyJump ncs-head
 
 Host ncs-node3-user
     Hostname 192.168.1.19
-    Port 22
     User user
     IdentityFile /mnt/veracrypt1/tudattr
     ForwardX11 yes
-    ProxyJump ncs-head
 
 Host ncs-node4
     HostName 192.168.1.9
-    Port 22
     User tuan-dat.tran
-    IdentityFile /mnt/veracrypt1/genesis
-    ProxyJump ncs-head
 
 Host ncs-node4-user
     HostName 192.168.1.9
@@ -137,18 +127,11 @@ Host ncs-node4-user
 
 Host ncs-node5
     HostName 192.168.1.15
-    Port 22
     User tuan-dat.tran
-    IdentityFile /mnt/veracrypt1/genesis
-    ProxyJump ncs-head
 
 Host ncs-node6
     Hostname 192.168.1.17
-    Port 22
     User tuan-dat.tran
-    IdentityFile /mnt/veracrypt1/genesis
-    # ForwardX11 yes
-    ProxyJump ncs-head
 
 Host ncs-node6-user
     Hostname 192.168.1.17
@@ -160,47 +143,12 @@ Host ncs-node6-user
 
 Host ncs-node7
     Hostname 192.168.1.18
-    Port 22
     User tuan-dat.tran
-    IdentityFile /mnt/veracrypt1/genesis
     ForwardX11 yes
-    ProxyJump ncs-head
 
 Host ncs-wedge
     Hostname 192.168.1.5
-    Port 22
     User user
-    IdentityFile /mnt/veracrypt1/genesis
-    # ForwardX11 yes
-    ProxyJump ncs-head
-
-Host ncs-local-server
-    HostName 192.168.1.1
-    Port 22
-    User tuan-dat.tran
-    IdentityFile /mnt/veracrypt1/tudattr
-    StrictHostKeyChecking no
-
-Host ncs-local-server-user
-    HostName 192.168.1.1
-    Port 22
-    User user
-    IdentityFile /mnt/veracrypt1/tudattr
-    StrictHostKeyChecking no
-
-Host ncs-local-server2
-    HostName 192.168.2.2
-    Port 22
-    User user
-    IdentityFile /mnt/veracrypt1/tudattr
-    StrictHostKeyChecking no
-    ProxyJump ncs-local-server
-
-Host phone
-    Hostname 192.168.30.245
-    Port 2222
-    User tuan-dat.tran
-    IdentityFile /mnt/veracrypt1/genesis
 
 Host ncs-gpu
     Hostname 192.168.1.21
@@ -210,15 +158,28 @@ Host ncs-gpu
     ForwardX11 yes
     ProxyJump ncs-head
     
-Host ncs-aws-iperf3
-    Hostname 18.185.5.191
-    Port 22
-    User ec2-user
-    IdentityFile /mnt/veracrypt1/aws_ncs.pem
-
 Host ami
     Hostname 3.72.156.214
     Port 22
     User ubuntu
     IdentityFile /mnt/veracrypt1/work/aws-rizk.pem
 
+
+## 5g IANA
+Host 5g-iana-mec
+    Hostname 192.168.100.1
+    Port 22
+    User udue
+    IdentityFile /mnt/veracrypt1/genesis
+
+Host uulm-obu0 uulm-obu1
+    Port 22
+    User user
+    ProxyJump 5g-iana-mec
+    IdentityFile /mnt/veracrypt1/genesis
+
+Host uulm-obu0 
+    Hostname 192.168.201.7
+
+Host uulm-obu1
+    Hostname 192.168.201.11

emacs/.emacs.d/config.org

@@ -28,6 +28,12 @@
   (use-package flycheck :ensure)
   (use-package solidity-mode)
   (use-package undo-tree)
+  (use-package yaml-mode
+    :config
+    (add-to-list 'auto-mode-alist '("\\.yml\\'" . yaml-mode)))
+  (use-package org-roam)
+  (use-package consult)
+  (use-package dockerfile-mode)
 #+end_src
 
 ** Evil
@@ -37,7 +43,8 @@
     (setq evil-want-keybinding nil)
     :config
     (evil-mode 1)
-    (setq evil-search-module 'evil-search))
+    (setq evil-search-module 'evil-search)
+    (setq evil-undo-system 'undo-redo))
 
   (use-package evil-collection
     :config

emacs/.emacs.d/init.el

@@ -4,7 +4,7 @@
  ;; If you edit it by hand, you could mess it up, so be careful.
  ;; Your init file should contain only one such instance.
  ;; If there is more than one, they won't work right.
- '(package-selected-packages '(evil-collection evil use-package)))
+ '(package-selected-packages '(consult org-roam evil-collection evil use-package)))
 (custom-set-faces
  ;; custom-set-faces was added by Custom.
  ;; If you edit it by hand, you could mess it up, so be careful.

vim/.config/nvim/.gitignore

@@ -0,0 +1,8 @@
+tt.*
+.tests
+doc/tags
+debug
+.repro
+foo.*
+*.log
+data

vim/.config/nvim/.neoconf.json

@@ -0,0 +1,15 @@
+{
+  "neodev": {
+    "library": {
+      "enabled": true,
+      "plugins": true
+    }
+  },
+  "neoconf": {
+    "plugins": {
+      "lua_ls": {
+        "enabled": true
+      }
+    }
+  }
+}

vim/.config/nvim/LICENSE

@@ -0,0 +1,201 @@
+                                 Apache License
+                           Version 2.0, January 2004
+                        http://www.apache.org/licenses/
+
+   TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION
+
+   1. Definitions.
+
+      "License" shall mean the terms and conditions for use, reproduction,
+      and distribution as defined by Sections 1 through 9 of this document.
+
+      "Licensor" shall mean the copyright owner or entity authorized by
+      the copyright owner that is granting the License.
+
+      "Legal Entity" shall mean the union of the acting entity and all
+      other entities that control, are controlled by, or are under common
+      control with that entity. For the purposes of this definition,
+      "control" means (i) the power, direct or indirect, to cause the
+      direction or management of such entity, whether by contract or
+      otherwise, or (ii) ownership of fifty percent (50%) or more of the
+      outstanding shares, or (iii) beneficial ownership of such entity.
+
+      "You" (or "Your") shall mean an individual or Legal Entity
+      exercising permissions granted by this License.
+
+      "Source" form shall mean the preferred form for making modifications,
+      including but not limited to software source code, documentation
+      source, and configuration files.
+
+      "Object" form shall mean any form resulting from mechanical
+      transformation or translation of a Source form, including but
+      not limited to compiled object code, generated documentation,
+      and conversions to other media types.
+
+      "Work" shall mean the work of authorship, whether in Source or
+      Object form, made available under the License, as indicated by a
+      copyright notice that is included in or attached to the work
+      (an example is provided in the Appendix below).
+
+      "Derivative Works" shall mean any work, whether in Source or Object
+      form, that is based on (or derived from) the Work and for which the
+      editorial revisions, annotations, elaborations, or other modifications
+      represent, as a whole, an original work of authorship. For the purposes
+      of this License, Derivative Works shall not include works that remain
+      separable from, or merely link (or bind by name) to the interfaces of,
+      the Work and Derivative Works thereof.
+
+      "Contribution" shall mean any work of authorship, including
+      the original version of the Work and any modifications or additions
+      to that Work or Derivative Works thereof, that is intentionally
+      submitted to Licensor for inclusion in the Work by the copyright owner
+      or by an individual or Legal Entity authorized to submit on behalf of
+      the copyright owner. For the purposes of this definition, "submitted"
+      means any form of electronic, verbal, or written communication sent
+      to the Licensor or its representatives, including but not limited to
+      communication on electronic mailing lists, source code control systems,
+      and issue tracking systems that are managed by, or on behalf of, the
+      Licensor for the purpose of discussing and improving the Work, but
+      excluding communication that is conspicuously marked or otherwise
+      designated in writing by the copyright owner as "Not a Contribution."
+
+      "Contributor" shall mean Licensor and any individual or Legal Entity
+      on behalf of whom a Contribution has been received by Licensor and
+      subsequently incorporated within the Work.
+
+   2. Grant of Copyright License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      copyright license to reproduce, prepare Derivative Works of,
+      publicly display, publicly perform, sublicense, and distribute the
+      Work and such Derivative Works in Source or Object form.
+
+   3. Grant of Patent License. Subject to the terms and conditions of
+      this License, each Contributor hereby grants to You a perpetual,
+      worldwide, non-exclusive, no-charge, royalty-free, irrevocable
+      (except as stated in this section) patent license to make, have made,
+      use, offer to sell, sell, import, and otherwise transfer the Work,
+      where such license applies only to those patent claims licensable
+      by such Contributor that are necessarily infringed by their
+      Contribution(s) alone or by combination of their Contribution(s)
+      with the Work to which such Contribution(s) was submitted. If You
+      institute patent litigation against any entity (including a
+      cross-claim or counterclaim in a lawsuit) alleging that the Work
+      or a Contribution incorporated within the Work constitutes direct
+      or contributory patent infringement, then any patent licenses
+      granted to You under this License for that Work shall terminate
+      as of the date such litigation is filed.
+
+   4. Redistribution. You may reproduce and distribute copies of the
+      Work or Derivative Works thereof in any medium, with or without
+      modifications, and in Source or Object form, provided that You
+      meet the following conditions:
+
+      (a) You must give any other recipients of the Work or
+          Derivative Works a copy of this License; and
+
+      (b) You must cause any modified files to carry prominent notices
+          stating that You changed the files; and
+
+      (c) You must retain, in the Source form of any Derivative Works
+          that You distribute, all copyright, patent, trademark, and
+          attribution notices from the Source form of the Work,
+          excluding those notices that do not pertain to any part of
+          the Derivative Works; and
+
+      (d) If the Work includes a "NOTICE" text file as part of its
+          distribution, then any Derivative Works that You distribute must
+          include a readable copy of the attribution notices contained
+          within such NOTICE file, excluding those notices that do not
+          pertain to any part of the Derivative Works, in at least one
+          of the following places: within a NOTICE text file distributed
+          as part of the Derivative Works; within the Source form or
+          documentation, if provided along with the Derivative Works; or,
+          within a display generated by the Derivative Works, if and
+          wherever such third-party notices normally appear. The contents
+          of the NOTICE file are for informational purposes only and
+          do not modify the License. You may add Your own attribution
+          notices within Derivative Works that You distribute, alongside
+          or as an addendum to the NOTICE text from the Work, provided
+          that such additional attribution notices cannot be construed
+          as modifying the License.
+
+      You may add Your own copyright statement to Your modifications and
+      may provide additional or different license terms and conditions
+      for use, reproduction, or distribution of Your modifications, or
+      for any such Derivative Works as a whole, provided Your use,
+      reproduction, and distribution of the Work otherwise complies with
+      the conditions stated in this License.
+
+   5. Submission of Contributions. Unless You explicitly state otherwise,
+      any Contribution intentionally submitted for inclusion in the Work
+      by You to the Licensor shall be under the terms and conditions of
+      this License, without any additional terms or conditions.
+      Notwithstanding the above, nothing herein shall supersede or modify
+      the terms of any separate license agreement you may have executed
+      with Licensor regarding such Contributions.
+
+   6. Trademarks. This License does not grant permission to use the trade
+      names, trademarks, service marks, or product names of the Licensor,
+      except as required for reasonable and customary use in describing the
+      origin of the Work and reproducing the content of the NOTICE file.
+
+   7. Disclaimer of Warranty. Unless required by applicable law or
+      agreed to in writing, Licensor provides the Work (and each
+      Contributor provides its Contributions) on an "AS IS" BASIS,
+      WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
+      implied, including, without limitation, any warranties or conditions
+      of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A
+      PARTICULAR PURPOSE. You are solely responsible for determining the
+      appropriateness of using or redistributing the Work and assume any
+      risks associated with Your exercise of permissions under this License.
+
+   8. Limitation of Liability. In no event and under no legal theory,
+      whether in tort (including negligence), contract, or otherwise,
+      unless required by applicable law (such as deliberate and grossly
+      negligent acts) or agreed to in writing, shall any Contributor be
+      liable to You for damages, including any direct, indirect, special,
+      incidental, or consequential damages of any character arising as a
+      result of this License or out of the use or inability to use the
+      Work (including but not limited to damages for loss of goodwill,
+      work stoppage, computer failure or malfunction, or any and all
+      other commercial damages or losses), even if such Contributor
+      has been advised of the possibility of such damages.
+
+   9. Accepting Warranty or Additional Liability. While redistributing
+      the Work or Derivative Works thereof, You may choose to offer,
+      and charge a fee for, acceptance of support, warranty, indemnity,
+      or other liability obligations and/or rights consistent with this
+      License. However, in accepting such obligations, You may act only
+      on Your own behalf and on Your sole responsibility, not on behalf
+      of any other Contributor, and only if You agree to indemnify,
+      defend, and hold each Contributor harmless for any liability
+      incurred by, or claims asserted against, such Contributor by reason
+      of your accepting any such warranty or additional liability.
+
+   END OF TERMS AND CONDITIONS
+
+   APPENDIX: How to apply the Apache License to your work.
+
+      To apply the Apache License to your work, attach the following
+      boilerplate notice, with the fields enclosed by brackets "[]"
+      replaced with your own identifying information. (Don't include
+      the brackets!)  The text should be enclosed in the appropriate
+      comment syntax for the file format. We also recommend that a
+      file or class name and description of purpose be included on the
+      same "printed page" as the copyright notice for easier
+      identification within third-party archives.
+
+   Copyright [yyyy] [name of copyright owner]
+
+   Licensed under the Apache License, Version 2.0 (the "License");
+   you may not use this file except in compliance with the License.
+   You may obtain a copy of the License at
+
+       http://www.apache.org/licenses/LICENSE-2.0
+
+   Unless required by applicable law or agreed to in writing, software
+   distributed under the License is distributed on an "AS IS" BASIS,
+   WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+   See the License for the specific language governing permissions and
+   limitations under the License.

vim/.config/nvim/README.md

@@ -0,0 +1,4 @@
+# 💤 LazyVim
+
+A starter template for [LazyVim](https://github.com/LazyVim/LazyVim).
+Refer to the [documentation](https://lazyvim.github.io/installation) to get started.

vim/.config/nvim/init.lua

@@ -0,0 +1,2 @@
+-- bootstrap lazy.nvim, LazyVim and your plugins
+require("config.lazy")

vim/.config/nvim/lazy-lock.json

@@ -0,0 +1,63 @@
+{
+  "LazyVim": { "branch": "main", "commit": "fe72424e77cb9c953084bbcaaa0eb7fe8056dc70" },
+  "LuaSnip": { "branch": "master", "commit": "a7a4b4682c4b3e2ba82b82a4e6e5f5a0e79dec32" },
+  "SchemaStore.nvim": { "branch": "main", "commit": "88355559bb42cc8e4f6ca7b624dc4c3b654c5c08" },
+  "bufferline.nvim": { "branch": "main", "commit": "b15c6daf5a64426c69732b31a951f4e438cb6590" },
+  "catppuccin": { "branch": "main", "commit": "c0de3b46811fe1ce3912e2245a9dfbea6b41c300" },
+  "cmp-buffer": { "branch": "main", "commit": "3022dbc9166796b644a841a02de8dd1cc1d311fa" },
+  "cmp-nvim-lsp": { "branch": "main", "commit": "5af77f54de1b16c34b23cba810150689a3a90312" },
+  "cmp-path": { "branch": "main", "commit": "91ff86cd9c29299a64f968ebb45846c485725f23" },
+  "cmp_luasnip": { "branch": "master", "commit": "05a9ab28b53f71d1aece421ef32fee2cb857a843" },
+  "conform.nvim": { "branch": "master", "commit": "34b81e70da83e26c048290204de44268eb59814e" },
+  "crates.nvim": { "branch": "main", "commit": "ec2b04a380c9f3a8e6ca38c230e4990d71978143" },
+  "dashboard-nvim": { "branch": "master", "commit": "413442b12d85315fc626c44a0ce4929b213ef604" },
+  "dressing.nvim": { "branch": "master", "commit": "6f212262061a2120e42da0d1e87326e8a41c0478" },
+  "edgy.nvim": { "branch": "main", "commit": "0b35dc6da4cae6cc2f724bc610eadf955cd2319b" },
+  "flash.nvim": { "branch": "main", "commit": "48817af25f51c0590653bbc290866e4890fe1cbe" },
+  "friendly-snippets": { "branch": "main", "commit": "dcd4a586439a1c81357d5b9d26319ae218cc9479" },
+  "gitsigns.nvim": { "branch": "main", "commit": "2c2463dbd82eddd7dbab881c3a62cfbfbe3c67ae" },
+  "headlines.nvim": { "branch": "master", "commit": "618ef1b2502c565c82254ef7d5b04402194d9ce3" },
+  "indent-blankline.nvim": { "branch": "master", "commit": "821a7acd88587d966f7e464b0b3031dfe7f5680c" },
+  "lazy.nvim": { "branch": "main", "commit": "28126922c9b54e35a192ac415788f202c3944c9f" },
+  "lualine.nvim": { "branch": "master", "commit": "8b56462bfb746760465264de41b4907310f113ec" },
+  "markdown-preview.nvim": { "branch": "master", "commit": "a923f5fc5ba36a3b17e289dc35dc17f66d0548ee" },
+  "mason-lspconfig.nvim": { "branch": "main", "commit": "21d33d69a81f6351e5a5f49078b2e4f0075c8e73" },
+  "mason.nvim": { "branch": "main", "commit": "3b5068f0fc565f337d67a2d315d935f574848ee7" },
+  "mini.ai": { "branch": "main", "commit": "ee9446a17c160aba6a04ff22097389c41872c878" },
+  "mini.bufremove": { "branch": "main", "commit": "931a3bb514147d9e812767275c4beba6b779b1d3" },
+  "mini.comment": { "branch": "main", "commit": "a4b7e46deb9ad2feb8902cc5dbf087eced112ee5" },
+  "mini.indentscope": { "branch": "main", "commit": "cf07f19e718ebb0bcc5b00999083ce11c37b8d40" },
+  "mini.pairs": { "branch": "main", "commit": "04f58f2545ed80ac3b52dd4826e93f33e15b2af6" },
+  "mini.surround": { "branch": "main", "commit": "a1b590cc3b676512de507328d6bbab5e43794720" },
+  "neo-tree.nvim": { "branch": "v3.x", "commit": "459c60317cc1d251f6eb3b6f010d015d5d24b806" },
+  "neoconf.nvim": { "branch": "main", "commit": "8d7150e9d6113f01421c34c5aeb0f586afa232e0" },
+  "neodev.nvim": { "branch": "main", "commit": "84e0290f5600e8b89c0dfcafc864f45496a53400" },
+  "noice.nvim": { "branch": "main", "commit": "bf67d70bd7265d075191e7812d8eb42b9791f737" },
+  "nui.nvim": { "branch": "main", "commit": "fbb139c6f14896b434d0229099e1acd863ae6bec" },
+  "nvim-cmp": { "branch": "main", "commit": "04e0ca376d6abdbfc8b52180f8ea236cbfddf782" },
+  "nvim-lint": { "branch": "master", "commit": "e824adb9bc01647f71e55457353a68f0f37f9931" },
+  "nvim-lspconfig": { "branch": "master", "commit": "7f5cf1121f772850a30bdaf83fb448e88846aa58" },
+  "nvim-notify": { "branch": "master", "commit": "5371f4bfc1f6d3adf4fe9d62cd3a9d44356bfd15" },
+  "nvim-spectre": { "branch": "master", "commit": "3712ff0cdf4f9f877d9ca708d835a877d9a0abaf" },
+  "nvim-treesitter": { "branch": "master", "commit": "212b7a504cf56f85d1acc5be237261b42d7560c5" },
+  "nvim-treesitter-context": { "branch": "master", "commit": "53cdd58446521575d8f1052152099e08b15ca53c" },
+  "nvim-treesitter-textobjects": { "branch": "master", "commit": "3532f6095efd4723f7c066a5ac3fe632506cc09e" },
+  "nvim-ts-autotag": { "branch": "main", "commit": "531f48334c422222aebc888fd36e7d109cb354cd" },
+  "nvim-ts-context-commentstring": { "branch": "main", "commit": "7ab799a9792f7cf3883cf28c6a00ad431f3d382a" },
+  "nvim-web-devicons": { "branch": "master", "commit": "4adea17610d140a99c313e3f79a9dc01825d59ae" },
+  "onedark.vim": { "branch": "main", "commit": "57b77747694ea5676c3ca0eeaf9567dc499730c0" },
+  "orgmode": { "branch": "master", "commit": "779a56823857a2e0baacadc7f3042fa0bfbaf6aa" },
+  "persistence.nvim": { "branch": "main", "commit": "4982499c1636eac254b72923ab826ee7827b3084" },
+  "plenary.nvim": { "branch": "master", "commit": "4f71c0c4a196ceb656c824a70792f3df3ce6bb6d" },
+  "rust-tools.nvim": { "branch": "master", "commit": "676187908a1ce35ffcd727c654ed68d851299d3e" },
+  "telescope-fzf-native.nvim": { "branch": "main", "commit": "6c921ca12321edaa773e324ef64ea301a1d0da62" },
+  "telescope.nvim": { "branch": "master", "commit": "dc1ea28cc2a02cd1cebb9d80e967807d668f78f8" },
+  "todo-comments.nvim": { "branch": "main", "commit": "833d8dd8b07eeda37a09e99460f72a02616935cb" },
+  "tokyonight.nvim": { "branch": "main", "commit": "610179f7f12db3d08540b6cc61434db2eaecbcff" },
+  "trouble.nvim": { "branch": "main", "commit": "f1168feada93c0154ede4d1fe9183bf69bac54ea" },
+  "vim-illuminate": { "branch": "master", "commit": "305bf07b919ac526deb5193280379e2f8b599926" },
+  "vim-ledger": { "branch": "master", "commit": "281346a221434574dd7f8767a352b2bf0b218b74" },
+  "vim-startuptime": { "branch": "master", "commit": "308b0088a864c4711a96e45b6734cf9294074f65" },
+  "vimtex": { "branch": "master", "commit": "a77d14b2e4391c0d3e860708bb1fd56161ab68eb" },
+  "which-key.nvim": { "branch": "main", "commit": "4433e5ec9a507e5097571ed55c02ea9658fb268a" }
+}

vim/.config/nvim/lazyvim.json

@@ -0,0 +1,14 @@
+{
+  "extras": [
+    "lazyvim.plugins.extras.lang.docker",
+    "lazyvim.plugins.extras.lang.markdown",
+    "lazyvim.plugins.extras.lang.rust",
+    "lazyvim.plugins.extras.lang.tex",
+    "lazyvim.plugins.extras.lang.yaml",
+    "lazyvim.plugins.extras.ui.edgy"
+  ],
+  "news": {
+    "NEWS.md": "2123"
+  },
+  "version": 2
+}

vim/.config/nvim/lua/config/autocmds.lua

@@ -0,0 +1,3 @@
+-- Autocmds are automatically loaded on the VeryLazy event
+-- Default autocmds that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/autocmds.lua
+-- Add any additional autocmds here

vim/.config/nvim/lua/config/keymaps.lua

@@ -0,0 +1,3 @@
+-- Keymaps are automatically loaded on the VeryLazy event
+-- Default keymaps that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/keymaps.lua
+-- Add any additional keymaps here

vim/.config/nvim/lua/config/lazy.lua

@@ -0,0 +1,46 @@
+local lazypath = vim.fn.stdpath("data") .. "/lazy/lazy.nvim"
+if not vim.loop.fs_stat(lazypath) then
+  -- bootstrap lazy.nvim
+  -- stylua: ignore
+  vim.fn.system({ "git", "clone", "--filter=blob:none", "https://github.com/folke/lazy.nvim.git", "--branch=stable", lazypath })
+end
+vim.opt.rtp:prepend(vim.env.LAZY or lazypath)
+
+require("lazy").setup({
+  spec = {
+    -- add LazyVim and import its plugins
+    { "LazyVim/LazyVim", import = "lazyvim.plugins" },
+    -- import any extras modules here
+    -- { import = "lazyvim.plugins.extras.lang.typescript" },
+    -- { import = "lazyvim.plugins.extras.lang.json" },
+    -- { import = "lazyvim.plugins.extras.ui.mini-animate" },
+    -- import/override with your plugins
+    { import = "plugins" },
+  },
+  defaults = {
+    -- By default, only LazyVim plugins will be lazy-loaded. Your custom plugins will load during startup.
+    -- If you know what you're doing, you can set this to `true` to have all your custom plugins lazy-loaded by default.
+    lazy = false,
+    -- It's recommended to leave version=false for now, since a lot the plugin that support versioning,
+    -- have outdated releases, which may break your Neovim install.
+    version = false, -- always use the latest git commit
+    -- version = "*", -- try installing the latest stable version for plugins that support semver
+  },
+  install = { colorscheme = { "tokyonight", "habamax" } },
+  checker = { enabled = true }, -- automatically check for plugin updates
+  performance = {
+    rtp = {
+      -- disable some rtp plugins
+      disabled_plugins = {
+        "gzip",
+        -- "matchit",
+        -- "matchparen",
+        -- "netrwPlugin",
+        "tarPlugin",
+        "tohtml",
+        "tutor",
+        "zipPlugin",
+      },
+    },
+  },
+})

vim/.config/nvim/lua/config/options.lua

@@ -0,0 +1,3 @@
+-- Options are automatically loaded before lazy.nvim startup
+-- Default options that are always set: https://github.com/LazyVim/LazyVim/blob/main/lua/lazyvim/config/options.lua
+-- Add any additional options here

vim/.config/nvim/lua/plugins/example.lua

@@ -0,0 +1,265 @@
+-- since this is just an example spec, don't actually load anything here and return an empty spec
+-- stylua: ignore
+if true then return {} end
+
+-- every spec file under the "plugins" directory will be loaded automatically by lazy.nvim
+--
+-- In your plugin files, you can:
+-- * add extra plugins
+-- * disable/enabled LazyVim plugins
+-- * override the configuration of LazyVim plugins
+return {
+  -- add gruvbox
+  { "ellisonleao/gruvbox.nvim" },
+
+  -- Configure LazyVim to load gruvbox
+  {
+    "LazyVim/LazyVim",
+    opts = {
+      colorscheme = "gruvbox",
+    },
+  },
+
+  -- change trouble config
+  {
+    "folke/trouble.nvim",
+    -- opts will be merged with the parent spec
+    opts = { use_diagnostic_signs = true },
+  },
+
+  -- disable trouble
+  { "folke/trouble.nvim", enabled = false },
+
+  -- add symbols-outline
+  {
+    "simrat39/symbols-outline.nvim",
+    cmd = "SymbolsOutline",
+    keys = { { "<leader>cs", "<cmd>SymbolsOutline<cr>", desc = "Symbols Outline" } },
+    config = true,
+  },
+
+  -- override nvim-cmp and add cmp-emoji
+  {
+    "hrsh7th/nvim-cmp",
+    dependencies = { "hrsh7th/cmp-emoji" },
+    ---@param opts cmp.ConfigSchema
+    opts = function(_, opts)
+      table.insert(opts.sources, { name = "emoji" })
+    end,
+  },
+
+  -- change some telescope options and a keymap to browse plugin files
+  {
+    "nvim-telescope/telescope.nvim",
+    keys = {
+      -- add a keymap to browse plugin files
+      -- stylua: ignore
+      {
+        "<leader>fp",
+        function() require("telescope.builtin").find_files({ cwd = require("lazy.core.config").options.root }) end,
+        desc = "Find Plugin File",
+      },
+    },
+    -- change some options
+    opts = {
+      defaults = {
+        layout_strategy = "horizontal",
+        layout_config = { prompt_position = "top" },
+        sorting_strategy = "ascending",
+        winblend = 0,
+      },
+    },
+  },
+
+  -- add telescope-fzf-native
+  {
+    "telescope.nvim",
+    dependencies = {
+      "nvim-telescope/telescope-fzf-native.nvim",
+      build = "make",
+      config = function()
+        require("telescope").load_extension("fzf")
+      end,
+    },
+  },
+
+  -- add pyright to lspconfig
+  {
+    "neovim/nvim-lspconfig",
+    ---@class PluginLspOpts
+    opts = {
+      ---@type lspconfig.options
+      servers = {
+        -- pyright will be automatically installed with mason and loaded with lspconfig
+        pyright = {},
+      },
+    },
+  },
+
+  -- add tsserver and setup with typescript.nvim instead of lspconfig
+  {
+    "neovim/nvim-lspconfig",
+    dependencies = {
+      "jose-elias-alvarez/typescript.nvim",
+      init = function()
+        require("lazyvim.util").lsp.on_attach(function(_, buffer)
+          -- stylua: ignore
+          vim.keymap.set( "n", "<leader>co", "TypescriptOrganizeImports", { buffer = buffer, desc = "Organize Imports" })
+          vim.keymap.set("n", "<leader>cR", "TypescriptRenameFile", { desc = "Rename File", buffer = buffer })
+        end)
+      end,
+    },
+    ---@class PluginLspOpts
+    opts = {
+      ---@type lspconfig.options
+      servers = {
+        -- tsserver will be automatically installed with mason and loaded with lspconfig
+        tsserver = {},
+      },
+      -- you can do any additional lsp server setup here
+      -- return true if you don't want this server to be setup with lspconfig
+      ---@type table<string, fun(server:string, opts:_.lspconfig.options):boolean?>
+      setup = {
+        -- example to setup with typescript.nvim
+        tsserver = function(_, opts)
+          require("typescript").setup({ server = opts })
+          return true
+        end,
+        -- Specify * to use this function as a fallback for any server
+        -- ["*"] = function(server, opts) end,
+      },
+    },
+  },
+
+  -- for typescript, LazyVim also includes extra specs to properly setup lspconfig,
+  -- treesitter, mason and typescript.nvim. So instead of the above, you can use:
+  { import = "lazyvim.plugins.extras.lang.typescript" },
+
+  -- add more treesitter parsers
+  {
+    "nvim-treesitter/nvim-treesitter",
+    opts = {
+      ensure_installed = {
+        "bash",
+        "html",
+        "javascript",
+        "json",
+        "lua",
+        "markdown",
+        "markdown_inline",
+        "python",
+        "query",
+        "regex",
+        "tsx",
+        "typescript",
+        "vim",
+        "yaml",
+      },
+    },
+  },
+
+  -- since `vim.tbl_deep_extend`, can only merge tables and not lists, the code above
+  -- would overwrite `ensure_installed` with the new value.
+  -- If you'd rather extend the default config, use the code below instead:
+  {
+    "nvim-treesitter/nvim-treesitter",
+    opts = function(_, opts)
+      -- add tsx and treesitter
+      vim.list_extend(opts.ensure_installed, {
+        "tsx",
+        "typescript",
+      })
+    end,
+  },
+
+  -- the opts function can also be used to change the default opts:
+  {
+    "nvim-lualine/lualine.nvim",
+    event = "VeryLazy",
+    opts = function(_, opts)
+      table.insert(opts.sections.lualine_x, "😄")
+    end,
+  },
+
+  -- or you can return new options to override all the defaults
+  {
+    "nvim-lualine/lualine.nvim",
+    event = "VeryLazy",
+    opts = function()
+      return {
+        --[[add your custom lualine config here]]
+      }
+    end,
+  },
+
+  -- use mini.starter instead of alpha
+  { import = "lazyvim.plugins.extras.ui.mini-starter" },
+
+  -- add jsonls and schemastore packages, and setup treesitter for json, json5 and jsonc
+  { import = "lazyvim.plugins.extras.lang.json" },
+
+  -- add any tools you want to have installed below
+  {
+    "williamboman/mason.nvim",
+    opts = {
+      ensure_installed = {
+        "stylua",
+        "shellcheck",
+        "shfmt",
+        "flake8",
+      },
+    },
+  },
+
+  -- Use <tab> for completion and snippets (supertab)
+  -- first: disable default <tab> and <s-tab> behavior in LuaSnip
+  {
+    "L3MON4D3/LuaSnip",
+    keys = function()
+      return {}
+    end,
+  },
+  -- then: setup supertab in cmp
+  {
+    "hrsh7th/nvim-cmp",
+    dependencies = {
+      "hrsh7th/cmp-emoji",
+    },
+    ---@param opts cmp.ConfigSchema
+    opts = function(_, opts)
+      local has_words_before = function()
+        unpack = unpack or table.unpack
+        local line, col = unpack(vim.api.nvim_win_get_cursor(0))
+        return col ~= 0 and vim.api.nvim_buf_get_lines(0, line - 1, line, true)[1]:sub(col, col):match("%s") == nil
+      end
+
+      local luasnip = require("luasnip")
+      local cmp = require("cmp")
+
+      opts.mapping = vim.tbl_extend("force", opts.mapping, {
+        ["<Tab>"] = cmp.mapping(function(fallback)
+          if cmp.visible() then
+            cmp.select_next_item()
+            -- You could replace the expand_or_jumpable() calls with expand_or_locally_jumpable()
+            -- this way you will only jump inside the snippet region
+          elseif luasnip.expand_or_jumpable() then
+            luasnip.expand_or_jump()
+          elseif has_words_before() then
+            cmp.complete()
+          else
+            fallback()
+          end
+        end, { "i", "s" }),
+        ["<S-Tab>"] = cmp.mapping(function(fallback)
+          if cmp.visible() then
+            cmp.select_prev_item()
+          elseif luasnip.jumpable(-1) then
+            luasnip.jump(-1)
+          else
+            fallback()
+          end
+        end, { "i", "s" }),
+      })
+    end,
+  },
+}

vim/.config/nvim/lua/plugins/ledger-cli.lua

@@ -0,0 +1,4 @@
+return {
+  -- Add vim-ledger
+  { "ledger/vim-ledger" },
+}

vim/.config/nvim/lua/plugins/onedark.lua

@@ -0,0 +1,9 @@
+return {
+  { "joshdick/onedark.vim" },
+  {
+    "LazyVim/LazyVim",
+    opts = {
+      colorscheme = "onedark",
+    },
+  },
+}

vim/.config/nvim/lua/plugins/org-mode.lua

@@ -0,0 +1,27 @@
+return {
+  {
+    "nvim-orgmode/orgmode",
+    dependencies = {
+      { "nvim-treesitter/nvim-treesitter", lazy = true },
+    },
+    event = "VeryLazy",
+    config = function()
+      -- Load treesitter grammar for org
+      require("orgmode").setup_ts_grammar()
+
+      -- Setup treesitter
+      require("nvim-treesitter.configs").setup({
+        highlight = {
+          enable = true,
+        },
+        ensure_installed = { "org" },
+      })
+
+      -- Setup orgmode
+      require("orgmode").setup({
+        org_agenda_files = "~/orgfiles/**/*",
+        org_default_notes_file = "~/orgfiles/refile.org",
+      })
+    end,
+  },
+}

vim/.config/nvim/stylua.toml

@@ -0,0 +1,3 @@
+indent_type = "Spaces"
+indent_width = 2
+column_width = 120

zsh/.zshrc

@@ -6,8 +6,8 @@ export PenTestTools=$HOME/Local/PenTesting/
 export CTF=$HOME/Documents/CTF/
 export WORKSPACE=$HOME/workspace_l
 export ZSHRC="$HOME/.zshrc"
-export VISUAL="emacsclient -t"
+export VISUAL="nvim"
-export EDITOR="emacsclient -t"
+export EDITOR="nvim"
 
 
 # History