several improvements for mitosis:datagrok (#1960)
* mitosis/datagrok: reduce features from rules.mk * mitosis/datagrok: make both layer keys neighbor shift * mitosis/datagrok: (no-op) tweak some comments * mitosis/datagrok: set baudrate to 250k This requires a corresponding change to the mitosis wireless firmware: https://github.com/reversebias/mitosis/pull/10 * mitosis/datagrok: move design description from code comment to a readme * mitosis/datagrok: new layout, new shifted keys, efficient LED code This is experimental, but compiles and seems to work correctly. * mitosis/datagrok: whoops, move readme.md * mitosis/datagrok: a minor layout improvement simplifies custom-shifted code instead of [, .] [? !], using [, ?] [. !] greatly simplifies the code needed to perform the shifted-key switching. (And keeps , and . on the same keys that they are under qwerty.) also: layout improvements for symbols * mitosis/datagrok: make my code conform to QMK style guidelines * mitosis/datagrok: TODO note for layout table in README * mitosis/datagrok: remove led_set_user until i figure out other changes need to see if the corresponding changes needed in the keyboard-level code is okay. * mitosis/datagrok: simpler layer indicator * mitosis/datagrok: undo change to keyboard baud; make it in my layout dir. * mitosis/datagrok: apply same punctuation hack to qwerty layer * mitosis/datagrok: enable qwerty layer toggle * mitosis/datagrok: update readmemaster
Michael F. Lamb
Jack Humbert
parent
80e489e122
commit
e899cb8940
|
|
@ -0,0 +1,22 @@
|
||||||
|
#ifndef CONFIG_USER_H
|
||||||
|
#define CONFIG_USER_H
|
||||||
|
|
||||||
|
#include "../../config.h"
|
||||||
|
|
||||||
|
// I use a pro micro clocked at 8Mhz. It can't reach 1M baud, so this is the
|
||||||
|
// next fastest possible baud without errors. I don't notice any difference in
|
||||||
|
// behavior at this slower speed. (So I think it should maybe be the default,
|
||||||
|
// to allow a single codebase to support both available flavors of pro micro.)
|
||||||
|
// This requires a corresponding change to the wireless module firmware; see
|
||||||
|
// https://github.com/reversebias/mitosis/pull/10
|
||||||
|
#undef SERIAL_UART_BAUD // avoids redefinition warning
|
||||||
|
#define SERIAL_UART_BAUD 250000
|
||||||
|
|
||||||
|
// TODO: figure out which of these I can safely enable to reduce firmware size.
|
||||||
|
//#define NO_ACTION_LAYER
|
||||||
|
//#define NO_ACTION_TAPPING
|
||||||
|
//#define NO_ACTION_ONESHOT // can't; errors
|
||||||
|
//#define NO_ACTION_MACRO
|
||||||
|
//#define NO_ACTION_FUNCTION
|
||||||
|
|
||||||
|
#endif
|
||||||
|
|
@ -1,34 +1,12 @@
|
||||||
#include "mitosis.h"
|
#include "mitosis.h"
|
||||||
|
|
||||||
// Arrows in a layer in the home position.
|
|
||||||
// Fn+Arrows = PgUp PgDn Home End, which is intuitive for me
|
|
||||||
//
|
|
||||||
// Since QWERTY and WORKMAN keep angle brackets together, I wanted to place
|
|
||||||
// other enclosing symbols on the same keys. So, 9 and 0 and [ and ] land there
|
|
||||||
// in other layers. That informed the numbers placement, which informed the
|
|
||||||
// function-key placement.
|
|
||||||
//
|
|
||||||
// To do:
|
|
||||||
// - Improve LED indications (may require modding bluetooth firmware):
|
|
||||||
// - Is any board nonresponsive (which one?)
|
|
||||||
// - Does either board have a low battery?
|
|
||||||
// - Use "shifted keys" hack to make programming symbols easier to type
|
|
||||||
// - Add "media" keysyms, Insert, PrintScr, Pause/Break
|
|
||||||
// - Dynamically toggle QWERTY or other layouts
|
|
||||||
// - See if the henkans placement is at all useful for Japanese speakers, or
|
|
||||||
// abuse different keysyms
|
|
||||||
// - Overlay a 10key numpad somewhere
|
|
||||||
// - Mod a speaker onto my receiver and enable tones
|
|
||||||
// - Mod more indicator LEDs onto my receiver
|
|
||||||
// - Do something with Num/Caps/Scroll lock?
|
|
||||||
// - Improve tri-layer behavior
|
|
||||||
|
|
||||||
enum mitosis_layers
|
enum mitosis_layers
|
||||||
{
|
{
|
||||||
_WORKMAN,
|
_xW, // workman
|
||||||
_FUNC,
|
_xQ, // qwerty
|
||||||
_NUMS,
|
_xS, // symbols
|
||||||
_NMFN
|
_xN, // numbers
|
||||||
|
_xF // functions
|
||||||
};
|
};
|
||||||
|
|
||||||
// Fillers to make layering more clear
|
// Fillers to make layering more clear
|
||||||
|
|
@ -42,63 +20,121 @@ enum mitosis_layers
|
||||||
#define KC_RHYP KC_INT4 // HYPER (actually muhenkan 無変換 and henkan 変換)
|
#define KC_RHYP KC_INT4 // HYPER (actually muhenkan 無変換 and henkan 変換)
|
||||||
#define KC_LHYP KC_INT5 // or NFER/XFER.
|
#define KC_LHYP KC_INT5 // or NFER/XFER.
|
||||||
|
|
||||||
// I didn't want to mess about with new keymappings and custom logic etc. to
|
// Momentary tri-state layers. Mitosis default keymap does this too but employs
|
||||||
// enable tri-state layers like mitosis default does. This layout accomplishes
|
// new keymappings and a bunch of conditional code. This simpler keymap
|
||||||
// it with a small quirk that triggering both layers then releasing one
|
// accomplishes it, but with a small quirk: triggering both layers then
|
||||||
// out-of-order will leave the tri-state triggered. Which doesn't bother me.
|
// releasing one out-of-order will leave the tri-state triggered until the
|
||||||
|
// other is released. Which doesn't bother me.
|
||||||
|
|
||||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||||
[_WORKMAN] = {
|
[_xW] = {
|
||||||
{KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN},
|
{KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN},
|
||||||
{KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I},
|
{KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I},
|
||||||
{KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH},
|
{KC_Z, KC_X, KC_M, KC_C, KC_V, KC_K, KC_L, KC_COMM, KC_DOT, KC_QUOT},
|
||||||
{XXXXXXX, MO(_NUMS), KC_LCTL, KC_LSFT, KC_BSPC, KC_SPC, KC_RSFT, KC_RCTL, MO(_NUMS), XXXXXXX},
|
{XXXXXXX, KC_LSUP, KC_LCTL, MO(_xN), KC_LSFT, KC_RSFT, MO(_xN), KC_RCTL, KC_RSUP, XXXXXXX},
|
||||||
{XXXXXXX, KC_LHYP, KC_LSUP, KC_LMTA, MO(_FUNC), MO(_FUNC), KC_RMTA, KC_RSUP, KC_RHYP, XXXXXXX}
|
{XXXXXXX, KC_LHYP, KC_LMTA, MO(_xS), KC_BSPC, KC_SPC, MO(_xS), KC_RMTA, KC_RHYP, XXXXXXX}
|
||||||
},
|
},
|
||||||
[_FUNC] = {
|
[_xQ] = {
|
||||||
{KC_ESC, _______, KC_UP, _______, _______, _______, _______, _______, _______, KC_QUOT},
|
{KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P},
|
||||||
{KC_TAB, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, _______, _______, KC_GRV},
|
{KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN},
|
||||||
{_______, _______, _______, _______, _______, _______, _______, KC_LBRC, KC_RBRC, KC_BSLS},
|
{KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_QUOT},
|
||||||
{XXXXXXX, MO(_NMFN), _______, _______, KC_DEL, KC_ENT, _______, _______, MO(_NMFN), XXXXXXX},
|
{XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX},
|
||||||
{XXXXXXX, _______, _______, _______, ___M___, ___M___, _______, _______, _______, XXXXXXX},
|
{XXXXXXX, _______, _______, _______, _______, _______, _______, _______, _______, XXXXXXX}
|
||||||
},
|
},
|
||||||
[_NUMS] = {
|
[_xS] = {
|
||||||
{_______, _______, _______, _______, _______, _______, KC_1, KC_2, KC_3, KC_4},
|
{KC_ESC, _______, KC_UP, _______, _______, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TILD},
|
||||||
{_______, _______, _______, _______, _______, _______, KC_5, KC_6, KC_7, KC_8},
|
{KC_TAB, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_CIRC, KC_AMPR, KC_PIPE, KC_GRV, KC_UNDS},
|
||||||
{_______, _______, _______, _______, _______, _______, KC_MINS, KC_9, KC_0, KC_EQL},
|
{KC_BSLS, KC_RPRN, KC_RCBR, KC_RBRC, KC_RABK, KC_LABK, KC_LBRC, KC_LCBR, KC_LPRN, KC_SLSH},
|
||||||
{XXXXXXX, ___M___, _______, _______, _______, _______, _______, _______, ___M___, XXXXXXX},
|
{XXXXXXX, _______, _______, MO(_xF), _______, _______, MO(_xF), _______, _______, XXXXXXX},
|
||||||
{XXXXXXX, _______, _______, _______, MO(_NMFN), MO(_NMFN), _______, _______, _______, XXXXXXX},
|
{XXXXXXX, _______, _______, ___M___, KC_DEL, KC_ENT, ___M___, _______, _______, XXXXXXX},
|
||||||
},
|
},
|
||||||
[_NMFN] = {
|
[_xN] = {
|
||||||
{_______, _______, KC_PGUP, _______, _______, _______, KC_F1, KC_F2, KC_F3, KC_F4},
|
{_______, _______, _______, _______, _______, KC_PSLS, KC_P7, KC_P8, KC_P9, KC_P0},
|
||||||
{_______, KC_HOME, KC_PGDN, KC_END, _______, _______, KC_F5, KC_F6, KC_F7, KC_F8},
|
{_______, _______, _______, _______, _______, KC_PAST, KC_P4, KC_P5, KC_P6, KC_PPLS},
|
||||||
{_______, _______, _______, _______, _______, _______, KC_F8, KC_F9, KC_F10, KC_F12},
|
{_______, _______, _______, _______, _______, KC_PMNS, KC_P1, KC_P2, KC_P3, KC_PEQL},
|
||||||
{XXXXXXX, ___M___, _______, _______, _______, _______, _______, _______, ___M___, XXXXXXX},
|
{XXXXXXX, _______, _______, ___M___, _______, _______, ___M___, _______, _______, XXXXXXX},
|
||||||
{XXXXXXX, _______, _______, _______, ___M___, ___M___, _______, _______, _______, XXXXXXX},
|
{XXXXXXX, _______, _______, MO(_xF), _______, KC_PENT, MO(_xF), _______, _______, XXXXXXX},
|
||||||
},
|
},
|
||||||
|
[_xF] = {
|
||||||
|
{_______, _______, KC_PGUP, _______, KC_VOLU, KC_F13, KC_F7, KC_F8, KC_F9, KC_F10},
|
||||||
|
{_______, KC_HOME, KC_PGDN, KC_END, KC_VOLD, KC_F14, KC_F4, KC_F5, KC_F6, KC_F11},
|
||||||
|
{TG(_xQ), KC_MPRV, KC_MPLY, KC_MNXT, KC_MUTE, KC_F15, KC_F1, KC_F2, KC_F3, KC_F12},
|
||||||
|
{XXXXXXX, _______, _______, ___M___, _______, _______, ___M___, _______, _______, XXXXXXX},
|
||||||
|
{XXXXXXX, _______, _______, _______, ___M___, ___M___, _______, _______, _______, XXXXXXX},
|
||||||
|
},
|
||||||
};
|
};
|
||||||
|
|
||||||
|
// This is a hack to place <question mark> on <shift-comma> and <exclaimation
|
||||||
|
// mark> on <shift-period>, when using an operating system configured for a
|
||||||
|
// US/qwerty layout.
|
||||||
|
bool comm_shifted = false;
|
||||||
|
bool ques_shifted = false;
|
||||||
|
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||||
|
uint8_t shifted;
|
||||||
|
uint16_t s_keycode;
|
||||||
|
bool *k_shifted;
|
||||||
|
|
||||||
|
switch (keycode) {
|
||||||
|
case KC_COMM:
|
||||||
|
s_keycode = KC_SLSH;
|
||||||
|
k_shifted = &comm_shifted;
|
||||||
|
break;
|
||||||
|
case KC_DOT:
|
||||||
|
s_keycode = KC_1;
|
||||||
|
k_shifted = &ques_shifted;
|
||||||
|
break;
|
||||||
|
default:
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
|
||||||
|
shifted = get_mods() & (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT));
|
||||||
|
|
||||||
|
// Keydown. If shift is currently pressed, register its alternate keycode.
|
||||||
|
if (record->event.pressed && shifted) {
|
||||||
|
*k_shifted = true;
|
||||||
|
register_code(s_keycode);
|
||||||
|
return false;
|
||||||
|
// Keyup. If shift was pressed back when the key was pressed, unregister
|
||||||
|
// its alternate keycode.
|
||||||
|
} else if (!(record->event.pressed) && *k_shifted) {
|
||||||
|
*k_shifted = false;
|
||||||
|
unregister_code(s_keycode);
|
||||||
|
return false;
|
||||||
|
// Otherwise, behave as normal.
|
||||||
|
} else {
|
||||||
|
return true;
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
// Set the bits of A selected by MASK to the corresponding bits of B
|
||||||
|
#define setbits(A, B, MASK) A = (A & (B | ~MASK)) | (B & MASK)
|
||||||
void matrix_scan_user(void) {
|
void matrix_scan_user(void) {
|
||||||
uint8_t layer = biton32(layer_state);
|
//
|
||||||
|
// Bit # 7 6 5 4 3 2 1 0
|
||||||
|
// layer_state: [ | | | _xF | _xN | _xS | _xQ | _xW ]
|
||||||
|
// usb_led [ | | |kana |cmps |scrl |caps | num ]
|
||||||
|
// PORTB: [ NC | 10 | 9 | 8 | 14 | 16 | 15 |rxled]
|
||||||
|
// PORTC: [ NC | 5 | | | | | | ]
|
||||||
|
// PORTD: [ 6 | NC |txled| 4 | tx* | rx* | grn | p29 ]
|
||||||
|
// PORTE: [ | 7 | | | | | | ]
|
||||||
|
// PORTF: [ a0 | a1 | red | blu | | | NC | NC ]
|
||||||
|
//
|
||||||
|
// PD0 is connected to the pairing switch and p29 on the wireless module.
|
||||||
|
// PF0,PF1,PB7,PC7,PD6 are not broken out by the pro micro board. I don't understand why.
|
||||||
|
// PB1-PB6,PD4,PD5,PD6,PF6,PF7 are not connected to the Mitosis receiver
|
||||||
|
// board. Each may be connected to an LED by way of a resistor (4.7k to
|
||||||
|
// match the others) for a total of 14 additional indicators.
|
||||||
|
|
||||||
switch (layer) {
|
// A simple (but technically inaccurate) model of the momentary layer state:
|
||||||
case _WORKMAN:
|
// Fn1 key makes _xS active; indicator = red
|
||||||
red_led_off;
|
// Fn2 key makes _xN active; indicator = blue
|
||||||
grn_led_off;
|
// Both keys make _xF active; indicator = purple
|
||||||
break;
|
// Toggling QWERTY mode makes indicator include green, so (red/blue/purple becomes yellow/cyan/white)
|
||||||
case _FUNC:
|
|
||||||
red_led_off;
|
// negated because for ports 0=LED on.
|
||||||
grn_led_on;
|
uint32_t portf_bits = ~(layer_state|layer_state<<1|(layer_state&0b100)<<3);
|
||||||
break;
|
setbits(PORTF, portf_bits, 0b00110000);
|
||||||
case _NUMS:
|
setbits(PORTD, ~layer_state, 0b00000010);
|
||||||
red_led_on;
|
}
|
||||||
grn_led_off;
|
|
||||||
break;
|
// vim: set sw=2 et:
|
||||||
case _NMFN:
|
|
||||||
red_led_on;
|
|
||||||
grn_led_on;
|
|
||||||
break;
|
|
||||||
default:
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
};
|
|
||||||
|
|
|
||||||
|
|
@ -0,0 +1,74 @@
|
||||||
|
|
||||||
|
|
||||||
|
[Keyboard layout editor source](http://www.keyboard-layout-editor.com/#/gists/e1a6a7a480fd4984c0bed38ee35f6c4f)
|
||||||
|
|
||||||
|
# a layout for the Mitosis
|
||||||
|
|
||||||
|
- Emphasis on momentary modifiers, all usable from either hand, arranged
|
||||||
|
symmetrically, but distinguishable left/right by the OS. Shift, Fn1
|
||||||
|
("Lower"), Fn2 ("Raise"), Super ("Windows"), Meta ("Alt"), Hyper.
|
||||||
|
|
||||||
|
- Fn1 and Fn2 are used to momentary-enable (like a shift key) one of three layers:
|
||||||
|
|
||||||
|
- Fn1 (Red): Symbols layer
|
||||||
|
- Fn2 (Blue): Numbers layer
|
||||||
|
- Both: Functions layer
|
||||||
|
|
||||||
|
- The base layer is a slight variant of [Workman][]. QWERTY may be toggled-on.
|
||||||
|
|
||||||
|
- Paired programming symbols (braces, brackets, parentheses) are arranged
|
||||||
|
symmetrically in the symbols layer. `?` and `!` are moved to take the place
|
||||||
|
of `<` and `>`.
|
||||||
|
|
||||||
|
- No OS keymap modification required.
|
||||||
|
|
||||||
|
## Design notes
|
||||||
|
|
||||||
|
- **I use an 8Mhz Pro Micro.** If you want to use this keymap with the standard
|
||||||
|
16Mhz Pro Micro specified in the Mitosis design:
|
||||||
|
|
||||||
|
- Remove the lines in `rules.mk` mentioning `F_CPU` and `F_USB`.
|
||||||
|
- Remove the lines in `config.h` mentioning `SERIAL_UART_BAUD`.
|
||||||
|
|
||||||
|
- I'm learning a new key placement, so might as well go all out and use an
|
||||||
|
optimal non-QWERTY layout.
|
||||||
|
|
||||||
|
- I like the way Workman feels and some of its advantages over Colemak.
|
||||||
|
Unfortunately, it was designed using a weighting system based on a standard
|
||||||
|
column-staggered keyboard so is probably not as optimal as one could achieve
|
||||||
|
on an ergonomic board like the Mitosis.
|
||||||
|
|
||||||
|
- Arrows in the home position (on a layer). Mod+Arrows = PgUp/PgDn/Home/End,
|
||||||
|
which is intuitive for me
|
||||||
|
|
||||||
|
### Abandoned ideas
|
||||||
|
|
||||||
|
- ~~"Since QWERTY and Workman keep angle brackets together, place other
|
||||||
|
enclosing symbols on the same keys. This informs the numbers placement,
|
||||||
|
which informs the function-key placement."~~
|
||||||
|
|
||||||
|
- I tried this and it was bad. I don't like having to pick the right
|
||||||
|
modifier to get the right flavor of bracket. Instead, now, one modifier
|
||||||
|
activates a symbols layer where all brackets are easily accessible.
|
||||||
|
|
||||||
|
- Space/Enter to the left of layer select for Enter doesn't work well; I always
|
||||||
|
trigger space first.
|
||||||
|
|
||||||
|
- I used to have Blue layer on ring finger, but that was too hard to use in
|
||||||
|
conjunction with shift.
|
||||||
|
|
||||||
|
## To do
|
||||||
|
|
||||||
|
- Improve LED indications (may require modding bluetooth firmware):
|
||||||
|
- Is any board nonresponsive (which one?)
|
||||||
|
- Does either board have a low battery?
|
||||||
|
- Add Insert, PrintScr, Pause/Break
|
||||||
|
- Make QWERTY base layer for people who customize layout in software? Store
|
||||||
|
default base layer in eeprom?
|
||||||
|
- See if the henkans placement is at all useful for Japanese speakers, or abuse
|
||||||
|
different keysyms
|
||||||
|
- Mod a speaker onto my receiver and enable tones
|
||||||
|
- Implement "layer lock" key
|
||||||
|
- Improve tri-layer behavior
|
||||||
|
|
||||||
|
[Workman]: https://viralintrospection.wordpress.com/2010/09/06/a-different-philosophy-in-designing-keyboard-layouts/
|
||||||
|
|
@ -0,0 +1,15 @@
|
||||||
|
# I use an 8Mhz Pro Micro
|
||||||
|
F_CPU = 8000000
|
||||||
|
# Necessary, with above change?
|
||||||
|
F_USB = $(F_CPU)
|
||||||
|
|
||||||
|
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||||
|
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||||
|
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||||
|
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||||
|
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||||
|
UNICODE_ENABLE = no # Unicode
|
||||||
|
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||||
|
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||||
|
MIDI_ENABLE = no # MIDI controls
|
||||||
|
# vim: set ts=8 noet:
|
||||||
Loading…
Reference in New Issue