qmk_firmware/keyboards/25keys/zinc/keymaps/default/rules.mk

122 lines
3.7 KiB
Makefile
Raw Normal View History

Remove Full Bootmagic (#13846) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + ``` * update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta
2021-08-07 08:59:56 +02:00
BOOTMAGIC_ENABLE = no # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
2021-12-09 06:05:44 +01:00
NKRO_ENABLE = no
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no # Audio output
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
SWAP_HANDS_ENABLE = no # Enable one-hand typing
2021-09-27 19:50:06 +02:00
LTO_ENABLE = no # if firmware size over limit, try this option
define ZINC_CUSTOMISE_MSG
$(info Zinc customize)
$(info - LED_BACK_ENABLE=$(LED_BACK_ENABLE))
$(info - LED_UNDERGLOW_ENABLE=$(LED_UNDERGLOW_ENABLE))
2020-05-30 22:14:59 +02:00
$(info - LED_BOTH_ENABLE=$(LED_BOTH_ENABLE))
$(info - LED_RGB_CONT=$(LED_RGB_CONT))
$(info - RGB_MATRIX=$(RGB_MATRIX))
$(info - LED_ANIMATION=$(LED_ANIMATIONS))
$(info - IOS_DEVICE_ENABLE=$(IOS_DEVICE_ENABLE))
endef
# Zinc keyboard customize
LED_BACK_ENABLE = no # LED backlight (Enable SK6812mini backlight)
LED_UNDERGLOW_ENABLE = no # LED underglow (Enable WS2812 RGB underlight)
2020-05-30 22:14:59 +02:00
LED_BOTH_ENABLE = no # LED backlight and underglow
LED_RGB_CONT = no # LED continuous backlight or/and underglow between left Zinc and right Zinc
RGB_MATRIX = no # RGB LED Matrix
RGB_MATRIX_SPLIT_RIGHT = no # RGB Matrix for RIGHT Hand
LED_ANIMATIONS = yes # LED animations
IOS_DEVICE_ENABLE = no # connect to IOS device (iPad,iPhone)
#### LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE.
#### Do not enable these with audio at the same time.
### Zinc keyboard 'default' keymap: convenient command line option
## make ZINC=<options> zinc:defualt
2020-05-30 22:14:59 +02:00
## option= back | under | both | cont | matrix | na | ios
## ex.
## make ZINC=under zinc:defualt
## make ZINC=under,ios zinc:defualt
## make ZINC=back zinc:default
## make ZINC=back,na zinc:default
## make ZINC=back,ios zinc:default
ifneq ($(strip $(ZINC)),)
ifeq ($(findstring back,$(ZINC)), back)
LED_BACK_ENABLE = yes
2020-05-30 22:14:59 +02:00
endif
ifeq ($(findstring under,$(ZINC)), under)
LED_UNDERGLOW_ENABLE = yes
endif
2020-05-30 22:14:59 +02:00
ifeq ($(findstring both,$(ZINC)), both)
LED_BOTH_ENABLE = yes
endif
ifeq ($(findstring cont,$(ZINC)), cont)
LED_RGB_CONT = yes
endif
ifeq ($(findstring matrix,$(ZINC)), matrix)
RGB_MATRIX = yes
endif
ifeq ($(findstring right,$(ZINC)), right)
RGB_MATRIX_SPLIT_RIGHT = yes
endif
ifeq ($(findstring na,$(ZINC)), na)
LED_ANIMATIONS = no
endif
ifeq ($(findstring ios,$(ZINC)), ios)
IOS_DEVICE_ENABLE = yes
endif
$(eval $(call ZINC_CUSTOMISE_MSG))
$(info )
endif
ifeq ($(strip $(LED_BACK_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
2020-05-30 22:14:59 +02:00
OPT_DEFS += -DRGBLED_BOTH
$(info LED_BOTH_ENABLE option is enabled instead of LED_BACK_ENABLE and LED_UNDERGLOW_ENABLE)
else
OPT_DEFS += -DRGBLED_BACK
endif
else ifeq ($(strip $(LED_UNDERGLOW_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
else
RGBLIGHT_ENABLE = no
endif
2020-05-30 22:14:59 +02:00
ifeq ($(strip $(LED_BOTH_ENABLE)), yes)
RGBLIGHT_ENABLE = yes
OPT_DEFS += -DRGBLED_BOTH
endif
ifeq ($(strip $(LED_RGB_CONT)), yes)
OPT_DEFS += -DRGBLED_CONT
endif
ifeq ($(strip $(RGB_MATRIX)), yes)
RGBLIGHT_ENABLE = no
2020 November 28 Breaking Changes Update (#11053) * Branch point for 2020 November 28 Breaking Change * Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183) * Add support for soft serial to ATmega32U2 (#10204) * Change MIDI velocity implementation to allow direct control of velocity value (#9940) * Add ability to build a subset of all keyboards based on platform. * Actually use eeprom_driver_init(). * Make bootloader_jump weak for ChibiOS. (#10417) * Joystick 16-bit support (#10439) * Per-encoder resolutions (#10259) * Share button state from mousekey to pointing_device (#10179) * Add hotfix for chibios keyboards not wake (#10088) * Add advanced/efficient RGB Matrix Indicators (#8564) * Naming change. * Support for STM32 GPIOF,G,H,I,J,K (#10206) * Add milc as a dependency and remove the installed milc (#10563) * ChibiOS upgrade: early init conversions (#10214) * ChibiOS upgrade: configuration file migrator (#9952) * Haptic and solenoid cleanup (#9700) * XD75 cleanup (#10524) * OLED display update interval support (#10388) * Add definition based on currently-selected serial driver. (#10716) * New feature: Retro Tapping per key (#10622) * Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638) * Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530) * Rescale both ChibiOS and AVR backlighting. * Reduce Helix keyboard build variation (#8669) * Minor change to behavior allowing display updates to continue between task ticks (#10750) * Some GPIO manipulations in matrix.c change to atomic. (#10491) * qmk cformat (#10767) * [Keyboard] Update the Speedo firmware for v3.0 (#10657) * Maartenwut/Maarten namechange to evyd13/Evy (#10274) * [quantum] combine repeated lines of code (#10837) * Add step sequencer feature (#9703) * aeboards/ext65 refactor (#10820) * Refactor xelus/dawn60 for Rev2 later (#10584) * add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824) * [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549) * update chibios os usb for the otg driver (#8893) * Remove HD44780 References, Part 4 (#10735) * [Keyboard] Add Valor FRL TKL (+refactor) (#10512) * Fix cursor position bug in oled_write_raw functions (#10800) * Fixup version.h writing when using SKIP_VERSION=yes (#10972) * Allow for certain code in the codebase assuming length of string. (#10974) * Add AT90USB support for serial.c (#10706) * Auto shift: support repeats and early registration (#9826) * Rename ledmatrix.h to match .c file (#7949) * Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231) * Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840) * Merge point for 2020 Nov 28 Breaking Change
2020-11-28 21:02:18 +01:00
RGB_MATRIX_ENABLE = yes
2020-05-30 22:14:59 +02:00
endif
ifeq ($(strip $(IOS_DEVICE_ENABLE)), yes)
2020-05-30 22:14:59 +02:00
OPT_DEFS += -DIOS_DEVICE_ENABLE
endif
ifeq ($(strip $(LED_ANIMATIONS)), yes)
2020-05-30 22:14:59 +02:00
# OPT_DEFS += -DRGBLIGHT_ANIMATIONS
OPT_DEFS += -DLED_ANIMATIONS
endif
2020-05-30 22:14:59 +02:00
ifeq ($(strip $(RGB_MATRIX_SPLIT_RIGHT)), yes)
OPT_DEFS += -DRGB_MATRIX_SPLIT_RIGHT
endif
# Uncomment these for debugging
# $(info -- RGBLIGHT_ENABLE=$(RGBLIGHT_ENABLE))
# $(info -- OPT_DEFS=$(OPT_DEFS))
# $(info )