diff --git a/keyboards/adafruit/macropad/config.h b/keyboards/adafruit/macropad/config.h new file mode 100644 index 0000000000..8d7298e09c --- /dev/null +++ b/keyboards/adafruit/macropad/config.h @@ -0,0 +1,137 @@ +/* Copyright 2022 Jose Pablo Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "config_common.h" + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 3 + +#define VENDOR_ID 0x239A +#define PRODUCT_ID 0x0108 +#define DEVICE_VER 0x0001 +#define MANUFACTURER Adafruit +#define PRODUCT Macropad RP2040 + +/* Keyboard Matrix Assignments */ +// clang-format off +#define DIRECT_PINS { \ + { NO_PIN, NO_PIN, GP0 }, \ + { GP1, GP2, GP3 }, \ + { GP4, GP5, GP6 }, \ + { GP7, GP8, GP9 }, \ + { GP10, GP11, GP12 } \ +} +// clang-format on + +/* OLED SPI Defines */ +#define OLED_DISPLAY_128X64 +#define OLED_IC OLED_IC_SH1106 + +/* OLED SPI Pins */ +#define OLED_DC_PIN GP24 +#define OLED_CS_PIN GP22 +#define OLED_RST_PIN GP23 + +/* Shift OLED columns by 2 pixels */ +#define OLED_COLUMN_OFFSET 2 + +/* Divisor for OLED */ +#define OLED_SPI_DIVISOR 4 + +/* ChibiOS SPI definitions */ +#define SPI_DRIVER SPID1 +#define SPI_SCK_PIN GP26 +#define SPI_MOSI_PIN GP27 +#define SPI_MISO_PIN GP28 + +/* Encoders */ +#define ENCODERS_PAD_A { GP18 } +#define ENCODERS_PAD_B { GP17 } + +#define DEBOUNCE 5 + +/* Bootmagic lite */ +/* (Press the Encoder button while plugging the keyboard to enter the bootloader) */ +#define BOOTMAGIC_LITE_ROW 0 +#define BOOTMAGIC_LITE_COLUMN 2 + +/* Double tap the side button to enter bootloader */ +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_LED GP13 +#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 500U + +/* Audio (Unsupported for now)*/ +// #define AUDIO_PIN GP16 +// #define SPEAKER_SHUTDOWN GP14 + +#ifdef RGB_MATRIX_ENABLE + + /* RGB Defines */ +# define RGB_DI_PIN GP19 +# define DRIVER_LED_TOTAL 12 +# define RGBLED_NUM 12 + + /* Enable Framebuffer and keypress effects */ +# define RGB_MATRIX_FRAMEBUFFER_EFFECTS +# define RGB_MATRIX_KEYPRESSES + +# define ENABLE_RGB_MATRIX_ALPHAS_MODS +# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN +# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_BREATHING +# define ENABLE_RGB_MATRIX_BAND_SAT +# define ENABLE_RGB_MATRIX_BAND_VAL +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT +# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT +# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL +# define ENABLE_RGB_MATRIX_CYCLE_ALL +# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT +# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN +# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN +# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL +# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL +# define ENABLE_RGB_MATRIX_CYCLE_SPIRAL +# define ENABLE_RGB_MATRIX_DUAL_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_BEACON +# define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS +# define ENABLE_RGB_MATRIX_RAINDROPS +# define ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS +# define ENABLE_RGB_MATRIX_HUE_BREATHING +# define ENABLE_RGB_MATRIX_HUE_PENDULUM +# define ENABLE_RGB_MATRIX_HUE_WAVE +# define ENABLE_RGB_MATRIX_PIXEL_RAIN +# define ENABLE_RGB_MATRIX_PIXEL_FLOW +# define ENABLE_RGB_MATRIX_PIXEL_FRACTAL +# define ENABLE_RGB_MATRIX_TYPING_HEATMAP +# define ENABLE_RGB_MATRIX_DIGITAL_RAIN +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS +# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS +# define ENABLE_RGB_MATRIX_SPLASH +# define ENABLE_RGB_MATRIX_MULTISPLASH +# define ENABLE_RGB_MATRIX_SOLID_SPLASH +# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH +#endif diff --git a/keyboards/adafruit/macropad/halconf.h b/keyboards/adafruit/macropad/halconf.h new file mode 100644 index 0000000000..6cd66fd520 --- /dev/null +++ b/keyboards/adafruit/macropad/halconf.h @@ -0,0 +1,28 @@ +/* Copyright 2022 Jose Pablo Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include_next + +#undef HAL_USE_SPI +#define HAL_USE_SPI TRUE + +#undef SPI_USE_WAIT +#define SPI_USE_WAIT TRUE + +#undef SPI_SELECT_MODE +#define SPI_SELECT_MODE SPI_SELECT_MODE_PAD diff --git a/keyboards/adafruit/macropad/info.json b/keyboards/adafruit/macropad/info.json new file mode 100644 index 0000000000..ffa31780a9 --- /dev/null +++ b/keyboards/adafruit/macropad/info.json @@ -0,0 +1,24 @@ +{ + "keyboard_name": "Adafruit Macropad RP2040", + "url": "https://learn.adafruit.com/adafruit-macropad-rp2040", + "maintainer": "Jpe230", + "layouts": { + "LAYOUT": { + "layout": [ + {"label":"Mute", "x":2, "y":0}, + {"label":"Enter", "x":0, "y":1}, + {"label":"KC_0", "x":1, "y":1}, + {"label":"BackSpace", "x":2, "y":1}, + {"label":"KC_7", "x":0, "y":2}, + {"label":"KC_8", "x":1, "y":2}, + {"label":"KC_9", "x":2, "y":2}, + {"label":"KC_4", "x":0, "y":3}, + {"label":"KC_5", "x":1, "y":3}, + {"label":"KC_6", "x":2, "y":3}, + {"label":"KC_1", "x":0, "y":4}, + {"label":"KC_2", "x":1, "y":4}, + {"label":"KC_3", "x":2, "y":4} + ] + } + } +} diff --git a/keyboards/adafruit/macropad/keymaps/default/keymap.c b/keyboards/adafruit/macropad/keymaps/default/keymap.c new file mode 100644 index 0000000000..26c6b4ccf2 --- /dev/null +++ b/keyboards/adafruit/macropad/keymaps/default/keymap.c @@ -0,0 +1,114 @@ +/* Copyright 2022 Jose Pablo Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include QMK_KEYBOARD_H + +const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { + [0] = LAYOUT( + KC_MUTE, + KC_ENT, KC_0, KC_BSPC, + KC_7, KC_8, KC_9, + KC_4, KC_5, KC_6, + KC_1, KC_2, KC_3 + ) +}; + +#ifdef ENCODER_MAP_ENABLE +const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = { + [0] = { ENCODER_CCW_CW(KC_VOLU, KC_VOLD) }, +}; +#endif + + +#ifdef OLED_ENABLE +static void render_qmk_logo(void) { + static const char PROGMEM qmk_logo[] = { + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x3f, 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3e, 0x3f, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, + 0x3f, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3e, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3f, 0x3f, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x03, 0x83, 0x83, 0x83, 0x83, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xfe, 0xfe, 0xfe, 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfe, 0xfe, + 0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfe, 0xfe, 0xfe, 0xfe, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x83, 0x83, 0x83, 0x83, 0x83, 0x03, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x81, 0x83, 0x83, 0x83, 0x83, 0x83, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, + 0xff, 0xff, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x83, 0x83, 0x83, 0x83, 0x83, 0x81, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x01, 0x07, 0x1f, 0x3f, 0x7f, 0x7e, 0xf8, 0xf0, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xff, 0xff, + 0xff, 0xff, 0xe0, 0xe0, 0xe0, 0xe0, 0xe0, 0xf0, 0xf8, 0x7e, 0x7f, 0x3f, 0x1f, 0x07, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x81, 0x81, 0x81, 0x81, 0x81, 0x81, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xc0, 0xc1, 0xc1, 0xc1, 0xc1, 0xc1, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0xff, 0xff, + 0xff, 0xff, 0x01, 0x01, 0x01, 0x01, 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xc1, 0xc1, 0xc1, 0xc1, 0xc1, 0xc0, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0xfc, 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x7c, 0xfc, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, + 0xfc, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0x7c, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfc, 0xfc, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 + }; + + oled_write_raw_P(qmk_logo, sizeof(qmk_logo)); +} + +bool oled_task_user(void) { + render_qmk_logo(); + return true; +} + +#endif + diff --git a/keyboards/adafruit/macropad/lib/oled_driver_spi.h b/keyboards/adafruit/macropad/lib/oled_driver_spi.h new file mode 100644 index 0000000000..c8a2cd7d9a --- /dev/null +++ b/keyboards/adafruit/macropad/lib/oled_driver_spi.h @@ -0,0 +1,29 @@ +/* Copyright 2022 Jose Pablo Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ +#pragma once + +#ifndef OLED_DC_PIN +# error "The OLED driver in SPI needs a D/C pin defined" +#endif +#ifndef OLED_CS_PIN +# error "The OLED driver in SPI needs a CS pin defined" +#endif +#ifndef OLED_SPI_MODE +# define OLED_SPI_MODE 3 +#endif +#ifndef OLED_SPI_DIVISOR +# define OLED_SPI_DIVISOR 2 +#endif diff --git a/keyboards/adafruit/macropad/lib/ssd1306_sh1106.c b/keyboards/adafruit/macropad/lib/ssd1306_sh1106.c new file mode 100644 index 0000000000..dc1289fdb1 --- /dev/null +++ b/keyboards/adafruit/macropad/lib/ssd1306_sh1106.c @@ -0,0 +1,827 @@ +/* +Copyright 2019 Ryan Caltabiano +Copyright 2022 Jose Pablo Ramirez +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "oled_driver.h" +#include "oled_driver_spi.h" + +#include "spi_master.h" + +#include +#include OLED_FONT_H +#include "timer.h" +#include "print.h" + +#include + +#include "progmem.h" + +#include "keyboard.h" + +// Used commands from spec sheet: https://cdn-shop.adafruit.com/datasheets/SSD1306.pdf +// for SH1106: https://www.velleman.eu/downloads/29/infosheets/sh1106_datasheet.pdf + +// Fundamental Commands +#define CONTRAST 0x81 +#define DISPLAY_ALL_ON 0xA5 +#define DISPLAY_ALL_ON_RESUME 0xA4 +#define NORMAL_DISPLAY 0xA6 +#define INVERT_DISPLAY 0xA7 +#define DISPLAY_ON 0xAF +#define DISPLAY_OFF 0xAE +#define NOP 0xE3 + +// Scrolling Commands +#define ACTIVATE_SCROLL 0x2F +#define DEACTIVATE_SCROLL 0x2E +#define SCROLL_RIGHT 0x26 +#define SCROLL_LEFT 0x27 +#define SCROLL_RIGHT_UP 0x29 +#define SCROLL_LEFT_UP 0x2A + +// Addressing Setting Commands +#define MEMORY_MODE 0x20 +#define COLUMN_ADDR 0x21 +#define PAGE_ADDR 0x22 +#define PAM_SETCOLUMN_LSB 0x00 +#define PAM_SETCOLUMN_MSB 0x10 +#define PAM_PAGE_ADDR 0xB0 // 0xb0 -- 0xb7 + +// Hardware Configuration Commands +#define DISPLAY_START_LINE 0x40 +#define SEGMENT_REMAP 0xA0 +#define SEGMENT_REMAP_INV 0xA1 +#define MULTIPLEX_RATIO 0xA8 +#define COM_SCAN_INC 0xC0 +#define COM_SCAN_DEC 0xC8 +#define DISPLAY_OFFSET 0xD3 +#define COM_PINS 0xDA +#define COM_PINS_SEQ 0x02 +#define COM_PINS_ALT 0x12 +#define COM_PINS_SEQ_LR 0x22 +#define COM_PINS_ALT_LR 0x32 + +// Timing & Driving Commands +#define DISPLAY_CLOCK 0xD5 +#define PRE_CHARGE_PERIOD 0xD9 +#define VCOM_DETECT 0xDB + +// Advance Graphic Commands +#define FADE_BLINK 0x23 +#define ENABLE_FADE 0x20 +#define ENABLE_BLINK 0x30 + +// Charge Pump Commands +#define CHARGE_PUMP 0x8D + +// Misc defines +#ifndef OLED_BLOCK_COUNT +# define OLED_BLOCK_COUNT (sizeof(OLED_BLOCK_TYPE) * 8) +#endif +#ifndef OLED_BLOCK_SIZE +# define OLED_BLOCK_SIZE (OLED_MATRIX_SIZE / OLED_BLOCK_COUNT) +#endif + +#define OLED_ALL_BLOCKS_MASK (((((OLED_BLOCK_TYPE)1 << (OLED_BLOCK_COUNT - 1)) - 1) << 1) | 1) + +#define ARRAY_SIZE(arr) sizeof(arr)/sizeof(arr[0]) + +// spi defines +#define OLED_STATUS_SUCCESS SPI_STATUS_SUCCESS + +void oled_spi_init(void) { + spi_init(); + + setPinOutput(OLED_CS_PIN); + writePinHigh(OLED_CS_PIN); + + setPinOutput(OLED_DC_PIN); + writePinLow(OLED_DC_PIN); +} + +void oled_spi_start(void) { + spi_start(OLED_CS_PIN, false, OLED_SPI_MODE, OLED_SPI_DIVISOR); +} + +void oled_spi_stop(void) { + spi_stop(); +} + +// Transmit/Write Funcs. +bool oled_cmd(const uint8_t *data, uint16_t size) { + oled_spi_start(); + // Command Mode + writePinLow(OLED_DC_PIN); + // Send the commands + if(spi_transmit(data, size) != OLED_STATUS_SUCCESS){ + oled_spi_stop(); + return false; + } + oled_spi_stop(); + return true; +} + +bool oled_cmd_p(const uint8_t *data, uint16_t size) { + return oled_cmd(data, size); +} + +bool oled_write_reg(const uint8_t *data, uint16_t size) +{ + oled_spi_start(); + // Command Mode + writePinHigh(OLED_DC_PIN); + // Send the commands + if(spi_transmit(data, size) != OLED_STATUS_SUCCESS){ + oled_spi_stop(); + return false; + } + oled_spi_stop(); + return true; +} + +#define HAS_FLAGS(bits, flags) ((bits & flags) == flags) + +// Display buffer's is the same as the OLED memory layout +// this is so we don't end up with rounding errors with +// parts of the display unusable or don't get cleared correctly +// and also allows for drawing & inverting +uint8_t oled_buffer[OLED_MATRIX_SIZE]; +uint8_t * oled_cursor; +OLED_BLOCK_TYPE oled_dirty = 0; +bool oled_initialized = false; +bool oled_active = false; +bool oled_scrolling = false; +bool oled_inverted = false; +uint8_t oled_brightness = OLED_BRIGHTNESS; +oled_rotation_t oled_rotation = 0; +uint8_t oled_rotation_width = 0; +uint8_t oled_scroll_speed = 0; // this holds the speed after being remapped to ssd1306 internal values +uint8_t oled_scroll_start = 0; +uint8_t oled_scroll_end = 7; +#if OLED_TIMEOUT > 0 +uint32_t oled_timeout; +#endif +#if OLED_SCROLL_TIMEOUT > 0 +uint32_t oled_scroll_timeout; +#endif +#if OLED_UPDATE_INTERVAL > 0 +uint16_t oled_update_timeout; +#endif + +// Flips the rendering bits for a character at the current cursor position +static void InvertCharacter(uint8_t *cursor) { + const uint8_t *end = cursor + OLED_FONT_WIDTH; + while (cursor < end) { + *cursor = ~(*cursor); + cursor++; + } +} + +bool oled_init(oled_rotation_t rotation) { + oled_rotation = oled_init_user(oled_init_kb(rotation)); + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + oled_rotation_width = OLED_DISPLAY_WIDTH; + } else { + oled_rotation_width = OLED_DISPLAY_HEIGHT; + } + + oled_spi_init(); + +#ifdef OLED_RST_PIN + /* Reset device */ + setPinOutput(OLED_RST_PIN); + writePinLow(OLED_RST_PIN); + wait_ms(20); + writePinHigh(OLED_RST_PIN); + wait_ms(20); +#endif + + static const uint8_t PROGMEM display_setup1[] = { + DISPLAY_OFF, + DISPLAY_CLOCK, + 0x80, + MULTIPLEX_RATIO, + OLED_DISPLAY_HEIGHT - 1, + DISPLAY_OFFSET, + 0x00, + DISPLAY_START_LINE | 0x00, + CHARGE_PUMP, + 0x14, +#if (OLED_IC != OLED_IC_SH1106) + // MEMORY_MODE is unsupported on SH1106 (Page Addressing only) + MEMORY_MODE, + 0x00, // Horizontal addressing mode +#endif + }; + + if (!oled_cmd_p(display_setup1, ARRAY_SIZE(display_setup1))) { + print("oled_init cmd set 1 failed\n"); + return false; + } + + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_180)) { + static const uint8_t PROGMEM display_normal[] = {SEGMENT_REMAP_INV, COM_SCAN_DEC}; + if (!oled_cmd_p(display_normal, ARRAY_SIZE(display_normal))) { + print("oled_init cmd normal rotation failed\n"); + return false; + } + } else { + static const uint8_t PROGMEM display_flipped[] = {SEGMENT_REMAP, COM_SCAN_INC}; + if (!oled_cmd_p(display_flipped, ARRAY_SIZE(display_flipped))) { + print("display_flipped failed\n"); + return false; + } + } + + static const uint8_t PROGMEM display_setup2[] = {COM_PINS, OLED_COM_PINS, CONTRAST, OLED_BRIGHTNESS, PRE_CHARGE_PERIOD, 0xF1, VCOM_DETECT, 0x20, DISPLAY_ALL_ON_RESUME, NORMAL_DISPLAY, DEACTIVATE_SCROLL, DISPLAY_ON}; + if (!oled_cmd_p(display_setup2, ARRAY_SIZE(display_setup2))) { + print("display_setup2 failed\n"); + return false; + } + +#if OLED_TIMEOUT > 0 + oled_timeout = timer_read32() + OLED_TIMEOUT; +#endif +#if OLED_SCROLL_TIMEOUT > 0 + oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT; +#endif + + oled_clear(); + oled_initialized = true; + oled_active = true; + oled_scrolling = false; + return true; +} + +__attribute__((weak)) oled_rotation_t oled_init_kb(oled_rotation_t rotation) { + return rotation; +} +__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { + return rotation; +} + +void oled_clear(void) { + memset(oled_buffer, 0, sizeof(oled_buffer)); + oled_cursor = &oled_buffer[0]; + oled_dirty = OLED_ALL_BLOCKS_MASK; +} + +static void calc_bounds(uint8_t update_start, uint8_t *cmd_array) { + // Calculate commands to set memory addressing bounds. + uint8_t start_page = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_WIDTH; + uint8_t start_column = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_WIDTH; +#if (OLED_IC == OLED_IC_SH1106) + // Commands for Page Addressing Mode. Sets starting page and column; has no end bound. + // Column value must be split into high and low nybble and sent as two commands. + cmd_array[0] = PAM_PAGE_ADDR | start_page; + cmd_array[1] = PAM_SETCOLUMN_LSB | ((OLED_COLUMN_OFFSET + start_column) & 0x0f); + cmd_array[2] = PAM_SETCOLUMN_MSB | ((OLED_COLUMN_OFFSET + start_column) >> 4 & 0x0f); + cmd_array[3] = NOP; + cmd_array[4] = NOP; + cmd_array[5] = NOP; +#else + // Commands for use in Horizontal Addressing mode. + cmd_array[1] = start_column; + cmd_array[4] = start_page; + cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) % OLED_DISPLAY_WIDTH + cmd_array[1]; + cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_WIDTH - 1) / OLED_DISPLAY_WIDTH - 1; +#endif +} + +static void calc_bounds_90(uint8_t update_start, uint8_t *cmd_array) { + cmd_array[1] = OLED_BLOCK_SIZE * update_start / OLED_DISPLAY_HEIGHT * 8; + cmd_array[4] = OLED_BLOCK_SIZE * update_start % OLED_DISPLAY_HEIGHT; + cmd_array[2] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) / OLED_DISPLAY_HEIGHT * 8 - 1 + cmd_array[1]; + ; + cmd_array[5] = (OLED_BLOCK_SIZE + OLED_DISPLAY_HEIGHT - 1) % OLED_DISPLAY_HEIGHT / 8; +} + +uint8_t crot(uint8_t a, int8_t n) { + const uint8_t mask = 0x7; + n &= mask; + return a << n | a >> (-n & mask); +} + +static void rotate_90(const uint8_t *src, uint8_t *dest) { + for (uint8_t i = 0, shift = 7; i < 8; ++i, --shift) { + uint8_t selector = (1 << i); + for (uint8_t j = 0; j < 8; ++j) { + dest[i] |= crot(src[j] & selector, shift - (int8_t)j); + } + } +} + +void oled_render(void) { + if (!oled_initialized) { + return; + } + + // Do we have work to do? + oled_dirty &= OLED_ALL_BLOCKS_MASK; + if (!oled_dirty || oled_scrolling) { + return; + } + + // Find first dirty block + uint8_t update_start = 0; + while (!(oled_dirty & ((OLED_BLOCK_TYPE)1 << update_start))) { + ++update_start; + } + + // Set column & page position + static uint8_t display_start[] = {COLUMN_ADDR, 0, OLED_DISPLAY_WIDTH - 1, PAGE_ADDR, 0, OLED_DISPLAY_HEIGHT / 8 - 1}; + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + calc_bounds(update_start, display_start); + } else { + calc_bounds_90(update_start, display_start); + } + + // Send column & page position + if (!oled_cmd(display_start, ARRAY_SIZE(display_start))) { + print("oled_render offset command failed\n"); + return; + } + + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + // Send render data chunk as is + if (!oled_write_reg(&oled_buffer[OLED_BLOCK_SIZE * update_start], OLED_BLOCK_SIZE)) { + print("oled_render data failed\n"); + return; + } + } else { + // Rotate the render chunks + const static uint8_t source_map[] = OLED_SOURCE_MAP; + const static uint8_t target_map[] = OLED_TARGET_MAP; + + static uint8_t temp_buffer[OLED_BLOCK_SIZE]; + memset(temp_buffer, 0, sizeof(temp_buffer)); + for (uint8_t i = 0; i < sizeof(source_map); ++i) { + rotate_90(&oled_buffer[OLED_BLOCK_SIZE * update_start + source_map[i]], &temp_buffer[target_map[i]]); + } + + // Send render data chunk after rotating + if (!oled_write_reg(temp_buffer, OLED_BLOCK_SIZE)) { + print("oled_render90 data failed\n"); + return; + } + } + + // Turn on display if it is off + oled_on(); + + // Clear dirty flag + oled_dirty &= ~((OLED_BLOCK_TYPE)1 << update_start); +} + +void oled_set_cursor(uint8_t col, uint8_t line) { + uint16_t index = line * oled_rotation_width + col * OLED_FONT_WIDTH; + + // Out of bounds? + if (index >= OLED_MATRIX_SIZE) { + index = 0; + } + + oled_cursor = &oled_buffer[index]; +} + +void oled_advance_page(bool clearPageRemainder) { + uint16_t index = oled_cursor - &oled_buffer[0]; + uint8_t remaining = oled_rotation_width - (index % oled_rotation_width); + + if (clearPageRemainder) { + // Remaining Char count + remaining = remaining / OLED_FONT_WIDTH; + + // Write empty character until next line + while (remaining--) + oled_write_char(' ', false); + } else { + // Next page index out of bounds? + if (index + remaining >= OLED_MATRIX_SIZE) { + index = 0; + remaining = 0; + } + + oled_cursor = &oled_buffer[index + remaining]; + } +} + +void oled_advance_char(void) { + uint16_t nextIndex = oled_cursor - &oled_buffer[0] + OLED_FONT_WIDTH; + uint8_t remainingSpace = oled_rotation_width - (nextIndex % oled_rotation_width); + + // Do we have enough space on the current line for the next character + if (remainingSpace < OLED_FONT_WIDTH) { + nextIndex += remainingSpace; + } + + // Did we go out of bounds + if (nextIndex >= OLED_MATRIX_SIZE) { + nextIndex = 0; + } + + // Update cursor position + oled_cursor = &oled_buffer[nextIndex]; +} + +// Main handler that writes character data to the display buffer +void oled_write_char(const char data, bool invert) { + // Advance to the next line if newline + if (data == '\n') { + // Old source wrote ' ' until end of line... + oled_advance_page(true); + return; + } + + if (data == '\r') { + oled_advance_page(false); + return; + } + + // copy the current render buffer to check for dirty after + static uint8_t oled_temp_buffer[OLED_FONT_WIDTH]; + memcpy(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH); + + _Static_assert(sizeof(font) >= ((OLED_FONT_END + 1 - OLED_FONT_START) * OLED_FONT_WIDTH), "OLED_FONT_END references outside array"); + + // set the reder buffer data + uint8_t cast_data = (uint8_t)data; // font based on unsigned type for index + if (cast_data < OLED_FONT_START || cast_data > OLED_FONT_END) { + memset(oled_cursor, 0x00, OLED_FONT_WIDTH); + } else { + const uint8_t *glyph = &font[(cast_data - OLED_FONT_START) * OLED_FONT_WIDTH]; + memcpy_P(oled_cursor, glyph, OLED_FONT_WIDTH); + } + + // Invert if needed + if (invert) { + InvertCharacter(oled_cursor); + } + + // Dirty check + if (memcmp(&oled_temp_buffer, oled_cursor, OLED_FONT_WIDTH)) { + uint16_t index = oled_cursor - &oled_buffer[0]; + oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE)); + // Edgecase check if the written data spans the 2 chunks + oled_dirty |= ((OLED_BLOCK_TYPE)1 << ((index + OLED_FONT_WIDTH - 1) / OLED_BLOCK_SIZE)); + } + + // Finally move to the next char + oled_advance_char(); +} + +void oled_write(const char *data, bool invert) { + const char *end = data + strlen(data); + while (data < end) { + oled_write_char(*data, invert); + data++; + } +} + +void oled_write_ln(const char *data, bool invert) { + oled_write(data, invert); + oled_advance_page(true); +} + +void oled_pan(bool left) { + uint16_t i = 0; + for (uint16_t y = 0; y < OLED_DISPLAY_HEIGHT / 8; y++) { + if (left) { + for (uint16_t x = 0; x < OLED_DISPLAY_WIDTH - 1; x++) { + i = y * OLED_DISPLAY_WIDTH + x; + oled_buffer[i] = oled_buffer[i + 1]; + } + } else { + for (uint16_t x = OLED_DISPLAY_WIDTH - 1; x > 0; x--) { + i = y * OLED_DISPLAY_WIDTH + x; + oled_buffer[i] = oled_buffer[i - 1]; + } + } + } + oled_dirty = OLED_ALL_BLOCKS_MASK; +} + +oled_buffer_reader_t oled_read_raw(uint16_t start_index) { + if (start_index > OLED_MATRIX_SIZE) start_index = OLED_MATRIX_SIZE; + oled_buffer_reader_t ret_reader; + ret_reader.current_element = &oled_buffer[start_index]; + ret_reader.remaining_element_count = OLED_MATRIX_SIZE - start_index; + return ret_reader; +} + +void oled_write_raw_byte(const char data, uint16_t index) { + if (index > OLED_MATRIX_SIZE) index = OLED_MATRIX_SIZE; + if (oled_buffer[index] == data) return; + oled_buffer[index] = data; + oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE)); +} + +void oled_write_raw(const char *data, uint16_t size) { + uint16_t cursor_start_index = oled_cursor - &oled_buffer[0]; + if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index; + for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) { + uint8_t c = *data++; + if (oled_buffer[i] == c) continue; + oled_buffer[i] = c; + oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE)); + } +} + +void oled_write_pixel(uint8_t x, uint8_t y, bool on) { + if (x >= oled_rotation_width) { + return; + } + uint16_t index = x + (y / 8) * oled_rotation_width; + if (index >= OLED_MATRIX_SIZE) { + return; + } + uint8_t data = oled_buffer[index]; + if (on) { + data |= (1 << (y % 8)); + } else { + data &= ~(1 << (y % 8)); + } + if (oled_buffer[index] != data) { + oled_buffer[index] = data; + oled_dirty |= ((OLED_BLOCK_TYPE)1 << (index / OLED_BLOCK_SIZE)); + } +} + +#if defined(__AVR__) +void oled_write_P(const char *data, bool invert) { + uint8_t c = pgm_read_byte(data); + while (c != 0) { + oled_write_char(c, invert); + c = pgm_read_byte(++data); + } +} + +void oled_write_ln_P(const char *data, bool invert) { + oled_write_P(data, invert); + oled_advance_page(true); +} + +void oled_write_raw_P(const char *data, uint16_t size) { + uint16_t cursor_start_index = oled_cursor - &oled_buffer[0]; + if ((size + cursor_start_index) > OLED_MATRIX_SIZE) size = OLED_MATRIX_SIZE - cursor_start_index; + for (uint16_t i = cursor_start_index; i < cursor_start_index + size; i++) { + uint8_t c = pgm_read_byte(data++); + if (oled_buffer[i] == c) continue; + oled_buffer[i] = c; + oled_dirty |= ((OLED_BLOCK_TYPE)1 << (i / OLED_BLOCK_SIZE)); + } +} +#endif // defined(__AVR__) + +bool oled_on(void) { + if (!oled_initialized) { + return oled_active; + } + +#if OLED_TIMEOUT > 0 + oled_timeout = timer_read32() + OLED_TIMEOUT; +#endif + + static const uint8_t PROGMEM display_on[] = +#ifdef OLED_FADE_OUT + {FADE_BLINK, 0x00}; +#else + {DISPLAY_ON}; +#endif + + if (!oled_active) { + if (!oled_cmd_p(display_on, ARRAY_SIZE(display_on))) { + print("oled_on cmd failed\n"); + return oled_active; + } + oled_active = true; + } + return oled_active; +} + +bool oled_off(void) { + if (!oled_initialized) { + return !oled_active; + } + + static const uint8_t PROGMEM display_off[] = +#ifdef OLED_FADE_OUT + {FADE_BLINK, ENABLE_FADE | OLED_FADE_OUT_INTERVAL}; +#else + {DISPLAY_OFF}; +#endif + + if (oled_active) { + if (!oled_cmd_p(display_off, ARRAY_SIZE(display_off))) { + print("oled_off cmd failed\n"); + return oled_active; + } + oled_active = false; + } + return !oled_active; +} + +bool is_oled_on(void) { + return oled_active; +} + +uint8_t oled_set_brightness(uint8_t level) { + if (!oled_initialized) { + return oled_brightness; + } + + uint8_t set_contrast[] = { CONTRAST, level}; + if (oled_brightness != level) { + if (!oled_cmd(set_contrast, ARRAY_SIZE(set_contrast))) { + print("set_brightness cmd failed\n"); + return oled_brightness; + } + oled_brightness = level; + } + return oled_brightness; +} + +uint8_t oled_get_brightness(void) { + return oled_brightness; +} + +// Set the specific 8 lines rows of the screen to scroll. +// 0 is the default for start, and 7 for end, which is the entire +// height of the screen. For 128x32 screens, rows 4-7 are not used. +void oled_scroll_set_area(uint8_t start_line, uint8_t end_line) { + oled_scroll_start = start_line; + oled_scroll_end = end_line; +} + +void oled_scroll_set_speed(uint8_t speed) { + // Sets the speed for scrolling... does not take effect + // until scrolling is either started or restarted + // the ssd1306 supports 8 speeds + // FrameRate2 speed = 7 + // FrameRate3 speed = 4 + // FrameRate4 speed = 5 + // FrameRate5 speed = 0 + // FrameRate25 speed = 6 + // FrameRate64 speed = 1 + // FrameRate128 speed = 2 + // FrameRate256 speed = 3 + // for ease of use these are remaped here to be in order + static const uint8_t scroll_remap[8] = {7, 4, 5, 0, 6, 1, 2, 3}; + oled_scroll_speed = scroll_remap[speed]; +} + +bool oled_scroll_right(void) { + if (!oled_initialized) { + return oled_scrolling; + } + + // Dont enable scrolling if we need to update the display + // This prevents scrolling of bad data from starting the scroll too early after init + if (!oled_dirty && !oled_scrolling) { + uint8_t display_scroll_right[] = {SCROLL_RIGHT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL}; + if (!oled_cmd(display_scroll_right, ARRAY_SIZE(display_scroll_right))) { + print("oled_scroll_right cmd failed\n"); + return oled_scrolling; + } + oled_scrolling = true; + } + return oled_scrolling; +} + +bool oled_scroll_left(void) { + if (!oled_initialized) { + return oled_scrolling; + } + + // Dont enable scrolling if we need to update the display + // This prevents scrolling of bad data from starting the scroll too early after init + if (!oled_dirty && !oled_scrolling) { + uint8_t display_scroll_left[] = {SCROLL_LEFT, 0x00, oled_scroll_start, oled_scroll_speed, oled_scroll_end, 0x00, 0xFF, ACTIVATE_SCROLL}; + if (!oled_cmd(display_scroll_left, ARRAY_SIZE(display_scroll_left))) { + print("oled_scroll_left cmd failed\n"); + return oled_scrolling; + } + oled_scrolling = true; + } + return oled_scrolling; +} + +bool oled_scroll_off(void) { + if (!oled_initialized) { + return !oled_scrolling; + } + + if (oled_scrolling) { + static const uint8_t PROGMEM display_scroll_off[] = {DEACTIVATE_SCROLL}; + if (!oled_cmd_p(display_scroll_off, ARRAY_SIZE(display_scroll_off))) { + print("oled_scroll_off cmd failed\n"); + return oled_scrolling; + } + oled_scrolling = false; + oled_dirty = OLED_ALL_BLOCKS_MASK; + } + return !oled_scrolling; +} + +bool is_oled_scrolling(void) { + return oled_scrolling; +} + +bool oled_invert(bool invert) { + if (!oled_initialized) { + return oled_inverted; + } + + if (invert && !oled_inverted) { + static const uint8_t PROGMEM display_inverted[] = {INVERT_DISPLAY}; + if (!oled_cmd_p(display_inverted, ARRAY_SIZE(display_inverted))) { + print("oled_invert cmd failed\n"); + return oled_inverted; + } + oled_inverted = true; + } else if (!invert && oled_inverted) { + static const uint8_t PROGMEM display_normal[] = {NORMAL_DISPLAY}; + if (!oled_cmd_p(display_normal, ARRAY_SIZE(display_normal))) { + print("oled_invert cmd failed\n"); + return oled_inverted; + } + oled_inverted = false; + } + + return oled_inverted; +} + +uint8_t oled_max_chars(void) { + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + return OLED_DISPLAY_WIDTH / OLED_FONT_WIDTH; + } + return OLED_DISPLAY_HEIGHT / OLED_FONT_WIDTH; +} + +uint8_t oled_max_lines(void) { + if (!HAS_FLAGS(oled_rotation, OLED_ROTATION_90)) { + return OLED_DISPLAY_HEIGHT / OLED_FONT_HEIGHT; + } + return OLED_DISPLAY_WIDTH / OLED_FONT_HEIGHT; +} + +void oled_task(void) { + if (!oled_initialized) { + return; + } + +#if OLED_UPDATE_INTERVAL > 0 + if (timer_elapsed(oled_update_timeout) >= OLED_UPDATE_INTERVAL) { + oled_update_timeout = timer_read(); + oled_set_cursor(0, 0); + oled_task_kb(); + } +#else + oled_set_cursor(0, 0); + oled_task_kb(); +#endif + +#if OLED_SCROLL_TIMEOUT > 0 + if (oled_dirty && oled_scrolling) { + oled_scroll_timeout = timer_read32() + OLED_SCROLL_TIMEOUT; + oled_scroll_off(); + } +#endif + + // Smart render system, no need to check for dirty + oled_render(); + + // Display timeout check +#if OLED_TIMEOUT > 0 + if (oled_active && timer_expired32(timer_read32(), oled_timeout)) { + oled_off(); + } +#endif + +#if OLED_SCROLL_TIMEOUT > 0 + if (!oled_scrolling && timer_expired32(timer_read32(), oled_scroll_timeout)) { +# ifdef OLED_SCROLL_TIMEOUT_RIGHT + oled_scroll_right(); +# else + oled_scroll_left(); +# endif + } +#endif +} + +__attribute__((weak)) bool oled_task_kb(void) { + return oled_task_user(); +} +__attribute__((weak)) bool oled_task_user(void) { + return true; +} diff --git a/keyboards/adafruit/macropad/macropad.c b/keyboards/adafruit/macropad/macropad.c new file mode 100644 index 0000000000..a82a2dabb1 --- /dev/null +++ b/keyboards/adafruit/macropad/macropad.c @@ -0,0 +1,56 @@ +/* Copyright 2022 Jose Pablo Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#include "macropad.h" + +#ifdef RGB_MATRIX_ENABLE + +#define NA NO_LED + +/* RGB Positioning */ +led_config_t g_led_config = { { + { NA, NA, NA }, + { 0, 1, 2 }, + { 3, 4, 5 }, + { 6, 7, 8 }, + { 9, 10, 11 } +}, { + { 0, 0 }, { 112, 0 }, { 224, 0}, + { 0, 21 }, { 112, 21 }, { 224, 21}, + { 0, 42 }, { 112, 42 }, { 224, 42}, + { 0, 64 }, { 112, 64 }, { 224, 64} +}, { + 4, 4, 4, + 4, 4, 4, + 4, 4, 4, + 4, 4, 4 +} }; + +#endif + +#ifdef ENCODER_ENABLE +bool encoder_update_kb(uint8_t index, bool clockwise) { + if (!encoder_update_user(index, clockwise)) { return false; } + if (index == 0) { + if (clockwise) { + tap_code_delay(KC_VOLU, 10); + } else { + tap_code_delay(KC_VOLD, 10); + } + } + return true; +} +#endif diff --git a/keyboards/adafruit/macropad/macropad.h b/keyboards/adafruit/macropad/macropad.h new file mode 100644 index 0000000000..6e2e3524b7 --- /dev/null +++ b/keyboards/adafruit/macropad/macropad.h @@ -0,0 +1,38 @@ +/* Copyright 2022 Jose Pablo Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include "quantum.h" + +#define ___ KC_NO + +// clang-format off + #define LAYOUT( \ + K02, \ + K10, K11, K12, \ + K20, K21, K22, \ + K30, K31, K32, \ + K40, K41, K42 \ + ) \ + { \ + { ___, ___, K02 }, \ + { K10, K11, K12 }, \ + { K20, K21, K22 }, \ + { K30, K31, K32 }, \ + { K40, K41, K42 } \ + } +// clang-format on diff --git a/keyboards/adafruit/macropad/mcuconf.h b/keyboards/adafruit/macropad/mcuconf.h new file mode 100644 index 0000000000..198a2eea69 --- /dev/null +++ b/keyboards/adafruit/macropad/mcuconf.h @@ -0,0 +1,22 @@ +/* Copyright 2022 Jose Pablo Ramirez + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + */ + +#pragma once + +#include_next + +#undef RP_SPI_USE_SPI1 +#define RP_SPI_USE_SPI1 TRUE diff --git a/keyboards/adafruit/macropad/readme.md b/keyboards/adafruit/macropad/readme.md new file mode 100644 index 0000000000..fe7375b336 --- /dev/null +++ b/keyboards/adafruit/macropad/readme.md @@ -0,0 +1,37 @@ +# Adafruit MacroPad RP2040 + +![AdafruitMacropad](https://i.imgur.com/dSBSwcJh.jpeg) + +A RP2040-powered Macropad with a 3x4 layout. + +- Keyboard Maintainer: [Jpe230](https://github.com/jpe230/) +- Hardware Supported: Adafruit MacroPad RP2040 +- Hardware Availability: [Barebones kit](https://www.adafruit.com/product/5100) [Starter Kit](https://www.adafruit.com/product/5128) + +Make example for this board (after setting up your build environment): + +```sh +qmk compile -kb adafruit/macropad -km default +``` + +See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs). + +## Features + +- Raspberry Pi RP2040 Chip + 8MB Flash memory - Dual-core Cortex M0+ at ~130MHz with 264KB of RAM. +- 3x4 Mechanical key switch sockets - accepts any Cherry MX-compatible switches. Individually tied to GPIO pins (not matrix wired) +- One NeoPixel RGB LED per switch, on north side. +- Rotary encoder, 20 detents per rotation, with push-switch on GPIO pin. Push switch is also used for entering bootloader mode when held down on power-up or reset. +- 128x64 SH1106 Monochrome OLED display - On high-speed hardware SPI port for quick updates. +- 8mm Speaker/Buzzer - With Class D amplifier and RC filter, can be used to make simple beeps and sounds effects. (Unsupported for now) +- STEMMA QT Connector - Allows adding any I2C sensors/displays/devices with plug-and-play cables. +- Reset button - On the side, for quick restarting, press it twice to enter bootloader. +- Four M3 mounting bosses - Make custom enclosures easily. + +## Bootloader + +Enter the bootloader in 3 ways: + +* **Bootmagic reset**: Hold down the rotary encoder push-button on power-up or reset. +* **Physical reset button**: Press twice the button on the side while the board is connected. +* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available. diff --git a/keyboards/adafruit/macropad/rules.mk b/keyboards/adafruit/macropad/rules.mk new file mode 100644 index 0000000000..3636424a71 --- /dev/null +++ b/keyboards/adafruit/macropad/rules.mk @@ -0,0 +1,26 @@ +# MCU name +MCU = RP2040 +# Bootloader selection +BOOTLOADER = rp2040 +# Build Options +# change yes to no to disable +# +BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite +MOUSEKEY_ENABLE = no # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = no # Console for debug +COMMAND_ENABLE = no # Commands for debug and configuration +NKRO_ENABLE = yes # Enable N-Key Rollover +BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality +RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow +AUDIO_ENABLE = no # Audio output +# AUDIO_DRIVER = pwm_software +ENCODER_ENABLE = yes +RGB_MATRIX_ENABLE = yes +RGB_MATRIX_DRIVER = WS2812 +WS2812_DRIVER = vendor +OLED_ENABLE = yes +OLED_DRIVER = custom +# Project specific files +SRC += lib/ssd1306_sh1106.c +QUANTUM_LIB_SRC += spi_master.c