merge

Signed-off-by: Tuan-Dat Tran <tuan-dat.tran@tudattr.dev>

config/.config/cava/config

@@ -0,0 +1,149 @@
+## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+ 
+# Accepts only non-negative values.
+; framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. Autosens must be turned off for this to take effect.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-200). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+; bars = 19
+; bar_width = 2
+; bar_spacing = 1
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+lower_cutoff_freq = 0
+higher_cutoff_freq = 20000
+
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'pulse', 'alsa' or 'fifo'.
+# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+# 
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+method = pulse
+source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+
+
+[output]
+
+# Ouput method. Can be 'ncurses', 'noncurses' or 'raw'. 
+# 'noncurses' is for systems that does not suport ncurses.
+# 'raw' is a 16 bit data stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+; method = ncurses
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' averages both channels and outputs left to right lowest to highest frequencies.
+; channels = stereo
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+
+
+[color]
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires a
+# terminal that can change color definitions such as Gnome-terminal or rxvt.
+; background = black
+; foreground = blue
+
+# Gradient mode, only hex defined colors are supported, background must also be defined in hex
+# or remain commented out. 1 = on, 0 = off. Warning: for certain terminal emulators cava will
+# not able to restore color definitions on exit, simply restart your terminal to restore colors.
+gradient = 1
+# GMK Noel
+gradient_color_1 = '#FFFFFF'
+gradient_color_2 = '#EEB9C1'
+gradient_color_3 = '#B3DCE1'
+gradient_color_4 = '#66B9D2'
+# Cool Blues
+; gradient_color_1 = '#2193b0'
+; gradient_color_2 = '#6dd5ed'
+# Quepal
+; gradient_color_1 = '#11998e'
+; gradient_color_2 = '#38ef7d'
+# Teal Love
+; gradient_color_1 = '#11FFBD'
+; gradient_color_2 = '#AAFFA9'
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+; integral = 70
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable. 
+; monstercat = 1
+; waves = 0;
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+; gravity = 100
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+; ignore = 0
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more then one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble

config/.config/cava/shaders/bar_spectrum.frag

@@ -0,0 +1,79 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+uniform int bar_width;    // bar width (configurable), not used here
+uniform int bar_spacing;    // space bewteen bars (configurable)
+
+uniform vec3 u_resolution; // window resolution
+
+//colors, configurable in cava config file (r,g,b) (0.0 - 1.0)
+uniform vec3 bg_color; // background color
+uniform vec3 fg_color; // foreground color
+
+uniform int gradient_count;
+uniform vec3 gradient_colors[8]; // gradient colors
+
+vec3 normalize_C(float y,vec3 col_1, vec3 col_2, float y_min, float y_max)
+{
+    //create color based on fraction of this color and next color
+    float yr = (y - y_min) / (y_max - y_min);
+    return col_1 * (1.0 - yr) + col_2 * yr;
+}
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    float x = u_resolution.x * fragCoord.x;
+    int bar = int(bars_count * fragCoord.x);
+
+    //calculate a bar size
+    float bar_size = u_resolution.x / bars_count;
+
+    //the y coordinate and bar values are the same
+    float y =  bars[bar];
+
+    // make sure there is a thin line at bottom
+    if (y * u_resolution.y < 1.0)
+    {
+      y = 1.0 / u_resolution.y;
+    }
+
+    //draw the bar up to current height
+    if (y > fragCoord.y)
+    {
+        //make some space between bars basen on settings
+        if (x > (bar + 1) * (bar_size) - bar_spacing)
+        {
+            fragColor = vec4(bg_color,1.0);
+        }
+        else
+        {
+            if (gradient_count == 0)
+            {
+                fragColor = vec4(fg_color,1.0);
+            }
+            else
+            {
+                //find which color in the configured gradient we are at
+                int color = int((gradient_count - 1) * fragCoord.y);
+
+                //find where on y this and next color is supposed to be
+                float y_min = color / (gradient_count - 1.0);
+                float y_max = (color + 1.0) / (gradient_count - 1.0);
+
+                //make color
+                fragColor = vec4(normalize_C(fragCoord.y, gradient_colors[color], gradient_colors[color + 1], y_min, y_max), 1.0);
+            }
+        }
+    }
+    else
+    {
+        fragColor = vec4(bg_color,1.0);
+    }
+}

config/.config/cava/shaders/northern_lights.frag

@@ -0,0 +1,34 @@
+#version 330
+
+in vec2 fragCoord;
+out vec4 fragColor;
+
+// bar values. defaults to left channels first (low to high), then right (high to low).
+uniform float bars[512];
+
+uniform int bars_count;    // number of bars (left + right) (configurable)
+
+uniform vec3 u_resolution; // window resolution, not used here
+
+//colors, configurable in cava config file
+uniform vec3 bg_color; // background color(r,g,b) (0.0 - 1.0), not used here
+uniform vec3 fg_color; // foreground color, not used here
+
+void main()
+{
+    // find which bar to use based on where we are on the x axis
+    int bar = int(bars_count * fragCoord.x);
+
+    float bar_y = 1.0 - abs((fragCoord.y - 0.5)) * 2.0;
+    float y = (bars[bar]) * bar_y;
+
+    float bar_x = (fragCoord.x - float(bar) / float(bars_count)) * bars_count;
+    float bar_r = 1.0 - abs((bar_x - 0.5)) * 2;
+
+    bar_r = bar_r * bar_r * 2;
+
+    // set color
+    fragColor.r = fg_color.x * y * bar_r;
+    fragColor.g = fg_color.y * y * bar_r;
+    fragColor.b = fg_color.z * y * bar_r;
+}

config/.config/cava/shaders/pass_through.vert

@@ -0,0 +1,14 @@
+#version 330
+
+
+// Input vertex data, different for all executions of this shader.
+layout(location = 0) in vec3 vertexPosition_modelspace;
+
+// Output data ; will be interpolated for each fragment.
+out vec2 fragCoord;
+
+void main()
+{
+    gl_Position =  vec4(vertexPosition_modelspace,1);
+    fragCoord  = (vertexPosition_modelspace.xy+vec2(1,1))/2.0;
+}

config/.config/i3/config

@@ -79,8 +79,40 @@ bindsym $mod+Shift+9 move container to workspace $ws9; workspace $ws9
 bindsym $mod+Shift+0 move container to workspace $ws0; workspace $ws0
 
 # Open specific applications in floating mode
+<<<<<<< HEAD
+for_window [class="^Thunderbird$" title="^.*Event:"] floating enable
+
+# https://github.com/z3ntu/dotfiles/blob/master/i3/.config/i3/config
+# Steam
+for_window [class="^Steam$" title="^Friends List$"] floating enable
+for_window [class="^Steam$" title="Steam"] floating enable
+for_window [class="^Steam$" title="^Settings$"] floating enable
+for_window [class="^Steam$" title=".* - event started"] floating enable
+for_window [class="^Steam$" title=".* CD key"] floating enable
+for_window [class="^Steam$" title="^Steam - Self Updater$"] floating enable
+for_window [class="^Steam$" title="^Screenshot Uploader$"] floating enable
+for_window [class="^Steam$" title="^Steam Guard - Computer Authorization Required$"] floating enable
+for_window [title="^Steam Keyboard$"] floating enable
+||||||| e9d53f0
 for_window [class="(?i)virtualbox"] floating enable border normal
 for_window [title="KeePassX$"] floating enable border normal
+for_window [class="^Thunderbird$" title="^.*Event:"] floating enable
+
+# https://github.com/z3ntu/dotfiles/blob/master/i3/.config/i3/config
+# Steam
+for_window [class="^Steam$" title="^Friends List$"] floating enable
+for_window [class="^Steam$" title="Steam"] floating enable
+for_window [class="^Steam$" title="^Settings$"] floating enable
+for_window [class="^Steam$" title=".* - event started"] floating enable
+for_window [class="^Steam$" title=".* CD key"] floating enable
+for_window [class="^Steam$" title="^Steam - Self Updater$"] floating enable
+for_window [class="^Steam$" title="^Screenshot Uploader$"] floating enable
+for_window [class="^Steam$" title="^Steam Guard - Computer Authorization Required$"] floating enable
+for_window [title="^Steam Keyboard$"] floating enable
+=======
+for_window [class="(?i)virtualbox"] floating enable border normal
+for_window [title="KeePassX$"] floating enable border normal
+>>>>>>> clean_emacs
 
 ###############################################################################
 ############################ Startup Applications #############################
@@ -93,7 +125,21 @@ exec --no-startup-id conky -c ~/.conky/syclo-crimson-bottomleft.conkyrc
 # exec --no-startup-id synergyc -f --no-tray --debug INFO --name genesis --enable-crypto 192.168.178.38:24800
 exec --no-startup-id dunst
 exec --no-startup-id ~/.scripts/startup.sh
+<<<<<<< HEAD
+exec --no-startup-id ~/.scripts/battery_stats.sh
+exec --no-startup-id llk
+||||||| e9d53f0
+exec --no-startup-id llk
+exec --no-startup-id emacs --daemon
+=======
+>>>>>>> clean_emacs
 exec --no-startup-id syncthing
+<<<<<<< HEAD
+exec --no-startup-id xrandr --output eDP1 --auto  --left-of HDMI1 --output HDMI1 --off --output DP1 --off
+||||||| e9d53f0
+exec --no-startup-id xrandr --output eDP1 --auto  --left-of HDMI1 --output HDMI1 --off --output DP1 --off; feh --randomize --bg-fill /home/tuan/Pictures/Wallpaper/*
+=======
+>>>>>>> clean_emacs
 exec --no-startup-id feh --randomize --bg-fill $HOME/Pictures/Wallpaper/*   
 
 ###############################################################################
@@ -130,7 +176,17 @@ bindsym XF86AudioPrevious exec "playerctl previous"
 
 # Application Shortcuts
 bindsym $mod+b exec firefox
+<<<<<<< HEAD
+bindsym $mod+p exec firefox --private-window https://mos4.de
+bindsym $mod+e exec emacs
+bindsym $mod+m exec thunderbird
+||||||| e9d53f0
+bindsym $mod+p exec firefox --private-window https://mos4.de
+bindsym $mod+e exec emacsclient -c
+bindsym $mod+m exec thunderbird
+=======
 bindsym $mod+p exec firefox --private-window https://tudattr.dev
+>>>>>>> clean_emacs
 
 # Whole Screen
 bindsym Control+Print exec --no-startup-id ~/.scripts/screenshot.sh screen
@@ -297,3 +353,4 @@ bindsym $mod+g mode "default"
 bindsym Return mode "default"
 bindsym Escape mode "default"
 }
+

config/.config/nushell/.gitignore

@@ -0,0 +1 @@
+history.txt

config/.config/nushell/config.nu

@@ -0,0 +1,614 @@
+# Nushell Config File
+#
+# version = 0.79.1
+
+# For more information on defining custom themes, see
+# https://www.nushell.sh/book/coloring_and_theming.html
+# And here is the theme collection
+# https://github.com/nushell/nu_scripts/tree/main/themes
+let dark_theme = {
+    # color for nushell primitives
+    separator: white
+    leading_trailing_space_bg: { attr: n } # no fg, no bg, attr none effectively turns this off
+    header: green_bold
+    empty: blue
+    # Closures can be used to choose colors for specific values.
+    # The value (in this case, a bool) is piped into the closure.
+    bool: {|| if $in { 'light_cyan' } else { 'light_gray' } }
+    int: white
+    filesize: {|e|
+      if $e == 0b {
+        'white'
+      } else if $e < 1mb {
+        'cyan'
+      } else { 'blue' }
+    }
+    duration: white
+    date: {|| (date now) - $in |
+      if $in < 1hr {
+        'purple'
+      } else if $in < 6hr {
+        'red'
+      } else if $in < 1day {
+        'yellow'
+      } else if $in < 3day {
+        'green'
+      } else if $in < 1wk {
+        'light_green'
+      } else if $in < 6wk {
+        'cyan'
+      } else if $in < 52wk {
+        'blue'
+      } else { 'dark_gray' }
+    }
+    range: white
+    float: white
+    string: white
+    nothing: white
+    binary: white
+    cellpath: white
+    row_index: green_bold
+    record: white
+    list: white
+    block: white
+    hints: dark_gray
+
+    shape_and: purple_bold
+    shape_binary: purple_bold
+    shape_block: blue_bold
+    shape_bool: light_cyan
+    shape_closure: green_bold
+    shape_custom: green
+    shape_datetime: cyan_bold
+    shape_directory: cyan
+    shape_external: cyan
+    shape_externalarg: green_bold
+    shape_filepath: cyan
+    shape_flag: blue_bold
+    shape_float: purple_bold
+    # shapes are used to change the cli syntax highlighting
+    shape_garbage: { fg: white bg: red attr: b}
+    shape_globpattern: cyan_bold
+    shape_int: purple_bold
+    shape_internalcall: cyan_bold
+    shape_list: cyan_bold
+    shape_literal: blue
+    shape_match_pattern: green
+    shape_matching_brackets: { attr: u }
+    shape_nothing: light_cyan
+    shape_operator: yellow
+    shape_or: purple_bold
+    shape_pipe: purple_bold
+    shape_range: yellow_bold
+    shape_record: cyan_bold
+    shape_redirection: purple_bold
+    shape_signature: green_bold
+    shape_string: green
+    shape_string_interpolation: cyan_bold
+    shape_table: blue_bold
+    shape_variable: purple
+    shape_vardecl: purple
+}
+
+let light_theme = {
+    # color for nushell primitives
+    separator: dark_gray
+    leading_trailing_space_bg: { attr: n } # no fg, no bg, attr none effectively turns this off
+    header: green_bold
+    empty: blue
+    # Closures can be used to choose colors for specific values.
+    # The value (in this case, a bool) is piped into the closure.
+    bool: {|| if $in { 'dark_cyan' } else { 'dark_gray' } }
+    int: dark_gray
+    filesize: {|e|
+      if $e == 0b {
+        'dark_gray'
+      } else if $e < 1mb {
+        'cyan_bold'
+      } else { 'blue_bold' }
+    }
+    duration: dark_gray
+  date: {|| (date now) - $in |
+    if $in < 1hr {
+      'purple'
+    } else if $in < 6hr {
+      'red'
+    } else if $in < 1day {
+      'yellow'
+    } else if $in < 3day {
+      'green'
+    } else if $in < 1wk {
+      'light_green'
+    } else if $in < 6wk {
+      'cyan'
+    } else if $in < 52wk {
+      'blue'
+    } else { 'dark_gray' }
+  }
+    range: dark_gray
+    float: dark_gray
+    string: dark_gray
+    nothing: dark_gray
+    binary: dark_gray
+    cellpath: dark_gray
+    row_index: green_bold
+    record: white
+    list: white
+    block: white
+    hints: dark_gray
+
+    shape_and: purple_bold
+    shape_binary: purple_bold
+    shape_block: blue_bold
+    shape_bool: light_cyan
+    shape_closure: green_bold
+    shape_custom: green
+    shape_datetime: cyan_bold
+    shape_directory: cyan
+    shape_external: cyan
+    shape_externalarg: green_bold
+    shape_filepath: cyan
+    shape_flag: blue_bold
+    shape_float: purple_bold
+    # shapes are used to change the cli syntax highlighting
+    shape_garbage: { fg: white bg: red attr: b}
+    shape_globpattern: cyan_bold
+    shape_int: purple_bold
+    shape_internalcall: cyan_bold
+    shape_list: cyan_bold
+    shape_literal: blue
+    shape_match_pattern: green
+    shape_matching_brackets: { attr: u }
+    shape_nothing: light_cyan
+    shape_operator: yellow
+    shape_or: purple_bold
+    shape_pipe: purple_bold
+    shape_range: yellow_bold
+    shape_record: cyan_bold
+    shape_redirection: purple_bold
+    shape_signature: green_bold
+    shape_string: green
+    shape_string_interpolation: cyan_bold
+    shape_table: blue_bold
+    shape_variable: purple
+    shape_vardecl: purple
+}
+
+# External completer example
+# let carapace_completer = {|spans|
+#     carapace $spans.0 nushell $spans | from json
+# }
+
+
+# The default config record. This is where much of your global configuration is setup.
+$env.config = {
+  # true or false to enable or disable the welcome banner at startup
+  show_banner: false
+  ls: {
+    use_ls_colors: true # use the LS_COLORS environment variable to colorize output
+    clickable_links: true # enable or disable clickable links. Your terminal has to support links.
+  }
+  rm: {
+    always_trash: false # always act as if -t was given. Can be overridden with -p
+  }
+  table: {
+    mode: rounded # basic, compact, compact_double, light, thin, with_love, rounded, reinforced, heavy, none, other
+    index_mode: always # "always" show indexes, "never" show indexes, "auto" = show indexes when a table has "index" column
+    show_empty: true # show 'empty list' and 'empty record' placeholders for command output
+    trim: {
+      methodology: wrapping # wrapping or truncating
+      wrapping_try_keep_words: true # A strategy used by the 'wrapping' methodology
+      truncating_suffix: "..." # A suffix used by the 'truncating' methodology
+    }
+  }
+
+  explore: {
+    help_banner: true
+    exit_esc: true
+
+    command_bar_text: '#C4C9C6'
+    # command_bar: {fg: '#C4C9C6' bg: '#223311' }
+
+    status_bar_background: {fg: '#1D1F21' bg: '#C4C9C6' }
+    # status_bar_text: {fg: '#C4C9C6' bg: '#223311' }
+
+    highlight: {bg: 'yellow' fg: 'black' }
+
+    status: {
+      # warn: {bg: 'yellow', fg: 'blue'}
+      # error: {bg: 'yellow', fg: 'blue'}
+      # info: {bg: 'yellow', fg: 'blue'}
+    }
+
+    try: {
+      # border_color: 'red'
+      # highlighted_color: 'blue'
+
+      # reactive: false
+    }
+
+    table: {
+      split_line: '#404040'
+
+      cursor: true
+
+      line_index: true
+      line_shift: true
+      line_head_top: true
+      line_head_bottom: true
+
+      show_head: true
+      show_index: true
+
+      # selected_cell: {fg: 'white', bg: '#777777'}
+      # selected_row: {fg: 'yellow', bg: '#C1C2A3'}
+      # selected_column: blue
+
+      # padding_column_right: 2
+      # padding_column_left: 2
+
+      # padding_index_left: 2
+      # padding_index_right: 1
+    }
+
+    config: {
+      cursor_color: {bg: 'yellow' fg: 'black' }
+
+      # border_color: white
+      # list_color: green
+    }
+  }
+
+  history: {
+    max_size: 10000 # Session has to be reloaded for this to take effect
+    sync_on_enter: true # Enable to share history between multiple sessions, else you have to close the session to write history to file
+    file_format: "plaintext" # "sqlite" or "plaintext"
+    # history_isolation: true # true enables history isolation, false disables it. true will allow the history to be isolated to the current session. false will allow the history to be shared across all sessions.
+  }
+  completions: {
+    case_sensitive: false # set to true to enable case-sensitive completions
+    quick: true  # set this to false to prevent auto-selecting completions when only one remains
+    partial: true  # set this to false to prevent partial filling of the prompt
+    algorithm: "prefix"  # prefix or fuzzy
+    external: {
+      enable: true # set to false to prevent nushell looking into $env.PATH to find more suggestions, `false` recommended for WSL users as this look up my be very slow
+      max_results: 100 # setting it lower can improve completion performance at the cost of omitting some options
+      completer: null # check 'carapace_completer' above as an example
+    }
+  }
+  filesize: {
+    metric: true # true => KB, MB, GB (ISO standard), false => KiB, MiB, GiB (Windows standard)
+    format: "auto" # b, kb, kib, mb, mib, gb, gib, tb, tib, pb, pib, eb, eib, zb, zib, auto
+  }
+  cursor_shape: {
+    emacs: line # block, underscore, line, blink_block, blink_underscore, blink_line (line is the default)
+    vi_insert: block # block, underscore, line , blink_block, blink_underscore, blink_line (block is the default)
+    vi_normal: underscore # block, underscore, line, blink_block, blink_underscore, blink_line (underscore is the default)
+  }
+  color_config: $dark_theme   # if you want a light theme, replace `$dark_theme` to `$light_theme`
+  use_grid_icons: true
+  footer_mode: "25" # always, never, number_of_rows, auto
+  float_precision: 2 # the precision for displaying floats in tables
+  # buffer_editor: "emacs" # command that will be used to edit the current line buffer with ctrl+o, if unset fallback to $env.EDITOR and $env.VISUAL
+  use_ansi_coloring: true
+  edit_mode: emacs # emacs, vi
+  shell_integration: true # enables terminal markers and a workaround to arrow keys stop working issue
+  render_right_prompt_on_last_line: false # true or false to enable or disable right prompt to be rendered on last line of the prompt.
+
+  hooks: {
+    pre_prompt: [{||
+      null  # replace with source code to run before the prompt is shown
+    }]
+    pre_execution: [{||
+      null  # replace with source code to run before the repl input is run
+    }]
+    env_change: {
+      PWD: [{|before, after|
+        null  # replace with source code to run if the PWD environment is different since the last repl input
+      }]
+    }
+    display_output: {||
+      if (term size).columns >= 100 { table -e } else { table }
+    }
+    command_not_found: {||
+      null  # replace with source code to return an error message when a command is not found
+    }
+  }
+  menus: [
+      # Configuration for default nushell menus
+      # Note the lack of source parameter
+      {
+        name: completion_menu
+        only_buffer_difference: false
+        marker: "| "
+        type: {
+            layout: columnar
+            columns: 4
+            col_width: 20   # Optional value. If missing all the screen width is used to calculate column width
+            col_padding: 2
+        }
+        style: {
+            text: green
+            selected_text: green_reverse
+            description_text: yellow
+        }
+      }
+      {
+        name: history_menu
+        only_buffer_difference: true
+        marker: "? "
+        type: {
+            layout: list
+            page_size: 10
+        }
+        style: {
+            text: green
+            selected_text: green_reverse
+            description_text: yellow
+        }
+      }
+      {
+        name: help_menu
+        only_buffer_difference: true
+        marker: "? "
+        type: {
+            layout: description
+            columns: 4
+            col_width: 20   # Optional value. If missing all the screen width is used to calculate column width
+            col_padding: 2
+            selection_rows: 4
+            description_rows: 10
+        }
+        style: {
+            text: green
+            selected_text: green_reverse
+            description_text: yellow
+        }
+      }
+      # Example of extra menus created using a nushell source
+      # Use the source field to create a list of records that populates
+      # the menu
+      {
+        name: commands_menu
+        only_buffer_difference: false
+        marker: "# "
+        type: {
+            layout: columnar
+            columns: 4
+            col_width: 20
+            col_padding: 2
+        }
+        style: {
+            text: green
+            selected_text: green_reverse
+            description_text: yellow
+        }
+        source: { |buffer, position|
+            $nu.scope.commands
+            | where name =~ $buffer
+            | each { |it| {value: $it.name description: $it.usage} }
+        }
+      }
+      {
+        name: vars_menu
+        only_buffer_difference: true
+        marker: "# "
+        type: {
+            layout: list
+            page_size: 10
+        }
+        style: {
+            text: green
+            selected_text: green_reverse
+            description_text: yellow
+        }
+        source: { |buffer, position|
+            $nu.scope.vars
+            | where name =~ $buffer
+            | sort-by name
+            | each { |it| {value: $it.name description: $it.type} }
+        }
+      }
+      {
+        name: commands_with_description
+        only_buffer_difference: true
+        marker: "# "
+        type: {
+            layout: description
+            columns: 4
+            col_width: 20
+            col_padding: 2
+            selection_rows: 4
+            description_rows: 10
+        }
+        style: {
+            text: green
+            selected_text: green_reverse
+            description_text: yellow
+        }
+        source: { |buffer, position|
+            $nu.scope.commands
+            | where name =~ $buffer
+            | each { |it| {value: $it.name description: $it.usage} }
+        }
+      }
+  ]
+  keybindings: [
+    {
+      name: completion_menu
+      modifier: none
+      keycode: tab
+      mode: [emacs vi_normal vi_insert]
+      event: {
+        until: [
+          { send: menu name: completion_menu }
+          { send: menunext }
+        ]
+      }
+    }
+    {
+      name: completion_previous
+      modifier: shift
+      keycode: backtab
+      mode: [emacs, vi_normal, vi_insert] # Note: You can add the same keybinding to all modes by using a list
+      event: { send: menuprevious }
+    }
+    {
+      name: history_menu
+      modifier: control
+      keycode: char_r
+      mode: emacs
+      event: { send: menu name: history_menu }
+    }
+    {
+      name: next_page
+      modifier: control
+      keycode: char_x
+      mode: emacs
+      event: { send: menupagenext }
+    }
+    {
+      name: undo_or_previous_page
+      modifier: control
+      keycode: char_z
+      mode: emacs
+      event: {
+        until: [
+          { send: menupageprevious }
+          { edit: undo }
+        ]
+       }
+    }
+    {
+      name: yank
+      modifier: control
+      keycode: char_y
+      mode: emacs
+      event: {
+        until: [
+          {edit: pastecutbufferafter}
+        ]
+      }
+    }
+    {
+      name: unix-line-discard
+      modifier: control
+      keycode: char_u
+      mode: [emacs, vi_normal, vi_insert]
+      event: {
+        until: [
+          {edit: cutfromlinestart}
+        ]
+      }
+    }
+    {
+      name: kill-line
+      modifier: control
+      keycode: char_k
+      mode: [emacs, vi_normal, vi_insert]
+      event: {
+        until: [
+          {edit: cuttolineend}
+        ]
+      }
+    }
+    # Keybindings used to trigger the user defined menus
+    {
+      name: commands_menu
+      modifier: control
+      keycode: char_t
+      mode: [emacs, vi_normal, vi_insert]
+      event: { send: menu name: commands_menu }
+    }
+    {
+      name: vars_menu
+      modifier: alt
+      keycode: char_o
+      mode: [emacs, vi_normal, vi_insert]
+      event: { send: menu name: vars_menu }
+    }
+    {
+      name: commands_with_description
+      modifier: control
+      keycode: char_s
+      mode: [emacs, vi_normal, vi_insert]
+      event: { send: menu name: commands_with_description }
+    }
+  ]
+}
+
+def add_soft [project] { git remote add soft $"ssh://git.aya00:/($project)" }
+export def --env own_ranger [] {
+  let lastdir_path = $"($env.HOME)/.rangerdir";
+  ^ranger $"--choosedir=($lastdir_path)";
+  let lastdir = (open $lastdir_path);
+  cd $lastdir
+}
+
+def pwd_xsel [] {
+  let path = $"(pwd)";
+  $"cd \"($path)\"; nu;"| xsel -b;
+  $"Copied \"($path)\"; nu;";
+}
+
+alias ll = ls -la
+alias la = ls -a
+alias q = exit
+alias picotik = picocom --b 115199 /dev/ttyUSB0
+alias nmap = ^nmap -T5 --min-parallelism 100 -Pn
+alias ed = emacs --daemon
+alias eledger = emacsclient -nw ~/Documents/Finanzen/Ledger/MyBudget.ledger
+alias sshconfig = emacsclient -nw ~/.ssh/config
+alias econfig = emacsclient -nw ~/.doom.d/init.el
+alias wttr = curl wttr.in/Essen
+alias tvres = xrandr --output HDMI1 --transform 1.02,0,-20,0,1.02,-10,0,0,1
+alias defaultres = xrandr --output HDMI1 --transform 1.00,0,0,0,1.00,0,0,0,1
+alias latexmk = ^latexmk -f -pdf -interaction=nonstopmode
+alias ranger = own_ranger
+alias xselp = pwd_xsel
+
+# git
+alias gpa = git push all --all
+# alias gras = add_soft
+alias gd = git diff
+alias gnd = git --no-pager diff
+alias gp = git push
+alias gcsm = git commit -s -m
+alias gaa = git add --all
+alias gco = git checkout
+alias grv = git remote -v
+# alias kubectl = minikube kubectl --
+
+def completion_nmcli_connection_show [] {
+   nmcli c s | lines | skip 1 | parse -r "(?P<name>.+) +\(?P<uuid>[a-z0-9-]{36}\) +\(?P<type>[a-z]+\)" | where type == wifi | get name | str trim
+}
+
+extern "nmcli c u" [name: string@completion_nmcli_connection_show]
+
+def completion_ssh_host [] {
+    open ~/.ssh/config | parse -r "Host (?P<host>.+)" | get host | uniq | str trim
+}
+
+extern "ssh" [host: string@completion_ssh_host]
+
+def completion_git_branch [] {
+    git --no-pager branch | str replace '\*' ' ' | lines | str trim
+}
+
+extern "git branch" [host: string@completion_git_branch]
+
+def completion_docker_kill [] {
+    docker ps | lines | skip 1 | parse -r '^(?P<container>\w+) +(?P<image>\w+) .*' | get container | str trim
+}
+
+extern "docker kill" [host: string@completion_docker_kill]
+
+def completion_ip_addr [] {
+ ip link | lines | parse -r '\d+: (?P<name>[\w@\.]+):' | get name | str trim
+}
+
+extern "ip addr show" [host: string@completion_ip_addr]
+extern "ip a s" [host: string@completion_ip_addr]
+
+$env.DOCKER_BUILDKIT = 1 # Disable for podman
+source ~/.cache/starship/init.nu

config/.config/nushell/env.nu

@@ -0,0 +1,85 @@
+# Nushell Environment Config File
+#
+# version = 0.83.1
+
+def create_left_prompt [] {
+    mut home = ""
+    try {
+        if $nu.os-info.name == "windows" {
+            $home = $env.USERPROFILE
+        } else {
+            $home = $env.HOME
+        }
+    }
+
+    let dir = ([
+        ($env.PWD | str substring 0..($home | str length) | str replace $home "~"),
+        ($env.PWD | str substring ($home | str length)..)
+    ] | str join)
+
+    let path_color = (if (is-admin) { ansi red_bold } else { ansi green_bold })
+    let separator_color = (if (is-admin) { ansi light_red_bold } else { ansi light_green_bold })
+    let path_segment = $"($path_color)($dir)"
+
+    $path_segment | str replace --all (char path_sep) $"($separator_color)/($path_color)"
+}
+
+def create_right_prompt [] {
+    # create a right prompt in magenta with green separators and am/pm underlined
+    let time_segment = ([
+        (ansi reset)
+        (ansi magenta)
+        (date now | date format '%Y/%m/%d %r')
+    ] | str join | str replace --all "([/:])" $"(ansi green)${1}(ansi magenta)" |
+        str replace --all "([AP]M)" $"(ansi magenta_underline)${1}")
+
+    let last_exit_code = if ($env.LAST_EXIT_CODE != 0) {([
+        (ansi rb)
+        ($env.LAST_EXIT_CODE)
+    ] | str join)
+    } else { "" }
+
+    ([$last_exit_code, (char space), $time_segment] | str join)
+}
+
+# Use nushell functions to define your right and left prompt
+$env.PROMPT_COMMAND = {|| create_left_prompt }
+# $env.PROMPT_COMMAND_RIGHT = {|| create_right_prompt }
+
+# The prompt indicators are environmental variables that represent
+# the state of the prompt
+$env.PROMPT_INDICATOR = {|| " > " }
+$env.PROMPT_INDICATOR_VI_INSERT = {|| " : " }
+$env.PROMPT_INDICATOR_VI_NORMAL = {|| " > " }
+$env.PROMPT_MULTILINE_INDICATOR = {|| "::: " }
+
+# Specifies how environment variables are:
+# - converted from a string to a value on Nushell startup (from_string)
+# - converted from a value back to a string when running external commands (to_string)
+# Note: The conversions happen *after* config.nu is loaded
+$env.ENV_CONVERSIONS = {
+    "PATH": {
+        from_string: { |s| $s | split row (char esep) | path expand --no-symlink }
+        to_string: { |v| $v | path expand --no-symlink | str join (char esep) }
+    }
+    "Path": {
+        from_string: { |s| $s | split row (char esep) | path expand --no-symlink }
+        to_string: { |v| $v | path expand --no-symlink | str join (char esep) }
+    }
+}
+
+# Directories to search for scripts when calling source or use
+$env.NU_LIB_DIRS = [
+    # ($nu.default-config-dir | path join 'scripts') # add <nushell-config-dir>/scripts
+    ($nu.default-config-dir | path join completions) # add <nushell-config-dir>/completions
+]
+
+# Directories to search for plugin binaries when calling register
+$env.NU_PLUGIN_DIRS = [
+    # ($nu.default-config-dir | path join 'plugins') # add <nushell-config-dir>/plugins
+]
+
+# To add entries to PATH (on Windows you might use Path), you can use the following pattern:
+# $env.PATH = ($env.PATH | split row (char esep))
+
+$env.KUBECONFIG = $"($env.HOME)/.kube/config"

config/.config/zellij/config.kdl

@@ -17,6 +17,7 @@ keybinds {
         bind "Alt k" "Alt Up" { MoveFocus "Up"; }
         bind "Alt n"  { NewPane; }
         bind "Alt t"  { NewTab; }
+        bind "Alt w"  { ToggleFloatingPanes; }
         bind "Alt =" "Alt +" { Resize "Increase"; }
         bind "Alt -" { Resize "Decrease"; }
 

config/.local/share/ranger/bookmarks

@@ -0,0 +1,19 @@
+u:/home/tuan/Documents/Uni/Studium
+p:/home/tuan/Documents/Protokolle/FSE
+o:/home/tuan/.dotfiles/config
+m:/home/tuan/Documents/Arbeit/Uni-DuE_NCS_SHK/04_-_Projekte/04-5G_IANA/02-machine-learning/mvr
+a:/home/tuan/Documents/Arbeit/Uni-DuE_NCS_SHK
+l:/home/tuan/Local
+c:/home/tuan/Documents/CTF
+t:/home/tuan/Templates
+w:/home/tuan/workspace_l/home_lab/wiki
+k:/home/tuan/.syncthing/Documents/Uni/Studium/2022_Sommersemester/Bachelorprojekt/Implement EFCF based on libAFL/git/foundry/evm/src/executor
+q:/home/tuan/Documents/Arbeit/Uni-DuE_NCS_SHK/04_-_Projekte/04-5G_IANA/02-gps
+':/home/tuan/workspace_l/rust/LibAFL/fuzzers
+e:/home/tuan/Documents/Uni/Studium/2022&2023_Wintersemester/Bachelorprojekt/ethfuzz
+s:/home/tuan/Pictures/Screenshots
+v:/home/tuan/.aya01/Documents/Arbeit/Uni-DuE_NCS_SHK/04_-_Projekte/06-Server_Setup/ansible
+f:/home/tuan/Documents/Finanzen/Unternehmen/Rechnungen
+g:/home/tuan/workspace_l/home_lab
+r:/home/tuan/Documents/roam
+b:/home/tuan/.syncthing/Documents/Uni/Studium/2022&2023_Wintersemester/Bachelorprojekt/ethfuzz

config/.scripts/battery_stats.nu

@@ -0,0 +1,7 @@
+#!/usr/bin/env nu
+
+let filename = (date now | date format "%s")
+while 1 == 1 {
+    (sudo tlp-stat -b | grep Charge | split column '=' | str trim ) | insert a (date now | date format "%s") | reject column1 | rename Charge Timestamp | to csv -n | str replace " \\[%\\]" "" | save -a $"($filename).csv";
+    sleep 50ms;
+}

config/.scripts/battery_stats.sh

@@ -0,0 +1,10 @@
+#!/bin/bash
+
+FILENAME=$(date -I)
+
+while true; do
+    TIMESTAMP=$(date +%s)
+    STATS=$(acpi | sed "s/.*\([0-9]\{2\}\)%.*/\1/")
+    echo "$TIMESTAMP,$STATS" >> ~/.scripts/battery_$FILENAME.log
+    sleep 1
+done

config/.scripts/clean-nushell-db.nu

@@ -0,0 +1,17 @@
+# clean-nushell-db
+
+#!/usr/bin/env nu
+let db = "~/dotfiles/nushell/.config/nushell/history.sqlite3"
+
+def get_current_row [] {
+  let current_row = (^sqlite3 $db "SELECT COUNT(*) FROM history h")
+  echo $"current rows: ($current_row)"
+}
+
+get_current_row
+# Remove failed commands
+sqlite3 $db "DELETE FROM history WHERE exit_status != 0"
+# Remove duplicates. But keep one.
+# https://stackoverflow.com/a/53693544/6000005
+sqlite3 $db "DELETE FROM history WHERE id NOT IN (SELECT MIN(id) FROM history h  GROUP BY command_line);"
+get_current_row 

config/.ssh/config

@@ -19,7 +19,19 @@ Host git.tudattr.dev
     User git
     IdentityFile /mnt/veracrypt1/git
 
+Host git.tudattr.dev
+    Hostname 192.168.20.12
+    Port 2222
+    User git
+    IdentityFile /mnt/veracrypt1/git
+
 # Homeserver
+Host behemoth
+     HostName 192.168.30.80
+     Port 22
+     User tuan
+     IdentityFile /mnt/veracrypt1/genesis
+
 Host madrigal
      HostName 192.168.70.1
      Port 2200
@@ -53,10 +65,26 @@ Host mii pi aya01 inko naruto inko.mii pi.mii aya01.mii naruto.mii behemoth behe
     User tudattr
     IdentityFile /mnt/veracrypt1/genesis
 
+<<<<<<< HEAD
+Host inko
+    HostName 192.168.20.14
+    Port 22
+    User tudattr
+    IdentityFile /mnt/veracrypt1/genesis
+
+Host naruto
+    HostName 192.168.20.13
+    Port 22
+||||||| e9d53f0
+Host git.aya01
+    HostName 192.168.20.12
+    Port 23231
+=======
 # Work
 Host mini
     HostName 100.76.45.158
     Port 22
+>>>>>>> clean_emacs
     User tudattr
     IdentityFile /mnt/veracrypt1/genesis
 
@@ -66,13 +94,63 @@ Host tail-pi
     User tuant
     IdentityFile /mnt/veracrypt1/work/minis
 
+<<<<<<< HEAD
+Host mii-root
+     HostName 202.61.207.139
+     Port 22
+     User root
+     IdentityFile /mnt/veracrypt1/genesis
+
+Host mii
+     HostName 202.61.207.139
+     Port 22
+     User tudattr
+     IdentityFile /mnt/veracrypt1/genesis
+
+Host aya01.mii
+    HostName 192.168.20.12
+    Port 22
+    User tudattr
+    IdentityFile /mnt/veracrypt1/genesis
+    ProxyJump mii
+
+Host pi.mii
+    HostName 192.168.20.11
+    Port 22
+    User tudattr
+    IdentityFile /mnt/veracrypt1/genesis
+    ProxyJump mii
+
+Host naruto.mii
+    HostName 192.168.20.13
+    Port 22
+    User tudattr
+    IdentityFile /mnt/veracrypt1/genesis
+    ProxyJump mii
+
+# Work
+Host ncs-tailscale
+    HostName 100.93.79.94
+    Port 22
+    User tuant
+    IdentityFile /mnt/veracrypt1/genesis
+
+||||||| e9d53f0
+# Work
+=======
+>>>>>>> clean_emacs
 Host ncs-head
     HostName 132.252.68.50
     Port 2122
     User tuan-dat.tran
     IdentityFile /mnt/veracrypt1/genesis
     ForwardX11 yes
+<<<<<<< HEAD
+    ProxyJump ncs-tailscale
+||||||| e9d53f0
+=======
     ProxyJump tail-pi
+>>>>>>> clean_emacs
 
 Host ncs-head-user
     HostName 132.252.68.50
@@ -153,7 +231,47 @@ Host ncs-node7
 Host ncs-wedge
     Hostname 192.168.1.5
     User user
+<<<<<<< HEAD
+    IdentityFile /mnt/veracrypt1/genesis
+    # ForwardX11 yes
+    ProxyJump ncs-head
 
+||||||| e9d53f0
+    IdentityFile /mnt/veracrypt1/genesis
+    # ForwardX11 yes
+    ProxyJump ncs-head
+
+Host ncs-local-server
+    HostName 192.168.1.1
+    Port 22
+    User tuan-dat.tran
+    IdentityFile /mnt/veracrypt1/tudattr
+    StrictHostKeyChecking no
+
+Host ncs-local-server-user
+    HostName 192.168.1.1
+    Port 22
+    User user
+    IdentityFile /mnt/veracrypt1/tudattr
+    StrictHostKeyChecking no
+
+Host ncs-local-server2
+    HostName 192.168.2.2
+    Port 22
+    User user
+    IdentityFile /mnt/veracrypt1/tudattr
+    StrictHostKeyChecking no
+    ProxyJump ncs-local-server
+
+Host phone
+    Hostname 192.168.30.245
+    Port 2222
+    User tuan-dat.tran
+    IdentityFile /mnt/veracrypt1/genesis
+
+=======
+
+>>>>>>> clean_emacs
 Host ncs-gpu
     Hostname 192.168.1.21
     Port 22
@@ -162,12 +280,49 @@ Host ncs-gpu
     ForwardX11 yes
     ProxyJump ncs-head
     
+<<<<<<< HEAD
+Host ncs-aws-iperf3
+    Hostname 18.185.5.191
+    Port 22
+    User ec2-user
+    IdentityFile /mnt/veracrypt1/work/aws_ncs.pem
+
+||||||| e9d53f0
+Host ncs-aws-iperf3
+    Hostname 18.185.5.191
+    Port 22
+    User ec2-user
+    IdentityFile /mnt/veracrypt1/aws_ncs.pem
+
+=======
+>>>>>>> clean_emacs
 Host ami
     Hostname 3.72.156.214
     Port 22
     User ubuntu
     IdentityFile /mnt/veracrypt1/work/aws-rizk.pem
 
+<<<<<<< HEAD
+Host 5g-mec
+    Hostname 192.168.100.1
+    Port 22
+    User udue
+    IdentityFile /mnt/veracrypt1/genesis
+
+Host 5g-mec-ovpn
+    Hostname 192.168.101.1
+    Port 22
+    User udue
+    IdentityFile /mnt/veracrypt1/genesis
+
+Host minis
+    Hostname 192.168.0.115
+    Port 22
+    User tudattr
+    IdentityFile /mnt/veracrypt1/genesis
+
+||||||| e9d53f0
+=======
 
 ## 5g IANA
 Host 5g-iana-mec
@@ -187,3 +342,4 @@ Host uulm-obu0
 
 Host uulm-obu1
     Hostname 192.168.201.11
+>>>>>>> clean_emacs

zsh/.zshrc

@@ -6,17 +6,49 @@ export PenTestTools=$HOME/Local/PenTesting/
 export CTF=$HOME/Documents/CTF/
 export WORKSPACE=$HOME/workspace_l
 export ZSHRC="$HOME/.zshrc"
+<<<<<<< HEAD
+||||||| e9d53f0
+export VISUAL="emacsclient -t"
+export EDITOR="emacsclient -t"
+=======
 export VISUAL="nvim"
 export EDITOR="nvim"
+>>>>>>> clean_emacs
 
 
 # History
-export HISTSIZE=10000000
+export HISTSIZE=50000
-export SAVEHIST=10000000
+export SAVEHIST=50000
 export HISTTIMEFORMAT="[%F %T] "
+
+# Following commands from: https://registerspill.thorstenball.com/p/which-command-did-you-run-1731-days
+# Immediately append to history file:
+setopt INC_APPEND_HISTORY
+
+# Record timestamp in history:
 setopt EXTENDED_HISTORY
+
+# Expire duplicate entries first when trimming history:
+setopt HIST_EXPIRE_DUPS_FIRST
+
+# Dont record an entry that was just recorded again:
+setopt HIST_IGNORE_DUPS
+
+# Delete old recorded entry if new entry is a duplicate:
+setopt HIST_IGNORE_ALL_DUPS
+
+# Do not display a line previously found:
 setopt HIST_FIND_NO_DUPS
 
+# Dont record an entry starting with a space:
+setopt HIST_IGNORE_SPACE
+
+# Dont write duplicate entries in the history file:
+setopt HIST_SAVE_NO_DUPS
+
+# Share history between all sessions:
+setopt SHARE_HISTORY
+
 # Alias
 alias q="exit"
 alias b="byobu"
@@ -25,7 +57,6 @@ alias cat="bat --pager=never"
 alias ranger='ranger --choosedir=$HOME/.rangerdir; LASTDIR=`cat $HOME/.rangerdir`; cd "$LASTDIR"'
 alias xsel='xsel -ib'
 alias msfconsole="msfconsole -x \"db_connect metasploit@msf\""
-alias nmap="nmap -T5 --min-parallelism 100 -Pn"
 alias ed="\emacs --daemon"
 alias e="open_emacs"
 alias df="df -h"
@@ -63,3 +94,8 @@ source $ZSH/oh-my-zsh.sh
 
 add_soft_git() { git remote add soft ssh://git.aya01:/$1 }
 open_emacs() { emacsclient -c $1 & disown; };
+
+autoload -U +X bashcompinit && bashcompinit
+complete -o nospace -C /usr/bin/terraform terraform
+
+# echo "rm -rf braincells/*"