qmk_firmware/keyboards/hhkb/yang/config.h

124 lines
3.9 KiB
C
Raw Normal View History

/*
Copyright 2020 Kan-Ru Chen <kanru@kanru.info>
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* key matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 8
/* matrix power saving */
#define MATRIX_POWER_SAVE_TIMEOUT_MS 10000
#define MATRIX_POWER_SAVE_TIMEOUT_L2_MS 1800000
#define MATRIX_POWER_SAVE_TIMEOUT_L3_MS 7200000
#define LED_CAPS_LOCK_PIN F4
#ifdef BLUETOOTH_ENABLE
# define OUTPUT_DEFAULT OUTPUT_AUTO
# undef SERIAL_UART_BAUD
# undef SERIAL_UART_DATA
# undef SERIAL_UART_UBRR
# undef SERIAL_UART_RXD_VECT
# undef SERIAL_UART_TXD_READY
# undef SERIAL_UART_INIT
# define SERIAL_UART_BAUD 76800
# define SERIAL_UART_DATA UDR1
# define SERIAL_UART_UBRR (F_CPU / (8UL * SERIAL_UART_BAUD) - 1)
# define SERIAL_UART_RXD_VECT USART1_RX_vect
# define SERIAL_UART_TXD_READY (UCSR1A & _BV(UDRE1))
# define SERIAL_UART_INIT() \
do { \
cli(); \
/* baud rate */ \
UBRR1L = SERIAL_UART_UBRR; \
/* baud rate */ \
UBRR1H = SERIAL_UART_UBRR >> 8; \
/* enable TX */ \
UCSR1B |= (0 << TXCIE1) | (1 << TXEN1); \
/* enable RX */ \
UCSR1B |= (1 << RXCIE1) | (1 << RXEN1); \
/* parity: none(00), even(01), odd(11) */ \
UCSR1C |= (0 << UPM11) | (0 << UPM10); \
/* 2x speed (error = 0.2%) */ \
UCSR1A |= (1 << U2X1); \
sei(); \
} while (0)
#endif
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
* This is useful for the Windows task manager shortcut (ctrl+shift+esc).
*/
//#define GRAVE_ESC_CTRL_OVERRIDE
/*
* Force NKRO
*
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
* makefile for this to work.)
*
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
* until the next keyboard reset.
*
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
* fully operational during normal computer usage.
*
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
* power-up.
*
*/
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
/* Bootmagic Lite key configuration */
//#define BOOTMAGIC_LITE_ROW 0
//#define BOOTMAGIC_LITE_COLUMN 0
//#define DEBUG_MATRIX_SCAN_RATE
// Disable debounce
#define DEBOUNCE 0