tudattr
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Add pearl README, add rask's Pearl layout

master
Otto Rask 2018-03-19 16:25:46 +02:00 committed by Jack Humbert
parent ee1bb85542
commit b922a550dc
4 changed files with 200 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

85
keyboards/pearl/README.md Normal file
View File

@ -0,0 +1,85 @@
# Pearl 40%
Pearl 40% is a keyboard designed by Koobaczech. It uses an Atmel
ATMEGA32A MCU.
## Compiling and flashing
These instructions are for building and flashing your Pearl 40% without
Bootmapper Client.
### Requirements
#### Windows
(to be written, help needed)
#### Mac
Apart from regular QMK and AVR dependencies you need to install
`bootloadHID`. You can install it with `homebrew` as follows:
$ brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
If you don't use `homebrew` you can try following the compiling
instructions defined below in the Linux section.
#### Linux
For Linux you require all regular QMK dependencies, but make sure you're
using `gcc-avr` version 4.9 or higher. 4.8 and lower do not contain the
proper definitions for ATMEGA32A MCUs and QMK will fail while attempting
to compile a HEX for Pearl 40%.
E.g. you cannot compile Pearl 40% HEX on a regular Ubuntu 14.04 as
`gcc-avr` version is maxed to 4.8 on it.
Additionally you need an operational `bootloadHID` binary.
You can install `bootloadHID` by taking the following steps:
$ git clone https://github.com/robertgzr/bootloadHID ~/tmp/bootloadHIDsrc
$ cd ~/tmp/bootloadHIDsrc/commandline
$ make VENDORID=0x16c0 PRODUCTID=0x05DF # vid and pid for atmega32a
$ chmod +x bootloadHID && cp bootloadHID /usr/bin/bootloadHID
Running `which bootloadHID` should return `/usr/bin/bootloadHID`.
### Compiling
Enter the QMK root directory and compile a keymap with the following
command:
$ make pearl:<keymap>
where `<keymap>` is a layout directory under the `pearl` directory.
QMK should compile a HEX (called `pearl_<keymap>.hex`) for you, which
you can flash using `bootloadHID`.
### Flashing
To enable Pearl 40% bootloading mode, unplug the keyboard, then plug it
in while holding `Esc` at the same time (the top-leftmost switch on the
PCB, next to the USB connector). Once the board is in bootload mode,
issue the following command (you might require `sudo` to perform the
command):
# assuming we're still in the QMK root dir where you compiled a HEX into
$ bootloadHID -r ./pearl_<keymap>.hex
You should see something similar to
> Page size = <value>
> Device size = <value>; <value> remaining
> Uploading <value> bytes starting at 0 (0x0)
> <value> ... <current value>
where `<current value>` should be slowly increasing as the HEX is being
flashed to the board. If there is some warning about `resource busy` it
should still work OK.
Once done the board underglow should turn red and the new firmware has
been flashed. If you can't type on the board try plugging it in again
(without holding any keys to prevent accidentally setting it into
bootload mode again).

5
keyboards/pearl/keymaps/rask/.editorconfig Normal file
View File

@ -0,0 +1,5 @@
root = true
[*.c]
indent_size = 4
indent_style = space

23
keyboards/pearl/keymaps/rask/README.md Normal file
View File

@ -0,0 +1,23 @@
# rask's Pearl 40%
## Layout
The firmware offers five layers:
1. Base layer
2. Base with numbers and symbols (Fn1)
3. Base with F-row and arrows (Fn2)
4. Base with media and RGB controls (Fn3)
5. More nav and utils (Fn2+Fn3, aka NavFn)
![rask's Pearl 40% layout](https://i.imgur.com/gKVQapZ.png)
Base for this firmware copied from jetpacktuxedo's QMK firmware.
---
## Compiling and flashing
To compile a HEX follow the Pearl 40% instructions.
Flashing instructions also available at Pearl 40% instructions.

87
keyboards/pearl/keymaps/rask/keymap.c Normal file
View File

@ -0,0 +1,87 @@
#include "pearl.h"
#define ____ KC_TRNS
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
// BASE LAYER
[0] = KEYMAP(
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC,
MO(2), KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, MO(3),
KC_LCTL, KC_LALT, KC_BSPC, MO(1), MO(1), KC_SPC, KC_RALT, KC_LGUI
),
// BASE LAYER TWO (Fn1)
[1] = KEYMAP(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL,
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_QUOT, KC_BSLS,
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_RSFT,
____, ____, ____, ____, ____, ____, ____, ____
),
// FROW LAYER AND ARROWS (Fn2)
[2] = KEYMAP(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,
____, ____, ____, ____, ____, ____, ____, ____, ____, KC_UP, ____, ____,
____, ____, ____, ____, ____, ____, ____, ____, KC_LEFT, KC_DOWN,KC_RGHT, MO(4),
____, ____, ____, ____, ____, ____, ____, ____
),
// MEDIA AND RGB (Fn3)
[3] = KEYMAP(
____, ____, ____, ____, ____, ____, ____, ____, ____, KC_MPRV,KC_MPLY, KC_MNXT, KC_DEL,
____, ____, ____, RGB_HUI, RGB_SAI,RGB_VAI,____, ____, ____, ____, ____, ____,
____, RGB_MOD, RGB_TOG, RGB_HUD, RGB_SAD,RGB_VAD,____, ____, ____, ____, ____, ____,
____, ____, ____, ____, ____, ____, ____, ____
),
// UTIL (Fn1+Fn3)
[4] = KEYMAP(
____, ____, ____, ____, ____, ____, ____, ____, ____, ____, ____, KC_PSCR, ____,
____, ____, ____, ____, ____, ____, ____, ____, ____, KC_PGUP,____, ____,
____, ____, ____, ____, ____, ____, ____, ____, KC_HOME, KC_PGDN,KC_END, ____,
RESET, ____, ____, ____, ____, ____, ____, ____
),
};
/**
* Status LED layer indicators courtesy of jetpacktuxedo's firmware
*/
uint32_t layer_state_set_kb(uint32_t state)
{
// if we are on layer 1
if (state & (1<<1)){
// light num lock led
PORTD |= (1 << PD0);
} else{
PORTD &= ~(1 << PD0);
}
// if we are on layer 2
if (state & (1<<2)){
// light caps lock led
PORTD |= (1 << PD1);
} else{
PORTD &= ~(1 << PD1);
}
// if we are on layer 3
if (state & (1<<3)){
// light scroll lock led
PORTD |= (1 << PD6);
} else{
PORTD &= ~(1 << PD6);
}
/*
// if we are on layer 4
if (state & (1<<4)){
// light all leds
PORTD |= (1 << PD0);
PORTD |= (1 << PD1);
PORTD |= (1 << PD6);
} else{
PORTD &= ~(1 << PD0);
PORTD &= ~(1 << PD1);
PORTD &= ~(1 << PD6);
}
*/
return state;
}