Clean up some user keymaps specifying MCU (#11966)
Ryan
GitHub
parent
c1e6febef7
commit
316dcf4960
|
|
@ -15,65 +15,8 @@ You should have received a copy of the GNU General Public License
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef INFINITY_ERGODOX_CONFIG_H
|
#pragma once
|
||||||
#define INFINITY_ERGODOX_CONFIG_H
|
|
||||||
|
|
||||||
|
|
||||||
/* USB Device descriptor parameter */
|
|
||||||
#define VENDOR_ID 0xFEED
|
|
||||||
#define PRODUCT_ID 0x6464
|
|
||||||
#define DEVICE_VER 0x0001
|
|
||||||
/* in python2: list(u"whatever".encode('utf-16-le')) */
|
|
||||||
/* at most 32 characters or the ugly hack in usb_main.c borks */
|
|
||||||
#define MANUFACTURER "QMK"
|
|
||||||
#define PRODUCT "Infinity keyboard/QMK"
|
|
||||||
|
|
||||||
#define MOUSEKEY_INTERVAL 20
|
|
||||||
#define MOUSEKEY_DELAY 0
|
|
||||||
#define MOUSEKEY_TIME_TO_MAX 60
|
|
||||||
#define MOUSEKEY_MAX_SPEED 7
|
|
||||||
#define MOUSEKEY_WHEEL_DELAY 0
|
|
||||||
|
|
||||||
#define TAPPING_TOGGLE 1
|
|
||||||
|
|
||||||
/* define if matrix has ghost */
|
|
||||||
//#define MATRIX_HAS_GHOST
|
|
||||||
|
|
||||||
#define TAPPING_TERM 200
|
|
||||||
#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
|
|
||||||
|
|
||||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
||||||
#define LOCKING_SUPPORT_ENABLE
|
|
||||||
/* Locking resynchronize hack */
|
|
||||||
#define LOCKING_RESYNC_ENABLE
|
|
||||||
|
|
||||||
/* key combination for command */
|
|
||||||
#define IS_COMMAND() ( \
|
|
||||||
get_mods() == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
|
|
||||||
get_mods() == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
|
|
||||||
)
|
|
||||||
|
|
||||||
/* key matrix size */
|
|
||||||
#define MATRIX_ROWS 18
|
|
||||||
#define MATRIX_COLS 5
|
|
||||||
#define LOCAL_MATRIX_ROWS 9
|
|
||||||
|
|
||||||
/* number of backlight levels */
|
|
||||||
#define BACKLIGHT_LEVELS 3
|
|
||||||
|
|
||||||
#define LED_BRIGHTNESS_LO 100
|
|
||||||
#define LED_BRIGHTNESS_HI 255
|
|
||||||
|
|
||||||
/* define if matrix has ghost */
|
|
||||||
//#define MATRIX_HAS_GHOST
|
|
||||||
|
|
||||||
/* Set 0 if debouncing isn't needed */
|
|
||||||
#define DEBOUNCE 5
|
|
||||||
|
|
||||||
#define SERIAL_LINK_BAUD 562500
|
|
||||||
#define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
|
|
||||||
|
|
||||||
#define VISUALIZER_USER_DATA_SIZE 16
|
|
||||||
/*
|
/*
|
||||||
* music mode options
|
* music mode options
|
||||||
* midi enabled
|
* midi enabled
|
||||||
|
|
@ -82,22 +25,3 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*
|
*
|
||||||
*/
|
*/
|
||||||
#define MUSIC_MASK keycode != KC_NO
|
#define MUSIC_MASK keycode != KC_NO
|
||||||
/*
|
|
||||||
* Feature disable options
|
|
||||||
* These options are also useful to firmware size reduction.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* disable debug print */
|
|
||||||
//#define NO_DEBUG
|
|
||||||
|
|
||||||
/* disable print */
|
|
||||||
//#define NO_PRINT
|
|
||||||
|
|
||||||
/* disable action features */
|
|
||||||
//#define NO_ACTION_LAYER
|
|
||||||
//#define NO_ACTION_TAPPING
|
|
||||||
//#define NO_ACTION_ONESHOT
|
|
||||||
//#define NO_ACTION_MACRO
|
|
||||||
//#define NO_ACTION_FUNCTION
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
|
||||||
|
|
@ -1,93 +1,4 @@
|
||||||
# project specific files
|
STENO_ENABLE = yes
|
||||||
SRC = matrix.c \
|
|
||||||
led.c
|
|
||||||
|
|
||||||
## chip/board settings
|
|
||||||
# - the next two should match the directories in
|
|
||||||
# <chibios>/os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES)
|
|
||||||
# - For Teensies, FAMILY = KINETIS and SERIES is either
|
|
||||||
# KL2x (LC) or K20x (3.0,3.1,3.2).
|
|
||||||
# - For Infinity KB, SERIES = K20x
|
|
||||||
MCU_FAMILY = KINETIS
|
|
||||||
MCU_SERIES = K20x
|
|
||||||
|
|
||||||
# Linker script to use
|
|
||||||
# - it should exist either in <chibios>/os/common/ports/ARMCMx/compilers/GCC/ld/
|
|
||||||
# or <this_dir>/ld/
|
|
||||||
# - NOTE: a custom ld script is needed for EEPROM on Teensy LC
|
|
||||||
# - LDSCRIPT =
|
|
||||||
# - MKL26Z64 for Teensy LC
|
|
||||||
# - MK20DX128 for Teensy 3.0
|
|
||||||
# - MK20DX256 for Teensy 3.1 and 3.2
|
|
||||||
# - MK20DX128BLDR4 for Infinity 60% with Kiibohd bootloader
|
|
||||||
# - MK20DX256BLDR8 for Infinity ErgoDox with Kiibohd bootloader
|
|
||||||
MCU_LDSCRIPT = MK20DX256BLDR8
|
|
||||||
|
|
||||||
# Startup code to use
|
|
||||||
# - it should exist in <chibios>/os/common/ports/ARMCMx/compilers/GCC/mk/
|
|
||||||
# - STARTUP =
|
|
||||||
# - kl2x for Teensy LC
|
|
||||||
# - k20x5 for Teensy 3.0 and Infinity 60%
|
|
||||||
# - k20x7 for Teensy 3.1, 3.2 and Infinity ErgoDox
|
|
||||||
MCU_STARTUP = k20x7
|
|
||||||
|
|
||||||
# Board: it should exist either in <chibios>/os/hal/boards/
|
|
||||||
# or <this_dir>/boards
|
|
||||||
# - BOARD =
|
|
||||||
# - PJRC_TEENSY_LC for Teensy LC
|
|
||||||
# - PJRC_TEENSY_3 for Teensy 3.0
|
|
||||||
# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2
|
|
||||||
# - MCHCK_K20 for Infinity KB
|
|
||||||
#BOARD = MCHCK_K20
|
|
||||||
BOARD = PJRC_TEENSY_3_1
|
|
||||||
|
|
||||||
# Cortex version
|
|
||||||
# Teensy LC is cortex-m0; Teensy 3.x are cortex-m4
|
|
||||||
MCU = cortex-m4
|
|
||||||
|
|
||||||
# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7
|
|
||||||
# I.e. 6 for Teensy LC; 7 for Teensy 3.x
|
|
||||||
ARMV = 7
|
|
||||||
|
|
||||||
# Vector table for application
|
|
||||||
# 0x00000000-0x00001000 area is occupied by bootlaoder.*/
|
|
||||||
# The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
|
|
||||||
OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
|
|
||||||
|
|
||||||
BOOTLOADER = dfu
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
|
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
CUSTOM_MATRIX = yes # Custom matrix file for the ErgoDox EZ
|
|
||||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
UNICODE_ENABLE = yes # Unicode
|
|
||||||
SWAP_HANDS_ENABLE = yes # Allow swapping hands of keyboard
|
|
||||||
STENO_ENABLE = yes #enable plover steno mode
|
|
||||||
CUSTOM_MATRIX = yes # Custom matrix file
|
|
||||||
SERIAL_LINK_ENABLE = yes
|
|
||||||
VISUALIZER_ENABLE = yes
|
|
||||||
LCD_ENABLE = yes
|
|
||||||
BACKLIGHT_ENABLE = yes
|
|
||||||
LCD_BACKLIGHT_ENABLE = yes
|
|
||||||
MIDI_ENABLE = yes
|
MIDI_ENABLE = yes
|
||||||
MIDI_ADVANCED = yes
|
MIDI_ADVANCED = yes
|
||||||
MUSIC_MODE = yes
|
MUSIC_MODE = yes
|
||||||
RGBLIGHT_ENABLE = no
|
|
||||||
|
|
||||||
LCD_DRIVER = st7565
|
|
||||||
LCD_WIDTH = 128
|
|
||||||
LCD_HEIGHT = 32
|
|
||||||
|
|
||||||
LED_DRIVER = is31fl3731c
|
|
||||||
LED_WIDTH = 7
|
|
||||||
LED_HEIGHT = 7
|
|
||||||
|
|
||||||
LAYOUTS = ergodox
|
|
||||||
|
|
|
||||||
|
|
@ -1,64 +0,0 @@
|
||||||
# MCU name
|
|
||||||
MCU = atmega32u4
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard underlight functionality (+4870)
|
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality (+1150)
|
|
||||||
MIDI_ENABLE = no # MIDI controls
|
|
||||||
AUDIO_ENABLE = no
|
|
||||||
UNICODE_ENABLE = no # Unicode
|
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
|
|
@ -1,68 +1 @@
|
||||||
# MCU name
|
KEY_LOCK_ENABLE = yes
|
||||||
MCU = atmega32u4
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
# CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
||||||
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
|
||||||
# MIDI_ENABLE = YES # MIDI controls
|
|
||||||
# UNICODE_ENABLE = YES # Unicode
|
|
||||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
KEY_LOCK_ENABLE = yes # KC_LOCK
|
|
||||||
|
|
||||||
LAYOUTS = 60_ansi 60_iso 60_ansi_split_bs_rshift
|
|
||||||
|
|
|
||||||
|
|
@ -15,160 +15,11 @@ You should have received a copy of the GNU General Public License
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef CONFIG_USER_H
|
#pragma once
|
||||||
#define CONFIG_USER_H
|
|
||||||
|
|
||||||
#include "config_common.h"
|
|
||||||
|
|
||||||
/* USB Device descriptor parameter */
|
|
||||||
#define VENDOR_ID 0xFEED
|
|
||||||
#define PRODUCT_ID 0x6060
|
|
||||||
#define DEVICE_VER 0x0001
|
|
||||||
#define MANUFACTURER geekhack
|
|
||||||
#define PRODUCT GH60
|
|
||||||
|
|
||||||
/* key matrix size */
|
|
||||||
#define MATRIX_ROWS 5
|
|
||||||
#define MATRIX_COLS 14
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Keyboard Matrix Assignments
|
|
||||||
*
|
|
||||||
* Change this to how you wired your keyboard
|
|
||||||
* COLS: AVR pins used for columns, left to right
|
|
||||||
* ROWS: AVR pins used for rows, top to bottom
|
|
||||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
||||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
|
|
||||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
|
|
||||||
#define UNUSED_PINS
|
|
||||||
|
|
||||||
/* COL2ROW or ROW2COL */
|
|
||||||
#define DIODE_DIRECTION COL2ROW
|
|
||||||
|
|
||||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
||||||
#define DEBOUNCE 5
|
|
||||||
|
|
||||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
|
||||||
//#define MATRIX_HAS_GHOST
|
|
||||||
|
|
||||||
/* number of backlight levels */
|
|
||||||
#define BACKLIGHT_LEVELS 3
|
|
||||||
|
|
||||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
||||||
#define LOCKING_SUPPORT_ENABLE
|
|
||||||
/* Locking resynchronize hack */
|
|
||||||
#define LOCKING_RESYNC_ENABLE
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Force NKRO
|
|
||||||
*
|
|
||||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
||||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
||||||
* makefile for this to work.)
|
|
||||||
*
|
|
||||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
||||||
* until the next keyboard reset.
|
|
||||||
*
|
|
||||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
||||||
* fully operational during normal computer usage.
|
|
||||||
*
|
|
||||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
||||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
||||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
||||||
* power-up.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
//#define FORCE_NKRO
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Magic Key Options
|
|
||||||
*
|
|
||||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
|
||||||
* the keyboard. They are best used in combination with the HID Listen program,
|
|
||||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
|
||||||
*
|
|
||||||
* The options below allow the magic key functionality to be changed. This is
|
|
||||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* control how magic key switches layers */
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
|
||||||
|
|
||||||
/* override magic key keymap */
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
|
||||||
//#define MAGIC_KEY_HELP1 H
|
|
||||||
//#define MAGIC_KEY_HELP2 SLASH
|
|
||||||
//#define MAGIC_KEY_DEBUG D
|
|
||||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
|
||||||
//#define MAGIC_KEY_DEBUG_KBD K
|
|
||||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
|
||||||
//#define MAGIC_KEY_VERSION V
|
|
||||||
//#define MAGIC_KEY_STATUS S
|
|
||||||
//#define MAGIC_KEY_CONSOLE C
|
|
||||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
|
||||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
|
||||||
//#define MAGIC_KEY_LAYER0 0
|
|
||||||
//#define MAGIC_KEY_LAYER1 1
|
|
||||||
//#define MAGIC_KEY_LAYER2 2
|
|
||||||
//#define MAGIC_KEY_LAYER3 3
|
|
||||||
//#define MAGIC_KEY_LAYER4 4
|
|
||||||
//#define MAGIC_KEY_LAYER5 5
|
|
||||||
//#define MAGIC_KEY_LAYER6 6
|
|
||||||
//#define MAGIC_KEY_LAYER7 7
|
|
||||||
//#define MAGIC_KEY_LAYER8 8
|
|
||||||
//#define MAGIC_KEY_LAYER9 9
|
|
||||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
|
||||||
//#define MAGIC_KEY_LOCK CAPS
|
|
||||||
//#define MAGIC_KEY_EEPROM E
|
|
||||||
//#define MAGIC_KEY_NKRO N
|
|
||||||
//#define MAGIC_KEY_SLEEP_LED Z
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Feature disable options
|
|
||||||
* These options are also useful to firmware size reduction.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* disable debug print */
|
|
||||||
//#define NO_DEBUG
|
|
||||||
|
|
||||||
/* disable print */
|
|
||||||
//#define NO_PRINT
|
|
||||||
|
|
||||||
/* disable action features */
|
|
||||||
//#define NO_ACTION_LAYER
|
|
||||||
//#define NO_ACTION_TAPPING
|
|
||||||
//#define NO_ACTION_ONESHOT
|
|
||||||
//#define NO_ACTION_MACRO
|
|
||||||
//#define NO_ACTION_FUNCTION
|
|
||||||
|
|
||||||
/*
|
|
||||||
* RGB Underglow
|
|
||||||
* These settings are for the F4 by default:
|
|
||||||
*
|
|
||||||
*
|
|
||||||
* #define ws2812_pin PF4
|
|
||||||
* #define RGBLED_NUM 14 // Number of LEDs
|
|
||||||
* #define RGBLIGHT_HUE_STEP 10
|
|
||||||
* #define RGBLIGHT_SAT_STEP 17
|
|
||||||
* #define RGBLIGHT_VAL_STEP 17
|
|
||||||
*
|
|
||||||
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
|
|
||||||
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
|
|
||||||
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define RGB_DI_PIN F4
|
#define RGB_DI_PIN F4
|
||||||
|
#define RGBLED_NUM 11
|
||||||
#define RGBLIGHT_ANIMATIONS
|
#define RGBLIGHT_ANIMATIONS
|
||||||
#define RGBLED_NUM 11 // Number of LEDs
|
|
||||||
#define RGBLIGHT_HUE_STEP 8
|
#define RGBLIGHT_HUE_STEP 8
|
||||||
#define RGBLIGHT_SAT_STEP 8
|
#define RGBLIGHT_SAT_STEP 8
|
||||||
#define RGBLIGHT_VAL_STEP 8
|
#define RGBLIGHT_VAL_STEP 8
|
||||||
#endif
|
|
||||||
|
|
|
||||||
|
|
@ -1,107 +1,2 @@
|
||||||
#----------------------------------------------------------------------------
|
SLEEP_LED_ENABLE = yes
|
||||||
# On command line:
|
RGBLIGHT_ENABLE = yes
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
|
||||||
MCU = atmega32u4
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
# CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
||||||
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
|
||||||
# MIDI_ENABLE = YES # MIDI controls
|
|
||||||
# UNICODE_ENABLE = YES # Unicode
|
|
||||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
RGBLIGHT_ENABLE = yes # Enable RGB Underglow
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,107 +1 @@
|
||||||
#----------------------------------------------------------------------------
|
SLEEP_LED_ENABLE = yes
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
|
||||||
MCU = atmega32u4
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
# CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
||||||
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
|
||||||
# MIDI_ENABLE = YES # MIDI controls
|
|
||||||
# UNICODE_ENABLE = YES # Unicode
|
|
||||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
RGBLIGHT_ENABLE = no # Enable RGB Underglow
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -15,163 +15,11 @@ You should have received a copy of the GNU General Public License
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef CONFIG_USER_H
|
#pragma once
|
||||||
#define CONFIG_USER_H
|
|
||||||
|
|
||||||
#include "config_common.h"
|
|
||||||
|
|
||||||
/* USB Device descriptor parameter */
|
|
||||||
#define VENDOR_ID 0xFEED
|
|
||||||
#define PRODUCT_ID 0x6060
|
|
||||||
#define DEVICE_VER 0x0001
|
|
||||||
#define MANUFACTURER geekhack
|
|
||||||
#define PRODUCT GH60
|
|
||||||
|
|
||||||
/* key matrix size */
|
|
||||||
#define MATRIX_ROWS 5
|
|
||||||
#define MATRIX_COLS 14
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Keyboard Matrix Assignments
|
|
||||||
*
|
|
||||||
* Change this to how you wired your keyboard
|
|
||||||
* COLS: AVR pins used for columns, left to right
|
|
||||||
* ROWS: AVR pins used for rows, top to bottom
|
|
||||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
|
||||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
|
|
||||||
// Rev A
|
|
||||||
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
|
|
||||||
// Rev B/C
|
|
||||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
|
|
||||||
#define UNUSED_PINS
|
|
||||||
|
|
||||||
/* COL2ROW or ROW2COL */
|
|
||||||
#define DIODE_DIRECTION COL2ROW
|
|
||||||
|
|
||||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
|
||||||
#define DEBOUNCE 5
|
|
||||||
|
|
||||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
|
||||||
//#define MATRIX_HAS_GHOST
|
|
||||||
|
|
||||||
/* number of backlight levels */
|
|
||||||
#define BACKLIGHT_LEVELS 3
|
|
||||||
|
|
||||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
||||||
#define LOCKING_SUPPORT_ENABLE
|
|
||||||
/* Locking resynchronize hack */
|
|
||||||
#define LOCKING_RESYNC_ENABLE
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Force NKRO
|
|
||||||
*
|
|
||||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
|
||||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
|
||||||
* makefile for this to work.)
|
|
||||||
*
|
|
||||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
|
||||||
* until the next keyboard reset.
|
|
||||||
*
|
|
||||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
|
||||||
* fully operational during normal computer usage.
|
|
||||||
*
|
|
||||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
|
||||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
|
||||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
|
||||||
* power-up.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
//#define FORCE_NKRO
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Magic Key Options
|
|
||||||
*
|
|
||||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
|
||||||
* the keyboard. They are best used in combination with the HID Listen program,
|
|
||||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
|
||||||
*
|
|
||||||
* The options below allow the magic key functionality to be changed. This is
|
|
||||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
|
||||||
*
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* control how magic key switches layers */
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
|
||||||
|
|
||||||
/* override magic key keymap */
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
|
||||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
|
||||||
//#define MAGIC_KEY_HELP1 H
|
|
||||||
//#define MAGIC_KEY_HELP2 SLASH
|
|
||||||
//#define MAGIC_KEY_DEBUG D
|
|
||||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
|
||||||
//#define MAGIC_KEY_DEBUG_KBD K
|
|
||||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
|
||||||
//#define MAGIC_KEY_VERSION V
|
|
||||||
//#define MAGIC_KEY_STATUS S
|
|
||||||
//#define MAGIC_KEY_CONSOLE C
|
|
||||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
|
||||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
|
||||||
//#define MAGIC_KEY_LAYER0 0
|
|
||||||
//#define MAGIC_KEY_LAYER1 1
|
|
||||||
//#define MAGIC_KEY_LAYER2 2
|
|
||||||
//#define MAGIC_KEY_LAYER3 3
|
|
||||||
//#define MAGIC_KEY_LAYER4 4
|
|
||||||
//#define MAGIC_KEY_LAYER5 5
|
|
||||||
//#define MAGIC_KEY_LAYER6 6
|
|
||||||
//#define MAGIC_KEY_LAYER7 7
|
|
||||||
//#define MAGIC_KEY_LAYER8 8
|
|
||||||
//#define MAGIC_KEY_LAYER9 9
|
|
||||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
|
||||||
//#define MAGIC_KEY_LOCK CAPS
|
|
||||||
//#define MAGIC_KEY_EEPROM E
|
|
||||||
//#define MAGIC_KEY_NKRO N
|
|
||||||
//#define MAGIC_KEY_SLEEP_LED Z
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Feature disable options
|
|
||||||
* These options are also useful to firmware size reduction.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* disable debug print */
|
|
||||||
//#define NO_DEBUG
|
|
||||||
|
|
||||||
/* disable print */
|
|
||||||
//#define NO_PRINT
|
|
||||||
|
|
||||||
/* disable action features */
|
|
||||||
//#define NO_ACTION_LAYER
|
|
||||||
//#define NO_ACTION_TAPPING
|
|
||||||
//#define NO_ACTION_ONESHOT
|
|
||||||
//#define NO_ACTION_MACRO
|
|
||||||
//#define NO_ACTION_FUNCTION
|
|
||||||
|
|
||||||
/*
|
|
||||||
* RGB Underglow
|
|
||||||
* These settings are for the F4 by default:
|
|
||||||
*
|
|
||||||
*
|
|
||||||
* #define ws2812_pin PF4
|
|
||||||
* #define RGBLED_NUM 14 // Number of LEDs
|
|
||||||
* #define RGBLIGHT_HUE_STEP 10
|
|
||||||
* #define RGBLIGHT_SAT_STEP 17
|
|
||||||
* #define RGBLIGHT_VAL_STEP 17
|
|
||||||
*
|
|
||||||
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
|
|
||||||
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
|
|
||||||
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
|
|
||||||
*/
|
|
||||||
|
|
||||||
#define RGB_DI_PIN F4
|
#define RGB_DI_PIN F4
|
||||||
|
#define RGBLED_NUM 8
|
||||||
#define RGBLIGHT_ANIMATIONS
|
#define RGBLIGHT_ANIMATIONS
|
||||||
#define RGBLED_NUM 8 // Number of LEDs
|
|
||||||
#define RGBLIGHT_HUE_STEP 8
|
#define RGBLIGHT_HUE_STEP 8
|
||||||
#define RGBLIGHT_SAT_STEP 8
|
#define RGBLIGHT_SAT_STEP 8
|
||||||
#define RGBLIGHT_VAL_STEP 8
|
#define RGBLIGHT_VAL_STEP 8
|
||||||
#endif
|
|
||||||
|
|
|
||||||
|
|
@ -1,107 +1 @@
|
||||||
#----------------------------------------------------------------------------
|
RGBLIGHT_ENABLE = yes
|
||||||
# On command line:
|
|
||||||
#
|
|
||||||
# make all = Make software.
|
|
||||||
#
|
|
||||||
# make clean = Clean out built project files.
|
|
||||||
#
|
|
||||||
# make coff = Convert ELF to AVR COFF.
|
|
||||||
#
|
|
||||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
|
||||||
#
|
|
||||||
# make program = Download the hex file to the device.
|
|
||||||
# Please customize your programmer settings(PROGRAM_CMD)
|
|
||||||
#
|
|
||||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
|
||||||
# (must have teensy_loader_cli installed).
|
|
||||||
#
|
|
||||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
|
||||||
# have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
|
||||||
# have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
|
||||||
# (must have dfu-programmer installed).
|
|
||||||
#
|
|
||||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
|
||||||
# (must have Atmel FLIP installed).
|
|
||||||
#
|
|
||||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
|
||||||
# with avr-gdb or avr-insight as the front end for debugging.
|
|
||||||
#
|
|
||||||
# make filename.s = Just compile filename.c into the assembler code only.
|
|
||||||
#
|
|
||||||
# make filename.i = Create a preprocessed source file for use in submitting
|
|
||||||
# bug reports to the GCC project.
|
|
||||||
#
|
|
||||||
# To rebuild project do "make clean" then "make all".
|
|
||||||
#----------------------------------------------------------------------------
|
|
||||||
|
|
||||||
# MCU name
|
|
||||||
MCU = atmega32u4
|
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
# CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
||||||
# COMMAND_ENABLE = yes # Commands for debug and configuration
|
|
||||||
KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
# SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
# BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
|
||||||
# MIDI_ENABLE = YES # MIDI controls
|
|
||||||
# UNICODE_ENABLE = YES # Unicode
|
|
||||||
# BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
RGBLIGHT_ENABLE = yes # Enable RGB Underglow
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,55 +1,4 @@
|
||||||
# Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
|
|
||||||
# Modified 2018 Wayne Jones (WarmCatUK) <waynekjones@gmail.com>
|
|
||||||
|
|
||||||
# This program is free software: you can redistribute it and/or modify
|
|
||||||
# it under the terms of the GNU General Public License as published by
|
|
||||||
# the Free Software Foundation, either version 2 of the License, or
|
|
||||||
# (at your option) any later version.
|
|
||||||
#
|
|
||||||
# This program is distributed in the hope that it will be useful,
|
|
||||||
# but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
# GNU General Public License for more details.
|
|
||||||
#
|
|
||||||
# You should have received a copy of the GNU General Public License
|
|
||||||
# along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
|
|
||||||
# MCU name
|
|
||||||
MCU = atmega32a
|
|
||||||
|
|
||||||
# Bootloader selection
|
|
||||||
# Teensy halfkay
|
|
||||||
# Pro Micro caterina
|
|
||||||
# Atmel DFU atmel-dfu
|
|
||||||
# LUFA DFU lufa-dfu
|
|
||||||
# QMK DFU qmk-dfu
|
|
||||||
# ATmega32A bootloadHID
|
|
||||||
# ATmega328P USBasp
|
|
||||||
BOOTLOADER = bootloadHID
|
|
||||||
|
|
||||||
# build options
|
|
||||||
BOOTMAGIC_ENABLE = lite
|
|
||||||
MOUSEKEY_ENABLE = no
|
|
||||||
EXTRAKEY_ENABLE = yes
|
|
||||||
CONSOLE_ENABLE = no
|
|
||||||
COMMAND_ENABLE = yes
|
COMMAND_ENABLE = yes
|
||||||
BACKLIGHT_ENABLE = yes
|
|
||||||
RGBLIGHT_ENABLE = yes
|
|
||||||
RGBLIGHT_CUSTOM_DRIVER = yes
|
|
||||||
NKRO_ENABLE = no
|
|
||||||
# Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
TAP_DANCE_ENABLE = yes
|
TAP_DANCE_ENABLE = yes
|
||||||
AUTO_SHIFT_ENABLE = yes
|
AUTO_SHIFT_ENABLE = yes
|
||||||
|
|
||||||
|
|
||||||
DISABLE_WS2812 = no
|
|
||||||
|
|
||||||
KEY_LOCK_ENABLE = yes
|
KEY_LOCK_ENABLE = yes
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
||||||
|
|
||||||
# custom matrix setup
|
|
||||||
CUSTOM_MATRIX = yes
|
|
||||||
SRC = matrix.c i2c.c backlight.c
|
|
||||||
|
|
||||||
LAYOUTS = ortho_5x12
|
|
||||||
|
|
|
||||||
|
|
@ -1,33 +1,5 @@
|
||||||
# project specific files
|
# project specific files
|
||||||
SRC += rgb_matrix_user.c
|
SRC += rgb_matrix_user.c
|
||||||
|
|
||||||
#For platform and packs
|
|
||||||
ARM_ATSAM = SAMD51J18A
|
|
||||||
MCU = cortex-m4
|
|
||||||
|
|
||||||
CUSTOM_MATRIX = yes
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# comment out to disable the options.
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
||||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
|
||||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
|
||||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
|
||||||
UNICODE_ENABLE = no # Unicode
|
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
|
||||||
VIRTSER_ENABLE = no # USB Serial Driver
|
|
||||||
RAW_ENABLE = no # Raw device
|
|
||||||
AUTO_SHIFT_ENABLE = no # Auto Shift
|
|
||||||
|
|
||||||
# This keymap requires Massdrop Configurator support
|
# This keymap requires Massdrop Configurator support
|
||||||
OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR
|
OPT_DEFS += -DUSE_MASSDROP_CONFIGURATOR
|
||||||
|
|
|
||||||
|
|
@ -15,70 +15,7 @@ You should have received a copy of the GNU General Public License
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
*/
|
*/
|
||||||
|
|
||||||
#ifndef CONFIG_H
|
#pragma once
|
||||||
#define CONFIG_H
|
|
||||||
|
|
||||||
#include "config_common.h"
|
#undef BACKLIGHT_LEVELS
|
||||||
|
|
||||||
/* USB Device descriptor parameter */
|
|
||||||
#define VENDOR_ID 0xFEED
|
|
||||||
#define PRODUCT_ID 0x6060
|
|
||||||
#define MANUFACTURER OLKB
|
|
||||||
#define PRODUCT Planck
|
|
||||||
|
|
||||||
/* key matrix size */
|
|
||||||
#define MATRIX_ROWS 4
|
|
||||||
#define MATRIX_COLS 12
|
|
||||||
|
|
||||||
/* Planck PCB default pin-out */
|
|
||||||
#define MATRIX_ROW_PINS { D0, D5, B5, B6 }
|
|
||||||
#define MATRIX_COL_PINS { F1, F0, B0, C7, F4, F5, F6, F7, D4, D6, B4, D7 }
|
|
||||||
#define UNUSED_PINS
|
|
||||||
|
|
||||||
#define QMK_ESC_OUTPUT F1
|
|
||||||
#define QMK_ESC_INPUT D5
|
|
||||||
#define QMK_LED E6
|
|
||||||
#define QMK_SPEAKER C6
|
|
||||||
|
|
||||||
#define AUDIO_VOICES
|
|
||||||
#define AUDIO_PIN C6
|
|
||||||
|
|
||||||
#define BACKLIGHT_PIN B7
|
|
||||||
|
|
||||||
/* COL2ROW or ROW2COL */
|
|
||||||
#define DIODE_DIRECTION COL2ROW
|
|
||||||
|
|
||||||
/* define if matrix has ghost */
|
|
||||||
//#define MATRIX_HAS_GHOST
|
|
||||||
|
|
||||||
/* number of backlight levels */
|
|
||||||
#define BACKLIGHT_LEVELS 15
|
#define BACKLIGHT_LEVELS 15
|
||||||
|
|
||||||
/* Set 0 if debouncing isn't needed */
|
|
||||||
#define DEBOUNCE 5
|
|
||||||
|
|
||||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
|
||||||
#define LOCKING_SUPPORT_ENABLE
|
|
||||||
/* Locking resynchronize hack */
|
|
||||||
#define LOCKING_RESYNC_ENABLE
|
|
||||||
|
|
||||||
/*
|
|
||||||
* Feature disable options
|
|
||||||
* These options are also useful to firmware size reduction.
|
|
||||||
*/
|
|
||||||
|
|
||||||
/* disable debug print */
|
|
||||||
//#define NO_DEBUG
|
|
||||||
|
|
||||||
/* disable print */
|
|
||||||
//#define NO_PRINT
|
|
||||||
|
|
||||||
/* disable action features */
|
|
||||||
//#define NO_ACTION_LAYER
|
|
||||||
//#define NO_ACTION_TAPPING
|
|
||||||
//#define NO_ACTION_ONESHOT
|
|
||||||
//#define NO_ACTION_MACRO
|
|
||||||
//#define NO_ACTION_FUNCTION
|
|
||||||
|
|
||||||
#define TAPPING_TERM 200
|
|
||||||
#endif
|
|
||||||
|
|
|
||||||
|
|
@ -1,69 +1,3 @@
|
||||||
# MCU name
|
CONSOLE_ENABLE = no
|
||||||
MCU = atmega32u4
|
BACKLIGHT_ENABLE = yes
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Bootloader
|
|
||||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
|
||||||
# different sizes, comment this out, and the correct address will be loaded
|
|
||||||
# automatically (+60). See bootloader.mk for all options.
|
|
||||||
BOOTLOADER = atmel-dfu
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# change to "no" to disable the options, or define them in the Makefile in
|
|
||||||
# the appropriate keymap folder that will get included automatically
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
|
||||||
MIDI_ENABLE = no # MIDI controls
|
|
||||||
AUDIO_ENABLE = yes # Audio output on port C6
|
|
||||||
UNICODE_ENABLE = no # Unicode
|
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
|
||||||
API_SYSEX_ENABLE = no
|
|
||||||
TAP_DANCE_ENABLE = yes
|
TAP_DANCE_ENABLE = yes
|
||||||
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
||||||
|
|
||||||
LAYOUTS = ortho_4x12 planck_mit planck_grid
|
|
||||||
|
|
||||||
DEFAULT_FOLDER = planck/rev5
|
|
||||||
|
|
|
||||||
|
|
@ -1,37 +1,11 @@
|
||||||
#ifndef CONFIG_USER_H
|
#pragma once
|
||||||
#define CONFIG_USER_H
|
|
||||||
|
|
||||||
#include "../../config.h"
|
|
||||||
|
|
||||||
/* USB Device descriptor parameter */
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#undef VENDOR_ID
|
|
||||||
#undef PRODUCT_ID
|
|
||||||
#undef MANUFACTURER
|
#undef MANUFACTURER
|
||||||
|
#define MANUFACTURER binaryplease
|
||||||
#undef PRODUCT
|
#undef PRODUCT
|
||||||
|
#define PRODUCT Teensy_Planck
|
||||||
|
|
||||||
#undef MATRIX_ROW_PINS
|
#undef MATRIX_ROW_PINS
|
||||||
#undef MATRIX_COL_PINS
|
|
||||||
#undef UNUSED_PINS
|
|
||||||
#undef BACKLIGHT_PIN
|
|
||||||
#undef BACKLIGHT_LEVELS
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
#define VENDOR_ID 0xFEED
|
|
||||||
#define PRODUCT_ID 0x6060
|
|
||||||
#define MANUFACTURER binaryplease
|
|
||||||
#define PRODUCT Teensy_Planck
|
|
||||||
|
|
||||||
#define MATRIX_ROW_PINS { D3, D2, D1, D0 }
|
#define MATRIX_ROW_PINS { D3, D2, D1, D0 }
|
||||||
|
#undef MATRIX_COL_PINS
|
||||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6, D4 }
|
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D6, D4 }
|
||||||
#define UNUSED_PINS
|
|
||||||
|
|
||||||
#define BACKLIGHT_PIN B7
|
|
||||||
|
|
||||||
/* number of backlight levels */
|
|
||||||
#define BACKLIGHT_LEVELS 0
|
|
||||||
|
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
|
||||||
|
|
@ -1,68 +1,4 @@
|
||||||
# MCU name
|
CONSOLE_ENABLE = no
|
||||||
MCU = atmega32u4
|
NKRO_ENABLE = no
|
||||||
|
MIDI_ENABLE = yes
|
||||||
# Processor frequency.
|
AUDIO_ENABLE = no
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# change to "no" to disable the options, or define them in the Makefile in
|
|
||||||
# the appropriate keymap folder that will get included automatically
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|
||||||
MIDI_ENABLE = yes # MIDI controls
|
|
||||||
AUDIO_ENABLE = no # Audio output on port C6
|
|
||||||
UNICODE_ENABLE = no # Unicode
|
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
|
||||||
API_SYSEX_ENABLE = no
|
|
||||||
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
||||||
|
|
||||||
|
|
|
||||||
|
|
@ -1,7 +1,4 @@
|
||||||
#ifndef CONFIG_USER_H
|
#pragma once
|
||||||
#define CONFIG_USER_H
|
|
||||||
|
|
||||||
#include "../../config.h"
|
|
||||||
|
|
||||||
#ifdef AUDIO_ENABLE
|
#ifdef AUDIO_ENABLE
|
||||||
#define STARTUP_SONG SONG(PLANCK_SOUND)
|
#define STARTUP_SONG SONG(PLANCK_SOUND)
|
||||||
|
|
@ -35,5 +32,3 @@
|
||||||
|
|
||||||
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
/* override number of MIDI tone keycodes (each octave adds 12 keycodes and allocates 12 bytes) */
|
||||||
//#define MIDI_TONE_KEYCODE_OCTAVES 2
|
//#define MIDI_TONE_KEYCODE_OCTAVES 2
|
||||||
|
|
||||||
#endif
|
|
||||||
|
|
@ -1,70 +1,2 @@
|
||||||
# MCU name
|
MOUSEKEY_ENABLE = yes
|
||||||
MCU = atmega32u4
|
NKRO_ENABLE = no
|
||||||
|
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
|
|
||||||
# Boot Section Size in *bytes*
|
|
||||||
# Teensy halfKay 512
|
|
||||||
# Teensy++ halfKay 1024
|
|
||||||
# Atmel DFU loader 4096
|
|
||||||
# LUFA bootloader 4096
|
|
||||||
# USBaspLoader 2048
|
|
||||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# change to "no" to disable the options, or define them in the Makefile in
|
|
||||||
# the appropriate keymap folder that will get included automatically
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
||||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
|
||||||
MIDI_ENABLE = no # MIDI controls
|
|
||||||
AUDIO_ENABLE = yes # Audio output on port C6
|
|
||||||
UNICODE_ENABLE = no # Unicode
|
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
|
||||||
API_SYSEX_ENABLE = no
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
||||||
|
|
||||||
LAYOUTS = ortho_4x12 planck_mit planck_grid
|
|
||||||
|
|
||||||
DEFAULT_FOLDER = planck/rev4
|
|
||||||
|
|
|
||||||
|
|
@ -1,7 +1,4 @@
|
||||||
#pragma
|
#pragma once
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
/*
|
/*
|
||||||
* MIDI options
|
* MIDI options
|
||||||
|
|
@ -16,7 +13,6 @@
|
||||||
#define MOUSEKEY_MAX_SPEED 7
|
#define MOUSEKEY_MAX_SPEED 7
|
||||||
#define MOUSEKEY_WHEEL_DELAY 0
|
#define MOUSEKEY_WHEEL_DELAY 0
|
||||||
|
|
||||||
|
|
||||||
#define MIDI_BASIC
|
#define MIDI_BASIC
|
||||||
|
|
||||||
#define BACKLIGHT_BREATHING
|
#define BACKLIGHT_BREATHING
|
||||||
|
|
|
||||||
|
|
@ -1,81 +1,3 @@
|
||||||
# MCU name
|
MOUSEKEY_ENABLE = yes
|
||||||
MCU = atmega32u4
|
CONSOLE_ENABLE = no
|
||||||
|
BACKLIGHT_ENABLE = yes
|
||||||
# Processor frequency.
|
|
||||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
|
||||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
|
||||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
|
||||||
# automatically to create a 32-bit value in your source code.
|
|
||||||
#
|
|
||||||
# This will be an integer division of F_USB below, as it is sourced by
|
|
||||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
|
||||||
# does not *change* the processor frequency - it should merely be updated to
|
|
||||||
# reflect the processor speed set externally so that the code can use accurate
|
|
||||||
# software delays.
|
|
||||||
F_CPU = 16000000
|
|
||||||
|
|
||||||
#
|
|
||||||
# LUFA specific
|
|
||||||
#
|
|
||||||
# Target architecture (see library "Board Types" documentation).
|
|
||||||
ARCH = AVR8
|
|
||||||
|
|
||||||
# Input clock frequency.
|
|
||||||
# This will define a symbol, F_USB, in all source code files equal to the
|
|
||||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
|
||||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
|
||||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
|
||||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
|
||||||
# at the end, this will be done automatically to create a 32-bit value in your
|
|
||||||
# source code.
|
|
||||||
#
|
|
||||||
# If no clock division is performed on the input clock inside the AVR (via the
|
|
||||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
|
||||||
F_USB = $(F_CPU)
|
|
||||||
|
|
||||||
# Bootloader
|
|
||||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
|
||||||
# different sizes, comment this out, and the correct address will be loaded
|
|
||||||
# automatically (+60). See bootloader.mk for all options.
|
|
||||||
ifeq ($(strip $(KEYBOARD)), planck/rev3)
|
|
||||||
BOOTLOADER = atmel-dfu
|
|
||||||
endif
|
|
||||||
ifeq ($(strip $(KEYBOARD)), planck/rev4)
|
|
||||||
BOOTLOADER = atmel-dfu
|
|
||||||
endif
|
|
||||||
ifeq ($(strip $(KEYBOARD)), planck/rev5)
|
|
||||||
BOOTLOADER = qmk-dfu
|
|
||||||
endif
|
|
||||||
ifeq ($(strip $(KEYBOARD)), planck/light)
|
|
||||||
BOOTLOADER = qmk-dfu
|
|
||||||
endif
|
|
||||||
|
|
||||||
# Interrupt driven control endpoint task(+60)
|
|
||||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
|
||||||
|
|
||||||
# Build Options
|
|
||||||
# change to "no" to disable the options, or define them in the Makefile in[]
|
|
||||||
# the appropriate keymap folder that will get included automatically
|
|
||||||
#
|
|
||||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
|
||||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
|
||||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
|
||||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
|
||||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
|
||||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
|
||||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
|
||||||
MIDI_ENABLE = no # MIDI controls
|
|
||||||
AUDIO_ENABLE = yes # Audio output on port C6
|
|
||||||
UNICODE_ENABLE = no # Unicode
|
|
||||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
|
||||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
|
|
||||||
API_SYSEX_ENABLE = no
|
|
||||||
|
|
||||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
|
||||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
|
||||||
|
|
||||||
LAYOUTS = ortho_4x12 planck_mit planck_grid
|
|
||||||
LAYOUTS_HAS_RGB = no
|
|
||||||
|
|
||||||
DEFAULT_FOLDER = planck/rev5
|
|
||||||
|
|
||||||
|
|
|
||||||
Loading…
Reference in New Issue