tudattr/dotfiles
1
0
Fork 0
Code Issues Pull Requests 1 Packages Projects Releases Wiki Activity

Added .gitconfig

Browse Source 
Signed-off-by: Tuan-Dat Tran <tuan-dat.tran@tudattr.dev>
This commit is contained in:
Tuan-Dat Tran
2024-03-15 16:02:52 +01:00
parent 34cda631d2
commit 6c023972ef
57 changed files with 58 additions and 13099 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
config/.config/alacritty/alacritty.toml
View File

@@ -11,7 +11,7 @@ style = "Bold Italic"
style = "Italic"
[font.normal]
family = "DejaVu Sans Mono for Powerline"
family = "DejaVuSansM Nerd Font Mono"
style = "Regular"
[window]

149
config/.config/cava/config
View File

@@ -1,149 +0,0 @@
## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
[general]
# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
; mode = normal
# Accepts only non-negative values.
; framerate = 60
# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
# new as of 0.6.0 autosens of low values (dynamic range)
# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
; autosens = 1
; overshoot = 20
# Manual sensitivity in %. Autosens must be turned off for this to take effect.
# 200 means double height. Accepts only non-negative values.
; sensitivity = 100
# The number of bars (0-200). 0 sets it to auto (fill up console).
# Bars' width and space between bars in number of characters.
; bars = 0
; bar_width = 2
; bar_spacing = 1
# Lower and higher cutoff frequencies for lowest and highest bars
# the bandwidth of the visualizer.
# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
# Cava will automatically increase the higher cutoff if a too low band is specified.
; lower_cutoff_freq = 50
; higher_cutoff_freq = 10000
[input]
# Audio capturing method. Possible methods are: 'pulse', 'alsa' or 'fifo'.
# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
#
# All input methods uses the same config variable 'source'
# to define where it should get the audio.
#
# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
#
# For alsa 'source' will be the capture device.
# For fifo 'source' will be the path to fifo-file.
method = pulse
; source = auto
; method = alsa
; source = hw:Loopback,1
; method = fifo
; source = /tmp/mpd.fifo
[output]
# Ouput method. Can be 'ncurses', 'noncurses' or 'raw'.
# 'noncurses' is for systems that does not suport ncurses.
# 'raw' is a 16 bit data stream of the bar heights that can be used to send to other applications.
# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
; method = ncurses
# Visual channels. Can be 'stereo' or 'mono'.
# 'stereo' mirrors both channels with low frequencies in center.
# 'mono' averages both channels and outputs left to right lowest to highest frequencies.
; channels = stereo
# Raw output target. A fifo will be created if target does not exist.
; raw_target = /dev/stdout
# Raw data format. Can be 'binary' or 'ascii'.
; data_format = binary
# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
; bit_format = 16bit
# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
; ascii_max_range = 1000
# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
; bar_delimiter = 59
; frame_delimiter = 10
[color]
# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires a
# terminal that can change color definitions such as Gnome-terminal or rxvt.
; background = black
; foreground = blue
# Gradient mode, only hex defined colors are supported, background must also be defined in hex
# or remain commented out. 1 = on, 0 = off. Warning: for certain terminal emulators cava will
# not able to restore color definitions on exit, simply restart your terminal to restore colors.
gradient = 1
# GMK Noel
gradient_color_1 = '#FFFFFF'
gradient_color_2 = '#EEB9C1'
gradient_color_3 = '#B3DCE1'
gradient_color_4 = '#66B9D2'
# Cool Blues
; gradient_color_1 = '#2193b0'
; gradient_color_2 = '#6dd5ed'
# Quepal
; gradient_color_1 = '#11998e'
; gradient_color_2 = '#38ef7d'
# Teal Love
; gradient_color_1 = '#11FFBD'
; gradient_color_2 = '#AAFFA9'
[smoothing]
# Percentage value for integral smoothing. Takes values from 0 - 100.
# Higher values means smoother, but less precise. 0 to disable.
; integral = 70
# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
; monstercat = 1
; waves = 0;
# Set gravity percentage for "drop off". Higher values means bars will drop faster.
# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
; gravity = 100
# In bar height, bars that would have been lower that this will not be drawn.
; ignore = 0
[eq]
# This one is tricky. You can have as much keys as you want.
# Remember to uncomment more then one key! More keys = more precision.
# Look at readme.md on github for further explanations and examples.
; 1 = 1 # bass
; 2 = 1
; 3 = 1 # midtone
; 4 = 1
; 5 = 1 # treble

79
config/.config/cava/shaders/bar_spectrum.frag
View File

@@ -1,79 +0,0 @@
#version 330
in vec2 fragCoord;
out vec4 fragColor;
// bar values. defaults to left channels first (low to high), then right (high to low).
uniform float bars[512];
uniform int bars_count; // number of bars (left + right) (configurable)
uniform int bar_width; // bar width (configurable), not used here
uniform int bar_spacing; // space bewteen bars (configurable)
uniform vec3 u_resolution; // window resolution
//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
uniform vec3 bg_color; // background color
uniform vec3 fg_color; // foreground color
uniform int gradient_count;
uniform vec3 gradient_colors[8]; // gradient colors
vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
{
//create color based on fraction of this color and next color
float yr = (y - y_min) / (y_max - y_min);
return col_1 * (1.0 - yr) + col_2 * yr;
}
void main()
{
// find which bar to use based on where we are on the x axis
float x = u_resolution.x * fragCoord.x;
int bar = int(bars_count * fragCoord.x);
//calculate a bar size
float bar_size = u_resolution.x / bars_count;
//the y coordinate and bar values are the same
float y = bars[bar];
// make sure there is a thin line at bottom
if (y * u_resolution.y < 1.0)
{
y = 1.0 / u_resolution.y;
}
//draw the bar up to current height
if (y > fragCoord.y)
{
//make some space between bars basen on settings
if (x > (bar + 1) * (bar_size) - bar_spacing)
{
fragColor = vec4(bg_color,1.0);
}
else
{
if (gradient_count == 0)
{
fragColor = vec4(fg_color,1.0);
}
else
{
//find which color in the configured gradient we are at
int color = int((gradient_count - 1) * fragCoord.y);
//find where on y this and next color is supposed to be
float y_min = color / (gradient_count - 1.0);
float y_max = (color + 1.0) / (gradient_count - 1.0);
//make color
fragColor = vec4(normalize_C(fragCoord.y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
}
}
}
else
{
fragColor = vec4(bg_color,1.0);
}
}

34
config/.config/cava/shaders/northern_lights.frag
View File

@@ -1,34 +0,0 @@
#version 330
in vec2 fragCoord;
out vec4 fragColor;
// bar values. defaults to left channels first (low to high), then right (high to low).
uniform float bars[512];
uniform int bars_count; // number of bars (left + right) (configurable)
uniform vec3 u_resolution; // window resolution, not used here
//colors, configurable in cava config file
uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
uniform vec3 fg_color; // foreground color, not used here
void main()
{
// find which bar to use based on where we are on the x axis
int bar = int(bars_count * fragCoord.x);
float bar_y = 1.0 - abs((fragCoord.y - 0.5)) * 2.0;
float y = (bars[bar]) * bar_y;
float bar_x = (fragCoord.x - float(bar) / float(bars_count)) * bars_count;
float bar_r = 1.0 - abs((bar_x - 0.5)) * 2;
bar_r = bar_r * bar_r * 2;
// set color
fragColor.r = fg_color.x * y * bar_r;
fragColor.g = fg_color.y * y * bar_r;
fragColor.b = fg_color.z * y * bar_r;
}

14
config/.config/cava/shaders/pass_through.vert
View File

@@ -1,14 +0,0 @@
#version 330
// Input vertex data, different for all executions of this shader.
layout(location = 0) in vec3 vertexPosition_modelspace;
// Output data ; will be interpolated for each fragment.
out vec2 fragCoord;
void main()
{
gl_Position = vec4(vertexPosition_modelspace,1);
fragCoord = (vertexPosition_modelspace.xy+vec2(1,1))/2.0;
}

13
config/.config/i3/config
View File

@@ -86,17 +86,14 @@ for_window [title="KeePassX$"] floating enable border normal
############################ Startup Applications #############################
###############################################################################
# exec --no-startup-id setxkbmap us,de; setxkbmap -option ctrl:nocaps; setxkbmap -option grp:lalt_lshift_toggle
exec --no-startup-id setxkbmap eu; setxkbmap -option ctrl:nocaps;
exec --no-startup-id picom
exec --no-startup-id udiskie
exec --no-startup-id conky -c ~/.conky/syclo-crimson-bottomleft.conkyrc
# exec --no-startup-id synergyc -f --no-tray --debug INFO --name genesis --enable-crypto 192.168.178.38:24800
exec --no-startup-id dunst
exec --no-startup-id ~/.scripts/startup.sh
exec --no-startup-id llk
exec --no-startup-id emacs --daemon
exec --no-startup-id syncthing
exec --no-startup-id xrandr --output eDP1 --auto --left-of HDMI1 --output HDMI1 --off --output DP1 --off; feh --randomize --bg-fill /home/tuan/Pictures/Wallpaper/*
exec --no-startup-id feh --randomize --bg-fill $HOME/Pictures/Wallpaper/*
###############################################################################
@@ -110,13 +107,13 @@ bindsym $mod+Shift+s exec poweroff
# start a terminal
bindsym $mod+space exec alacritty
bindsym $mod+Return exec alacritty -e nu /home/tuan/.scripts/zellij-chooser.nu
bindsym $mod+Return exec alacritty -e zellij
# kill focused window
bindsym $mod+Shift+q kill
# start program launcher
bindsym $mod+d exec --no-startup-id /home/tuan/.config/rofi/launchers/type-1/launcher.sh
bindsym $mod+d exec --no-startup-id $HOME/.config/rofi/launchers/type-1/launcher.sh
# Screen brightness controls
bindsym XF86MonBrightnessUp exec --no-startup-id ~/.scripts/screen.sh up
@@ -133,9 +130,7 @@ bindsym XF86AudioPrevious exec "playerctl previous"
# Application Shortcuts
bindsym $mod+b exec firefox
bindsym $mod+p exec firefox --private-window https://mos4.de
bindsym $mod+e exec emacsclient -c
bindsym $mod+m exec thunderbird
bindsym $mod+p exec firefox --private-window https://tudattr.dev
# Whole Screen
bindsym Control+Print exec --no-startup-id ~/.scripts/screenshot.sh screen

556
config/.config/nushell/config.nu
View File

@@ -1,556 +0,0 @@
# Nushell Config File
# For more information on defining custom themes, see
# https://www.nushell.sh/book/coloring_and_theming.html
# And here is the theme collection
# https://github.com/nushell/nu_scripts/tree/main/themes
let dark_theme = {
# color for nushell primitives
separator: white
leading_trailing_space_bg: { attr: n } # no fg, no bg, attr none effectively turns this off
header: green_bold
empty: blue
# Closures can be used to choose colors for specific values.
# The value (in this case, a bool) is piped into the closure.
bool: { || if $in { 'light_cyan' } else { 'light_gray' } }
int: white
filesize: {|e|
if $e == 0b {
'white'
} else if $e < 1mb {
'cyan'
} else { 'blue' }
}
duration: white
date: { || (date now) - $in |
if $in < 1hr {
'red3b'
} else if $in < 6hr {
'orange3'
} else if $in < 1day {
'yellow3b'
} else if $in < 3day {
'chartreuse2b'
} else if $in < 1wk {
'green3b'
} else if $in < 6wk {
'darkturquoise'
} else if $in < 52wk {
'deepskyblue3b'
} else { 'dark_gray' }
}
range: white
float: white
string: white
nothing: white
binary: white
cellpath: white
row_index: green_bold
record: white
list: white
block: white
hints: dark_gray
shape_and: purple_bold
shape_binary: purple_bold
shape_block: blue_bold
shape_bool: light_cyan
shape_custom: green
shape_datetime: cyan_bold
shape_directory: cyan
shape_external: cyan
shape_externalarg: green_bold
shape_filepath: cyan
shape_flag: blue_bold
shape_float: purple_bold
# shapes are used to change the cli syntax highlighting
shape_garbage: { fg: "#FFFFFF" bg: "#FF0000" attr: b}
shape_globpattern: cyan_bold
shape_int: purple_bold
shape_internalcall: cyan_bold
shape_list: cyan_bold
shape_literal: blue
shape_matching_brackets: { attr: u }
shape_nothing: light_cyan
shape_operator: yellow
shape_or: purple_bold
shape_pipe: purple_bold
shape_range: yellow_bold
shape_record: cyan_bold
shape_redirection: purple_bold
shape_signature: green_bold
shape_string: green
shape_string_interpolation: cyan_bold
shape_table: blue_bold
shape_variable: purple
}
let light_theme = {
# color for nushell primitives
separator: dark_gray
leading_trailing_space_bg: { attr: n } # no fg, no bg, attr none effectively turns this off
header: green_bold
empty: blue
# Closures can be used to choose colors for specific values.
# The value (in this case, a bool) is piped into the closure.
bool: { || if $in { 'dark_cyan' } else { 'dark_gray' } }
int: dark_gray
filesize: {|e|
if $e == 0b {
'dark_gray'
} else if $e < 1mb {
'cyan_bold'
} else { 'blue_bold' }
}
duration: dark_gray
date: { || (date now) - $in |
if $in < 1hr {
'red3b'
} else if $in < 6hr {
'orange3'
} else if $in < 1day {
'yellow3b'
} else if $in < 3day {
'chartreuse2b'
} else if $in < 1wk {
'green3b'
} else if $in < 6wk {
'darkturquoise'
} else if $in < 52wk {
'deepskyblue3b'
} else { 'dark_gray' }
}
range: dark_gray
float: dark_gray
string: dark_gray
nothing: dark_gray
binary: dark_gray
cellpath: dark_gray
row_index: green_bold
record: white
list: white
block: white
hints: dark_gray
shape_and: purple_bold
shape_binary: purple_bold
shape_block: blue_bold
shape_bool: light_cyan
shape_custom: green
shape_datetime: cyan_bold
shape_directory: cyan
shape_external: cyan
shape_externalarg: green_bold
shape_filepath: cyan
shape_flag: blue_bold
shape_float: purple_bold
# shapes are used to change the cli syntax highlighting
shape_garbage: { fg: "#FFFFFF" bg: "#FF0000" attr: b}
shape_globpattern: cyan_bold
shape_int: purple_bold
shape_internalcall: cyan_bold
shape_list: cyan_bold
shape_literal: blue
shape_matching_brackets: { attr: u }
shape_nothing: light_cyan
shape_operator: yellow
shape_or: purple_bold
shape_pipe: purple_bold
shape_range: yellow_bold
shape_record: cyan_bold
shape_redirection: purple_bold
shape_signature: green_bold
shape_string: green
shape_string_interpolation: cyan_bold
shape_table: blue_bold
shape_variable: purple
}
# External completer example
# let carapace_completer = {|spans|
# carapace $spans.0 nushell $spans | from json
# }
# The default config record. This is where much of your global configuration is setup.
let-env config = {
ls: {
use_ls_colors: true # use the LS_COLORS environment variable to colorize output
clickable_links: true # enable or disable clickable links. Your terminal has to support links.
}
rm: {
always_trash: false # always act as if -t was given. Can be overridden with -p
}
cd: {
abbreviations: false # allows `cd s/o/f` to expand to `cd some/other/folder`
}
table: {
mode: rounded # basic, compact, compact_double, light, thin, with_love, rounded, reinforced, heavy, none, other
trim: {
methodology: wrapping # wrapping or truncating
wrapping_try_keep_words: true # A strategy used by the 'wrapping' methodology
truncating_suffix: "..." # A suffix used by the 'truncating' methodology
}
}
explore: {
help_banner: true
exit_esc: true
command_bar_text: '#C4C9C6'
# command_bar: {fg: '#C4C9C6' bg: '#223311' }
status_bar_background: {fg: '#1D1F21' bg: '#C4C9C6' }
# status_bar_text: {fg: '#C4C9C6' bg: '#223311' }
highlight: {bg: 'yellow' fg: 'black' }
status: {
# warn: {bg: 'yellow', fg: 'blue'}
# error: {bg: 'yellow', fg: 'blue'}
# info: {bg: 'yellow', fg: 'blue'}
}
try: {
# border_color: 'red'
# highlighted_color: 'blue'
# reactive: false
}
table: {
split_line: '#404040'
cursor: true
line_index: true
line_shift: true
line_head_top: true
line_head_bottom: true
show_head: true
show_index: true
# selected_cell: {fg: 'white', bg: '#777777'}
# selected_row: {fg: 'yellow', bg: '#C1C2A3'}
# selected_column: blue
# padding_column_right: 2
# padding_column_left: 2
# padding_index_left: 2
# padding_index_right: 1
}
config: {
cursor_color: {bg: 'yellow' fg: 'black' }
# border_color: white
# list_color: green
}
}
history: {
max_size: 10000 # Session has to be reloaded for this to take effect
sync_on_enter: true # Enable to share history between multiple sessions, else you have to close the session to write history to file
file_format: "plaintext" # "sqlite" or "plaintext"
}
completions: {
case_sensitive: false # set to true to enable case-sensitive completions
quick: true # set this to false to prevent auto-selecting completions when only one remains
partial: true # set this to false to prevent partial filling of the prompt
algorithm: "prefix" # prefix or fuzzy
external: {
enable: true # set to false to prevent nushell looking into $env.PATH to find more suggestions, `false` recommended for WSL users as this look up my be very slow
max_results: 100 # setting it lower can improve completion performance at the cost of omitting some options
completer: null # check 'carapace_completer' above as an example
}
}
filesize: {
metric: true # true => KB, MB, GB (ISO standard), false => KiB, MiB, GiB (Windows standard)
format: "auto" # b, kb, kib, mb, mib, gb, gib, tb, tib, pb, pib, eb, eib, zb, zib, auto
}
color_config: $dark_theme # if you want a light theme, replace `$dark_theme` to `$light_theme`
use_grid_icons: true
footer_mode: "25" # always, never, number_of_rows, auto
float_precision: 2 # the precision for displaying floats in tables
# buffer_editor: "emacs" # command that will be used to edit the current line buffer with ctrl+o, if unset fallback to $env.EDITOR and $env.VISUAL
use_ansi_coloring: true
edit_mode: emacs # emacs, vi
shell_integration: true # enables terminal markers and a workaround to arrow keys stop working issue
# true or false to enable or disable the welcome banner at startup
show_banner: false
render_right_prompt_on_last_line: false # true or false to enable or disable right prompt to be rendered on last line of the prompt.
#hooks: {
# pre_prompt: [{ ||
# null # replace with source code to run before the prompt is shown
# }]
# pre_execution: [{ ||
# null # replace with source code to run before the repl input is run
# }]
# env_change: { ||
# PWD: [{|before, after|
# null # replace with source code to run if the PWD environment is different since the last repl input
# }]
# }
# display_output: { ||
# if (term size).columns >= 100 { table -e } else { table }
# }
#}
menus: [
# Configuration for default nushell menus
# Note the lack of source parameter
{
name: completion_menu
only_buffer_difference: false
marker: "| "
type: {
layout: columnar
columns: 4
col_width: 20 # Optional value. If missing all the screen width is used to calculate column width
col_padding: 2
}
style: {
text: green
selected_text: green_reverse
description_text: yellow
}
}
{
name: history_menu
only_buffer_difference: true
marker: "? "
type: {
layout: list
page_size: 10
}
style: {
text: green
selected_text: green_reverse
description_text: yellow
}
}
{
name: help_menu
only_buffer_difference: true
marker: "? "
type: {
layout: description
columns: 4
col_width: 20 # Optional value. If missing all the screen width is used to calculate column width
col_padding: 2
selection_rows: 4
description_rows: 10
}
style: {
text: green
selected_text: green_reverse
description_text: yellow
}
}
# Example of extra menus created using a nushell source
# Use the source field to create a list of records that populates
# the menu
{
name: commands_menu
only_buffer_difference: false
marker: "# "
type: {
layout: columnar
columns: 4
col_width: 20
col_padding: 2
}
style: {
text: green
selected_text: green_reverse
description_text: yellow
}
source: { |buffer, position|
$nu.scope.commands
| where name =~ $buffer
| each { |it| {value: $it.name description: $it.usage} }
}
}
{
name: vars_menu
only_buffer_difference: true
marker: "# "
type: {
layout: list
page_size: 10
}
style: {
text: green
selected_text: green_reverse
description_text: yellow
}
source: { |buffer, position|
$nu.scope.vars
| where name =~ $buffer
| sort-by name
| each { |it| {value: $it.name description: $it.type} }
}
}
{
name: commands_with_description
only_buffer_difference: true
marker: "# "
type: {
layout: description
columns: 4
col_width: 20
col_padding: 2
selection_rows: 4
description_rows: 10
}
style: {
text: green
selected_text: green_reverse
description_text: yellow
}
source: { |buffer, position|
$nu.scope.commands
| where name =~ $buffer
| each { |it| {value: $it.name description: $it.usage} }
}
}
]
keybindings: [
{
name: completion_menu
modifier: none
keycode: tab
mode: [emacs vi_normal vi_insert]
event: {
until: [
{ send: menu name: completion_menu }
{ send: menunext }
]
}
}
{
name: completion_previous
modifier: shift
keycode: backtab
mode: [emacs, vi_normal, vi_insert] # Note: You can add the same keybinding to all modes by using a list
event: { send: menuprevious }
}
{
name: history_menu
modifier: control
keycode: char_r
mode: emacs
event: { send: menu name: history_menu }
}
{
name: next_page
modifier: control
keycode: char_x
mode: emacs
event: { send: menupagenext }
}
{
name: undo_or_previous_page
modifier: control
keycode: char_z
mode: emacs
event: {
until: [
{ send: menupageprevious }
{ edit: undo }
]
}
}
{
name: yank
modifier: control
keycode: char_y
mode: emacs
event: {
until: [
{edit: pastecutbufferafter}
]
}
}
{
name: unix-line-discard
modifier: control
keycode: char_u
mode: [emacs, vi_normal, vi_insert]
event: {
until: [
{edit: cutfromlinestart}
]
}
}
{
name: kill-line
modifier: control
keycode: char_k
mode: [emacs, vi_normal, vi_insert]
event: {
until: [
{edit: cuttolineend}
]
}
}
# Keybindings used to trigger the user defined menus
{
name: commands_menu
modifier: control
keycode: char_t
mode: [emacs, vi_normal, vi_insert]
event: { send: menu name: commands_menu }
}
{
name: vars_menu
modifier: alt
keycode: char_o
mode: [emacs, vi_normal, vi_insert]
event: { send: menu name: vars_menu }
}
{
name: commands_with_description
modifier: control
keycode: char_s
mode: [emacs, vi_normal, vi_insert]
event: { send: menu name: commands_with_description }
}
]
}
def add_soft [project] { git remote add soft $"ssh://git.aya00:/($project)" }
alias ll = ls -la
alias la = ls -a
alias q = exit
alias e = emacsclient -t
alias ekill = (pkill emacs;pkill emacsclient;emacs --daemon)
alias picotik = picocom --b 115199 /dev/ttyUSB0
alias nmap = ^nmap -T5 --min-parallelism 100 -Pn
alias ed = emacs --daemon
alias eledger = emacsclient -nw ~/Documents/Finanzen/Ledger/MyBudget.ledger
alias sshconfig = emacsclient -nw ~/.ssh/config
alias econfig = emacsclient -nw ~/.doom.d/init.el
alias wttr = curl wttr.in/Essen
alias tvres = xrandr --output HDMI1 --transform 1.02,0,-20,0,1.02,-10,0,0,1
alias defaultres = xrandr --output HDMI1 --transform 1.00,0,0,0,1.00,0,0,0,1
alias latexmk = ^latexmk -f -pdf -interaction=nonstopmode
# git
alias gpa = git push all --all
alias gras = add_soft
alias gd = git diff
alias gp = git push
alias gcsm = git commit -s -m
alias gaa = git add --all
alias gco = git checkout
alias grv = git remote -v
let-env DOCKER_BUILDKIT = 1 # Disable for podman
source ~/.cache/starship/init.nu

70
config/.config/nushell/env.nu
View File

@@ -1,70 +0,0 @@
# Nushell Environment Config File
def create_left_prompt [] {
let home = ($env | get -i (if $nu.os-info.name == "windows" { "USERPROFILE" } else { "HOME" }) | into string)
let dir = ([
($env.PWD | str substring 0..($home | str length) | str replace -s $home "~"),
($env.PWD | str substring ($home | str length)..)
] | str join)
let path_segment = if (is-admin) {
$"(ansi red_bold)($dir)"
} else {
$"(ansi green_bold)($dir)"
}
$path_segment
}
def create_right_prompt [] {
let time_segment = ([
(date now | date format '%m/%d/%Y %r')
] | str join)
$time_segment
}
# Use nushell functions to define your right and left prompt
let-env PROMPT_COMMAND = { || create_left_prompt }
let-env PROMPT_COMMAND_RIGHT = {|| create_right_prompt }
# The prompt indicators are environmental variables that represent
# the state of the prompt
let-env PROMPT_INDICATOR = { || "〉" }
let-env PROMPT_INDICATOR_VI_INSERT = { || ": " }
let-env PROMPT_INDICATOR_VI_NORMAL = { || "〉" }
let-env PROMPT_MULTILINE_INDICATOR = { || "::: " }
# Specifies how environment variables are:
# - converted from a string to a value on Nushell startup (from_string)
# - converted from a value back to a string when running external commands (to_string)
# Note: The conversions happen *after* config.nu is loaded
let-env ENV_CONVERSIONS = {
"PATH": {
from_string: { |s| $s | split row (char esep) | path expand -n }
to_string: { |v| $v | path expand -n | str join (char esep) }
}
"Path": {
from_string: { |s| $s | split row (char esep) | path expand -n }
to_string: { |v| $v | path expand -n | str join (char esep) }
}
}
# Directories to search for scripts when calling source or use
#
# By default, <nushell-config-dir>/scripts is added
let-env NU_LIB_DIRS = [
($nu.config-path | path dirname | path join 'scripts')
]
# Directories to search for plugin binaries when calling register
#
# By default, <nushell-config-dir>/plugins is added
let-env NU_PLUGIN_DIRS = [
($nu.config-path | path dirname | path join 'plugins')
]
# To add entries to PATH (on Windows you might use Path), you can use the following pattern:
# let-env PATH = ($env.PATH | split row (char esep) | prepend '/some/path')
let-env VISUAL = 'emacsclient -t'
let-env EDITOR = 'emacsclient -t'

392
config/.config/polybar/config
View File

@@ -1,392 +0,0 @@
[colors]
background = ${xrdb:color0:#22300}
background-alt = ${xrdb:color8:#fa400}
foreground = ${xrdb:color7:#cdd}
foreground-alt = ${xrdb:color15:#eef}
black = ${xrdb:color0:#233}
red = ${xrdb:color1:#f90}
green = ${xrdb:color2:#8c4}
yellow = ${xrdb:color3:#fc0}
blue = ${xrdb:color4:#0af}
magenta = ${xrdb:color5:#e16}
cyan = ${xrdb:color6:#098}
white = ${xrdb:color7:#cdd}
[bar/systray]
width = 100%
height = 25
radius = 6.0
fixed-center = true
tray-position = right
tray-padding = 0
background = #00000000
foreground = ${colors.foreground}
module-margin-left = 1
module-margin-right = 1
font-0 = DejaVu Sans Mono for Powerline:pixelsize=10;1
# font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
# font-2 = siji:pixelsize=10;1
# font-3 = FontAwesome:style=Regular:pixelsize=10
modules-left =
modules-center = i3
modules-right =
cursor-click = pointer
cursor-scroll = ns-resize
[bar/beep]
width = 100%
height = 25
radius = 6.0
fixed-center = true
tray-position = right
tray-padding = 2
background = #00000000
foreground = ${colors.foreground}
module-margin-left = 1
module-margin-right = 1
font-0 = fixed:pixelsize=10;1
font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
font-2 = siji:pixelsize=10;1
font-3 = FontAwesome:style=Regular:pixelsize=10
modules-left = volume xkeyboard
modules-center = date
modules-right =
cursor-click = pointer
cursor-scroll = ns-resize
[bar/boop]
width = 100%
height = 2%
bottom = true
radius = 6.0
fixed-center = true
background = #00000000
foreground = ${colors.foreground}
line-size = 0
line-color = ${colors.blue}
border-size = 0
border-color = #00000000
padding-left = 0
padding-right = 2
module-margin-left = 1
module-margin-right = 2
font-0 = fixed:pixelsize=10;1
font-1 = unifont:fontformat=truetype:size=8:antialias=false;0
font-2 = siji:pixelsize=10;1
font-3 = FontAwesome:style=Regular:pixelsize=10
modules-left = airvpn
modules-center = i3
modules-right = xbacklight wlan eth battery1 powermenu
cursor-click = pointer
cursor-scroll = ns-resize
[module/xkeyboard]
type = internal/xkeyboard
blacklist-0 = num lock
format-prefix = " "
format-prefix-foreground = ${colors.foreground-alt}
format-prefix-underline = ${colors.magenta}
label-layout = %layout%
label-layout-underline = ${colors.magenta}
label-indicator-padding = 2
label-indicator-margin = 1
label-indicator-background = ${colors.magenta}
label-indicator-underline = ${colors.magenta}
[module/spotify]
type = custom/script
exec-if = pgrep -x spotify
exec = echo "$(playerctl metadata xesam:artist) - $(playerctl metadata xesam:title)"
[module/spotify-prev]
type = custom/script
exec-if = pgrep -x spotify
exec = echo ""
click-left = bash -c "playerctl previous"
[module/spotify-next]
type = custom/script
exec-if = pgrep -x spotify
exec = echo ""
click-left = bash -c "playerctl next"
[module/spotify-play]
type = custom/script
exec-if = pgrep -x spotify
exec = ~/.scripts/spotify-play.out
tail = true
click-left = bash -c "if [ `cat /home/$USER/.scripts/playstate` = 0 ]; then echo '1'>/home/$USER/.scripts/playstate;else echo '0'>/home/$USER/.scripts/playstate;fi"
[module/spotify-stop]
type = custom/script
exec-if = pgrep -x spotify
exec = echo ""
tail = true
click-left = bash -c "playerctl stop && echo '0'>/home/$USER/.scripts/playstate"
[module/airvpn]
type = custom/script
exec-if =
exec = "if [[ $(ip addr | grep tun) ]]; then echo 'VPN: connected'; else echo 'VPN: disconnectd'; fi"
tail = true
[module/i3]
type = internal/i3
pin-workspaces = true
strip-wsnumbers = true
index-sort = false
enable-click = false
enable-scroll = false
wrapping-scroll = false
reverse-scroll = false
fuzzy-match = true
ws-icon-0 = 1;
ws-icon-1 = 2;
ws-icon-2 = 3;
ws-icon-3 = 4;
ws-icon-4 = 5;
ws-icon-5 = 6;
ws-icon-6 = 7;
ws-icon-7 = 8;
ws-icon-8 = 9;
ws-icon-default = 
format = <label-state>
label-mode = %mode%
label-mode-padding = 2
label-mode-background = ${colors.black}
label-focused = %name%
label-focused-foreground = ${colors.foreground}
label-focused-background = ${colors.background}
label-focused-underline = ${colors.blue}
label-focused-padding = 4
label-unfocused = %name%
label-unfocused-padding = 4
label-visible = %name%
label-visible-underline = ${colors.red}
label-visible-padding = 4
label-urgent = %name%
label-urgent-foreground = ${colors.black}
label-urgent-background = ${colors.red}
label-urgent-padding = 4
[module/xbacklight]
type = internal/xbacklight
format = <label>
label =  %percentage%%
label-underline = ${colors.yellow}
[module/backlight-acpi]
inherit = module/xbacklight
type = internal/backlight
card = intel_backlight
[module/wlan]
type = internal/network
interface = wlp2s0
interval = 3.0
format-connected = <label-connected>
format-connected-underline = ${colors.cyan}
label-connected =  %essid%
format-disconnected =
;format-disconnected = <label-disconnected>
;format-disconnected-underline = ${self.format-connected-underline}
;label-disconnected = %ifname% disconnected
;label-disconnected-foreground = ${colors.foreground-alt}
[module/date]
type = internal/date
interval = 1
date =
date-alt = " %Y-%m-%d"
time = " %H:%M:%S"
time-alt =
format-prefix =
format-prefix-foreground = ${colors.foreground-alt}
format-underline = ${colors.magenta}
label = %date% %time%
[module/volume]
type = internal/volume
format-volume = <label-volume> <bar-volume>
label-volume = 
label-volume-foreground = ${root.foreground}
format-volume-underline = ${colors.green}
format-muted-foreground = ${colors.foreground-alt}
label-muted =  Muted
label-muted-underline = ${colors.red}
bar-volume-width = 10
bar-volume-foreground-0 = ${colors.green}
bar-volume-foreground-1 = ${colors.green}
bar-volume-foreground-2 = ${colors.green}
bar-volume-foreground-3 = ${colors.green}
bar-volume-foreground-4 = ${colors.green}
bar-volume-foreground-5 = ${colors.yellow}
bar-volume-foreground-6 = ${colors.red}
bar-volume-gradient = true
bar-volume-indicator = |
bar-volume-indicator-font = 2
bar-volume-fill = ─
bar-volume-fill-font = 2
bar-volume-empty = ─
bar-volume-empty-font = 2
bar-volume-empty-foreground = ${colors.foreground-alt}
[module/battery1]
type = internal/battery
battery = BAT0
adapter = AC0
full-at = 98
format-charging = <animation-charging> <label-charging>
format-charging-underline = ${colors.yellow}
format-discharging = <ramp-capacity> <label-discharging>
format-discharging-underline = ${self.format-charging-underline}
format-full-prefix = 
format-full-prefix-foreground = ${colors.foreground-alt}
format-full-underline = ${self.format-charging-underline}
ramp-capacity-0 = 
ramp-capacity-1 = 
ramp-capacity-2 = 
ramp-capacity-3 = 
ramp-capacity-4 = 
ramp-capacity-foreground = ${colors.foreground-alt}
animation-charging-0 = 
animation-charging-1 = 
animation-charging-2 = 
animation-charging-3 = 
animation-charging-4 = 
animation-charging-foreground = ${colors.foreground-alt}
animation-charging-framerate = 750
[module/battery2]
type = internal/battery
battery = BAT1
adapter = ACP0
full-at = 98
format-charging = <animation-charging> <label-charging>
format-charging-underline = ${colors.yellow}
format-discharging = <ramp-capacity> <label-discharging>
format-discharging-underline = ${self.format-charging-underline}
format-full-prefix = 
format-full-prefix-foreground = ${colors.foreground-alt}
format-full-underline = ${self.format-charging-underline}
ramp-capacity-0 = 
ramp-capacity-1 = 
ramp-capacity-2 = 
ramp-capacity-3 = 
ramp-capacity-4 = 
ramp-capacity-foreground = ${colors.foreground-alt}
animation-charging-0 = 
animation-charging-1 = 
animation-charging-2 = 
animation-charging-3 = 
animation-charging-4 = 
animation-charging-foreground = ${colors.foreground-alt}
animation-charging-framerate = 750
# [module/powermenu]
# type = custom/menu
# expand-right = true
# format-spacing = 1
#
# label-open = 
# label-open-foreground = ${colors.magenta}
# label-close = cancel
# label-close-foreground = ${colors.magenta}
# label-separator = |
# label-separator-foreground = ${colors.foreground-alt}
#
# menu-0-0 = power off
# menu-0-0-exec = poweroff
# menu-0-1 = reboot
# menu-0-1-exec = reboot
# menu-0-2 = logout
# menu-0-2-exec = dm-tool lock
;; Power Menu Module
[module/powermenu]
type = custom/text
content = aaa
content-background = ${colors.magenta}
content-foreground = ${colors.magenta}
click-left = ~/.config/rofi/powermenu/type-1/powermenu.sh
click-right = powermenu_t1
[settings]
;screenchange-reload = true
;compositing-background = xor
;compositing-background = screen
;compositing-foreground = source
;compositing-border = over
[global/wm]
margin-top = 5
margin-bottom = 5

208
config/.config/sioyek/keys_user.config
View File

@@ -1,208 +0,0 @@
# you can edit this file to change keybindings lines that start with '#' are comments
# the syntax is pretty simple. Some examples:
#command k (command is executed when k is pressed)
#command <C-k> (command is executed when k is pressed while holding control)
#command <S-k> (command is executed when k is pressed while holding shift)
#command <A-k> (command is executed when k is pressed while holding alt)
#command <S-+> (command is executed when = is pressed while holding shift.
# Note that <S-=> would not work because of a bug in the command system so
# when prefixing non-ascii keys with shift, you have to specify the shift
# modified key in addition to the shift modifier)
#command <C-S-k> (command is executed when k is pressed while holding control and shift)
#command gg (command is executed when g is pressed twice)
#command gt (command is executed when g is pressed and then t is pressed)
#command g<C-n><S-d>t (command is executed when g is pressed and then n is pressed while holding\
# control and then d is pressed while holding shift and then t is pressed)
# ---------- NAVIGATION AND ZOOM ----------
# Goto the begining of document. If prefixed with a number, it will go to that page.
# for example 150gg goes to page 150.
goto_begining gg
goto_begining <C-<home>>
# Opens a prompt to enter page number and jump to that page
goto_page_with_page_number <home>
# Goto the end of the document
goto_end <end>
goto_end <S-g>
# movement (can be prefixed with a number)
move_down <down>
move_up <up>
move_left <right>
move_right <left>
move_down j
move_up k
move_left l
move_right h
# Goto forward for one page width. (can be prefixed with a number)
# (note that going forward for one page width is not usually what you want becaue if
# the page is larger than the screen you will miss some content. What you usually want is screen_down)
next_page <C-<pagedown>>
previous_page <C-<pageup>>
# Go down one screen width (can be prefixed with a number which tells how many screen widths should we go down)
screen_down <space>
screen_up <S-space>
screen_down <pagedown>
screen_up <pageup>
# Goto the next/prev chapter
next_chapter gc
prev_chapter g<S-c>
# Goto previous viewing state and delete the current (and future) state(s).
pop_state w
# if we are not at the end of viewing history, goto the next history point
next_state <l>
# goto the previous history point
prev_state <h>
prev_state <backspace>
next_state <C-<right>>
prev_state <C-<left>>
# Open table of contents.
goto_toc t
# zoom
zoom_in <S-+>
zoom_in =
zoom_out -
# Automatically set the zoom level and horizontal offset such that the current page is centered horizontally and
# it fills the screen width
fit_to_page_width <f9>
# same as fit_to_page_with but ignores page margins
fit_to_page_width_smart <f10>
# Open a file dialog to select a document.
open_document o
open_document_embedded <C-o>
open_document_embedded_from_current_path <C-S-o>
# Open a searchable list of previously opened documents.
open_prev_doc <S-o>
# ---------- SEARCH ----------
# search the document.
# example: /something (searches the document for 'something')
# you can also specify a page range to search:
# example: /<110,135>something (searches pages 110 to 135 (inclusive) for 'something')
search <C-f>
search /
# this is the same as search.
ranged_search r<C-f>
ranged_search r/
# searches the current chapter. This is essentially the same as search but the range prefix is autofilled
# with the range of the current lowest level subchapter.
chapter_search c<C-f>
chapter_search c/
# Goto the next search item. Can be prefixed with a number which is the same as performing the command n times
# for example if we are on the 10th search result and we input 15n, we go to the 25th search result.
next_item n
# Goto the previous search result. Can be prefixed with a number with similar rules as next_item.
previous_item <S-n>
# ---------- BOOKMARKS ----------
# Add a bookmark in the current location (opens a text input where you can specify the bookmark text)
add_bookmark b
delete_bookmark db
# Open bookmarks menu of the current document.
goto_bookmark gb
# Open bookmarks menu of all documents.
goto_bookmark_g g<S-b>
# ---------- HIGHLIGHTS ----------
# you can select a piece of text and press the `add_highlight` shortcut followed by a symbol (a character from a-z) to highlight
# the text
add_highlight h
# search in highlights of current document
goto_highlight gh
# search in highlights of all documents
goto_highlight_g g<S-h>
# click on a highlight and then press the `delete_highlight` shortcut to delete it.
delete_highlight dh
# ---------- MARKS ----------
# Mark the current location. After pressing the mark button, you must enter a symbol (a letter from a-z or A-Z).
# this marks the current location in the file with the entered symbol. Afterwards you will be able to return to
# the locations of the marks using goto_mark command.
# example: mm (marks the current location in the file with a mark named 'm')
set_mark m
# Goto a previously set mark. After pressing goto_mark you must enter a symbol associated with a previously set mark.
# example: `m (goes to the location of the mark named m)
goto_mark `
# ---------- PORTALS ----------
# If we are in default state, goto portal state with the current location in document as the portal source
# if we are already in the portal state, create the portal with the current location as destination.
link p
# Delete the portal with the closest source to current location
delete_link dp
# Goto the position of the portal with the closest source to current location
goto_link <tab>
# Similar to goto_link, except when prev_state is called, the destination of the link is update to be the state
# on which prev_state is called
edit_link <S-p>
edit_link <S-<tab>>
# Open/Close the helper window for portals
toggle_one_window <f12>
# ---------- MISC ----------
# copy selected text
copy y
toggle_fullscreen <f11>
# Toggles whether we highlight pdf links or not
toggle_highlight <f1>
# open command line
command <S-:>
# seach the selected text using one of the search engines defined using search_url_* settings in prefs.config (* can be any letter between 'a' and 'z')
external_search s
#search_selected_text_in_google_scholar ss
#search_selected_text_in_libgen sl
open_selected_url <S-q>
toggle_dark_mode <f8>
# toggle synctex mode. When in synctex mode, right clicking on a pdf launches the corresponding latex page.
toggle_synctex <f4>
# while in mouse drag mode, instead of selecting text you can pan the screen using mouse
toggle_mouse_drag_mode <f6>
# command the move the visual mark to the next/previous line
#move_visual_mark_up k
#move_visual_mark_down j
# In visual scroll mode, mouse wheel performs `move_visual_mark_up` and `move_visual_mark_down` commands
toggle_visual_scroll <f7>
toggle_presentation_mode <f5>
quit q

137
config/.config/sioyek/prefs_user.config
View File

@@ -1,137 +0,0 @@
# (can be 0 or 1) if set, shows a notification on startup if a new version of sioyek is available
check_for_updates_on_startup 0
# The color with which the screen is cleared before rendering the pdf
background_color 1.0 1.0 1.0
dark_mode_background_color 0.0 0.0 0.0
# Showing full white text on black background can be irritating for the eye, we can dim the whites a little bit using the contrast option
dark_mode_contrast 0.8
# Highlight color when text is selected using mouse
text_highlight_color 1.0 1.0 0.0
# The color of highlight bar which is displayed when right click is pressed
vertical_line_color 0.0 0.0 0.0 0.1
# Highlight color when text is a search match
search_highlight_color 0.0 1.0 0.0
# Hihglight color for PDF links (note that highlight is off by default
# and can only be seen by performing a toggle_highlight command. See keys.config for more details)
link_highlight_color 0.0 0.0 1.0
# Hihglight color for synctex forward search highlights
synctex_highlight_color 1.0 0.0 1.0
# urls to use when executing external_search commands
search_url_s https://scholar.google.com/scholar?q=
search_url_l http://gen.lib.rus.ec/scimag/?q=
search_url_g https://www.google.com/search?q=
# which search url to choose when middle clicking or shift middle clicking on text (the values are the letters of corresponding search_url_* )
# for example if i set `middle_click_search_engine s`, then we use the url associated with `search_url_s` to handle middle click searches
middle_click_search_engine s
shift_middle_click_search_engine l
# The factor by which we increase/decrease zoom when performing zoom_in or zoom_out
zoom_inc_factor 1.2
# How many inches we move vertically/horizontally when performing move_* commands
vertical_move_amount 1.0
horizontal_move_amount 1.0
# When performing screen_down/screen_up we usually don't move a full screen because it causes the user to lose context
# Here we specify the fraction of the screen width by which we move when performing these commands
move_screen_percentage 0.5
# If 0, Table of Contents is shown in a hierarchial tree, otherwise it is a flat list (can improve performance for extremely large table of contents)
flat_toc 0
# If it is 1, when launching the application if we detect multiple monitors, we automatically launch the helper window in second monitor
should_use_multiple_monitors 0
# if the last opened document is empty, load the tutorial pdf instead
should_load_tutorial_when_no_other_file 1
# if it is 0, then we use the previous instance of sioyek when launching a new file.
# otherwise a new instance is launched every time we open a new file.
should_launch_new_instance 0
# the command to use when trying to do inverse search into a LaTeX document. Uncomment and provide your own command.
# %1 expands to the name of the file and %2 expans to the line number.
#inverse_search_command "C:\path\to\vscode\Code.exe" -r -g %1:%2
# you can specify the exact highlight color for each of 26 different highlight types
# when moving to the next line using visual marker, this setting specifies the distance of the market to the top of the screen in fractions of screen size
visual_mark_next_page_fraction 0.25
# when moving to the next line using visual marker, this setting determines at which point we move the screen
visual_mark_next_page_fraction 0.2
#Amethyst
highlight_color_a 0.94 0.64 1.00
#Blue
highlight_color_b 0.00 0.46 0.86
#Caramel
highlight_color_c 0.60 0.25 0.00
#Damson
highlight_color_d 0.30 0.00 0.36
#Ebony
highlight_color_e 0.10 0.10 0.10
#Forest
highlight_color_f 0.00 0.36 0.19
#Green
highlight_color_g 0.17 0.81 0.28
#Honeydew
highlight_color_h 1.00 0.80 0.60
#Iron
highlight_color_i 0.50 0.50 0.50
#Jade
highlight_color_j 0.58 1.00 0.71
#Khaki
highlight_color_k 0.56 0.49 0.00
#Lime
highlight_color_l 0.62 0.80 0.00
#Mallow
highlight_color_m 0.76 0.00 0.53
#Navy
highlight_color_n 0.00 0.20 0.50
#Orpiment
highlight_color_o 1.00 0.64 0.02
#Pink
highlight_color_p 1.00 0.66 0.73
#Quagmire
highlight_color_q 0.26 0.40 0.00
#Red
highlight_color_r 1.00 0.00 0.06
#Sky
highlight_color_s 0.37 0.95 0.95
#Turquoise
highlight_color_t 0.00 0.60 0.56
#Uranium
highlight_color_u 0.88 1.00 0.40
#Violet
highlight_color_v 0.45 0.04 1.00
#Wine
highlight_color_w 0.60 0.00 0.00
#Xanthin
highlight_color_x 1.00 1.00 0.50
#Yellow
highlight_color_y 1.00 1.00 0.00
#Zinnia
highlight_color_z 1.00 0.31 0.02
# if set, we display a checkerboard pattern for unrendered pages (by default we display nothing)
should_draw_unrendered_pages 0
# displays an overview of destination when hovering over a link with mouse
hover_overview 0
# Use dark mode by default
default_dark_mode 0
# if set, we sort the bookmarks by their location instead of their creation time
sort_bookmarks_by_location 0

64
config/.config/starship.toml
View File

@@ -1,64 +0,0 @@
format = """
[░▒▓](#a3aed2)\
[  ](bg:#a3aed2 fg:#090c0c)\
[](bg:#769ff0 fg:#a3aed2)\
$directory\
[](fg:#769ff0 bg:#394260)\
$git_branch\
$git_status\
[](fg:#394260 bg:#212736)\
$nodejs\
$rust\
$golang\
$php\
[](fg:#212736 bg:#1d2230)\
$time\
[ ](fg:#1d2230)\
\n$character"""
[directory]
style = "fg:#e3e5e5 bg:#769ff0"
format = "[ $path ]($style)"
truncation_length = 3
truncation_symbol = "…/"
[directory.substitutions]
"Documents" = " "
"Downloads" = " "
"Music" = " "
"Pictures" = " "
[git_branch]
symbol = ""
style = "bg:#394260"
format = '[[ $symbol $branch ](fg:#769ff0 bg:#394260)]($style)'
[git_status]
style = "bg:#394260"
format = '[[($all_status$ahead_behind )](fg:#769ff0 bg:#394260)]($style)'
[nodejs]
symbol = ""
style = "bg:#212736"
format = '[[ $symbol ($version) ](fg:#769ff0 bg:#212736)]($style)'
[rust]
symbol = ""
style = "bg:#212736"
format = '[[ $symbol ($version) ](fg:#769ff0 bg:#212736)]($style)'
[golang]
symbol = "ﳑ"
style = "bg:#212736"
format = '[[ $symbol ($version) ](fg:#769ff0 bg:#212736)]($style)'
[php]
symbol = ""
style = "bg:#212736"
format = '[[ $symbol ($version) ](fg:#769ff0 bg:#212736)]($style)'
[time]
disabled = false
time_format = "%R" # Hour:Minute Format
style = "bg:#1d2230"
format = '[[  $time ](fg:#a0a9cb bg:#1d2230)]($style)'

46
config/.config/termite/config
View File

@@ -1,46 +0,0 @@
[options]
font = Hack Nerd Font Monoo 11
font = DejaVu Sans Mono for Powerline 11
[colors]
[colors]
# special
foreground = #98abb2
foreground_bold = #98abb2
cursor = #98abb2
background = rgba(0,0,0,0.9)
# black
color0 = #000000
color8 = #0c0e14
# red
color1 = #e84f4f
color9 = #d23d3d
# green
color2 = #00ffaf
color10 = #237885
# yellow
color3 = #ffbb24
color11 = #f8ec09
# blue
color4 = #007fff
color12 = #00c4ff
# magenta
color5 = #8c00fd
color13 = #cd00df
# cyan
color6 = #00e8b7
color14 = #00d3a7
# white
color7 = #98abb2
color15 = #c0bfbc