138 lines
4.3 KiB
C
138 lines
4.3 KiB
C
|
/* Keyboard example with debug channel, for Teensy USB Development Board
|
||
|
* http://www.pjrc.com/teensy/usb_keyboard.html
|
||
|
* Copyright (c) 2008 PJRC.COM, LLC
|
||
|
*
|
||
|
* Permission is hereby granted, free of charge, to any person obtaining a copy
|
||
|
* of this software and associated documentation files (the "Software"), to deal
|
||
|
* in the Software without restriction, including without limitation the rights
|
||
|
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
|
||
|
* copies of the Software, and to permit persons to whom the Software is
|
||
|
* furnished to do so, subject to the following conditions:
|
||
|
*
|
||
|
* The above copyright notice and this permission notice shall be included in
|
||
|
* all copies or substantial portions of the Software.
|
||
|
*
|
||
|
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
|
||
|
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
|
||
|
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
|
||
|
* AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
|
||
|
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
|
||
|
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
|
||
|
* THE SOFTWARE.
|
||
|
*/
|
||
|
|
||
|
#include <avr/io.h>
|
||
|
#include <avr/pgmspace.h>
|
||
|
#include <avr/interrupt.h>
|
||
|
#include <util/delay.h>
|
||
|
#include "usb_keyboard_debug.h"
|
||
|
#include "print.h"
|
||
|
|
||
|
#define LED_CONFIG (DDRD |= (1<<6))
|
||
|
#define LED_ON (PORTD &= ~(1<<6))
|
||
|
#define LED_OFF (PORTD |= (1<<6))
|
||
|
#define CPU_PRESCALE(n) (CLKPR = 0x80, CLKPR = (n))
|
||
|
|
||
|
uint8_t number_keys[10]=
|
||
|
{KEY_0,KEY_1,KEY_2,KEY_3,KEY_4,KEY_5,KEY_6,KEY_7,KEY_8,KEY_9};
|
||
|
|
||
|
uint16_t idle_count=0;
|
||
|
|
||
|
int main(void)
|
||
|
{
|
||
|
uint8_t b, d, mask, i, reset_idle;
|
||
|
uint8_t b_prev=0xFF, d_prev=0xFF;
|
||
|
|
||
|
// set for 16 MHz clock
|
||
|
CPU_PRESCALE(0);
|
||
|
|
||
|
// Configure all port B and port D pins as inputs with pullup resistors.
|
||
|
// See the "Using I/O Pins" page for details.
|
||
|
// http://www.pjrc.com/teensy/pins.html
|
||
|
DDRD = 0x00;
|
||
|
DDRB = 0x00;
|
||
|
PORTB = 0xFF;
|
||
|
PORTD = 0xFF;
|
||
|
|
||
|
// Initialize the USB, and then wait for the host to set configuration.
|
||
|
// If the Teensy is powered without a PC connected to the USB port,
|
||
|
// this will wait forever.
|
||
|
usb_init();
|
||
|
while (!usb_configured()) /* wait */ ;
|
||
|
|
||
|
// Wait an extra second for the PC's operating system to load drivers
|
||
|
// and do whatever it does to actually be ready for input
|
||
|
_delay_ms(1000);
|
||
|
|
||
|
// Configure timer 0 to generate a timer overflow interrupt every
|
||
|
// 256*1024 clock cycles, or approx 61 Hz when using 16 MHz clock
|
||
|
// This demonstrates how to use interrupts to implement a simple
|
||
|
// inactivity timeout.
|
||
|
TCCR0A = 0x00;
|
||
|
TCCR0B = 0x05;
|
||
|
TIMSK0 = (1<<TOIE0);
|
||
|
|
||
|
print("Begin keyboard example program\n");
|
||
|
print("All Port B or Port D pins are inputs with pullup resistors.\n");
|
||
|
print("Any connection to ground on Port B or D pins will result in\n");
|
||
|
print("keystrokes sent to the PC (and debug messages here).\n");
|
||
|
while (1) {
|
||
|
// read all port B and port D pins
|
||
|
b = PINB;
|
||
|
d = PIND;
|
||
|
// check if any pins are low, but were high previously
|
||
|
mask = 1;
|
||
|
reset_idle = 0;
|
||
|
for (i=0; i<8; i++) {
|
||
|
if (((b & mask) == 0) && (b_prev & mask) != 0) {
|
||
|
//usb_keyboard_press(KEY_B, KEY_SHIFT);
|
||
|
//usb_keyboard_press(number_keys[i], 0);
|
||
|
print("Port B, bit ");
|
||
|
phex(i);
|
||
|
print("\n");
|
||
|
reset_idle = 1;
|
||
|
}
|
||
|
if (((d & mask) == 0) && (d_prev & mask) != 0) {
|
||
|
//usb_keyboard_press(KEY_D, KEY_SHIFT);
|
||
|
//usb_keyboard_press(number_keys[i], 0);
|
||
|
print("Port D, bit ");
|
||
|
phex(i);
|
||
|
print("\n");
|
||
|
reset_idle = 1;
|
||
|
}
|
||
|
mask = mask << 1;
|
||
|
}
|
||
|
// if any keypresses were detected, reset the idle counter
|
||
|
if (reset_idle) {
|
||
|
// variables shared with interrupt routines must be
|
||
|
// accessed carefully so the interrupt routine doesn't
|
||
|
// try to use the variable in the middle of our access
|
||
|
cli();
|
||
|
idle_count = 0;
|
||
|
sei();
|
||
|
}
|
||
|
// now the current pins will be the previous, and
|
||
|
// wait a short delay so we're not highly sensitive
|
||
|
// to mechanical "bounce".
|
||
|
b_prev = b;
|
||
|
d_prev = d;
|
||
|
_delay_ms(2);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
// This interrupt routine is run approx 61 times per second.
|
||
|
// A very simple inactivity timeout is implemented, where we
|
||
|
// will send a space character and print a message to the
|
||
|
// hid_listen debug message window.
|
||
|
ISR(TIMER0_OVF_vect)
|
||
|
{
|
||
|
idle_count++;
|
||
|
if (idle_count > 61 * 8) {
|
||
|
idle_count = 0;
|
||
|
print("Timer Event :)\n");
|
||
|
//usb_keyboard_press(KEY_SPACE, 0);
|
||
|
}
|
||
|
}
|
||
|
|
||
|
|