* Improve backlight PWM pin support
* I accidentally an equals sign
* Another typo
* Order by pin number
* Throw an error if backlight pin is C4 or C5 on 16/32U4
* Use else for clarity
* Minor alignment adjustments
* Store backlight breathing state in EEPROM
* Reduce backlight_config.level from 6 bits to 4 (max 15 "on" levels)
* Error out if BACKLIGHT_LEVELS is > 15
* Remove mention of default backlight pin in rules.mk template
* Remove pointless comment
* Align sendstring LUTs to 9 characters wide
* Replace 0 with XXXXXXX
* Use decimal 128 for LUT size
* Align heading comments
* Add ASCII table comments
* Add missing AltGr LUTs and adjust keycode LUTs accordingly
* Use pragma once
* Correct a couple more keycodes
* Capitalise "BÉPO"
* Also clean up the default tables
* Tidy up Belgian and Norman LUTs
* Fix breathing always on for soft PWM
* Remove reference to hardware PWM pins in BACKLIGHT_BREATHING description
Now, breathing will only be unsupported when Timers 1 and 3 are both used by Audio
* Document BACKLIGHT_ON_STATE and its purpose
* Fix backlight breathing on C6
* Account for ATmega32A's single TIMSK register (MT40)
* Document hardware PWM on D4 for ATmega32A
* Add C6 and D4 to BACKLIGHT_PIN description
* clean up rgb matrix extern usage
Moved rgb matrix boiler plate into macros
Rebased onto typing heatmap pr
* Fixing the reversed frame buffer access in digital rain
* Fixing digital rain & typing heatmap if keyreactive effects are not enabled
* Apply suggestions from code review
Co-Authored-By: Drashna Jaelre <drashna@live.com>
* Adding parenthesizes to DRIVER_LED_TOTAL where necessary
* Updated docs
* added notes about parentheses
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
* Refactor jj40 in line with current ps2avrgb template
* Disable bootmagic lite as it seems to not work on atmega32a/bootloadHID
* Add backlight pwm bodge till #4324 lands
* Increase planck keymap compatibility
* Add customizable tapping terms
* Add Documentation
* Fix function
* Fixes
* It's not a pointer
* Add debugging output
* Update documentation to be at least vaguely accurate
* Use `get_tapping_term(tapping_key.event)` instead
`e` doesn't include column and row information, properly. It registers as 255, regardless of the actual keypress.
However `tapping_key.event` actually gives the correct column and row information. It appears be the correct structure to use.
In fact, it looks like the issue is that `e` is actually the "TICK" structure, as defined in keyboard.h
* Use variable tapping term value rather than define
* Silly drashna - tapping_key.event, not event
* add get_event_keycode() function
* Fix typo
Co-Authored-By: drashna <drashna@live.com>
* Remove post_process_record_quantum since it's the wrong PR
* Update quantum/quantum.c
Co-Authored-By: drashna <drashna@live.com>
* Better handle ifdef statement for permissive hold
Since we can't be sure that tapping term is actually 500
* Update quantum.c comments based on feedback
* Clean up get_tapping_term function
Clean up function so that users don't need to call the event function, and instead only check the keycode
* Add ability to run functionality on and off
* Make ifdef's more compact
* RGB Matrix overhaul
Breakout of animations to separate files
Integration of optimized int based math lib
Overhaul of rgb_matrix.c and animations for performance
* Updating effect function api for future extensions
* Combined the keypresses || keyreleases define checks into a single define so I stop forgetting it where necessary
* Moving define RGB_MATRIX_KEYREACTIVE_ENABLED earlier in the include chain
* Draft commit of typing speed RGB control
* More information in the readme
* Support all RGB animation modes (Fixes#1)
* Added support for all RGB light modes to use typing speed
Except christmas lights because that is seizure-inducing at high speeds!
* Introduced a value range specific to each RGB mode
Because some modes are a little too much when running at full speed!
* Update readme.md
* Update readme.md
* Re-arrange typing_speed definitions (Fixes#5) (#6)
* Re-arrange variable definitions to avoid including quantum.h from rgblight.c
* Fix a compilation error when trying to run make test:all
* Tweaks to the typing speed decay rate
* Renamed to momentum; moved implementation into dedicated files
* Groundwork for toggling momentum on/off (currently always on)
* Add EEPROM toggle for momentum-matching
* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic
* Move momentum decay task out of rgblight_task()
* Fix missing momentum.h in lufa.c
* Experimental LED support (untested)
* Draft commit of typing speed RGB control
* More information in the readme
* Support all RGB animation modes (Fixes#1)
* Added support for all RGB light modes to use typing speed
Except christmas lights because that is seizure-inducing at high speeds!
* Introduced a value range specific to each RGB mode
Because some modes are a little too much when running at full speed!
* Update readme.md
* Update readme.md
* Re-arrange typing_speed definitions (Fixes#5) (#6)
* Re-arrange variable definitions to avoid including quantum.h from rgblight.c
* Fix a compilation error when trying to run make test:all
* Tweaks to the typing speed decay rate
* Renamed to momentum; moved implementation into dedicated files
* Groundwork for toggling momentum on/off (currently always on)
* Add EEPROM toggle for momentum-matching
* Moved momentum out of RGBLIGHT_ENABLE toggles so it's more generic
* Move momentum decay task out of rgblight_task()
* Fix missing momentum.h in lufa.c
* Added documentation
* Renamed feature to velocikey
* Reverted readme to original state
* Correct the readme title
* Updated feature name in the docs
* Update EECONFIG name
* Add compile-time toggles for velocikey
* Update feature documentation
* Revert "Merge branch 'led-support' into master"
This reverts commit e123ff5febf61639b9a9020748e1c2e2313460ff, reversing
changes made to df111a55b9d4929182e16108b1c0ead15b16df97.
* Move velocikey EECONFIG definition to depend on VELOCIKEY_ENABLE
* Rename decay_task function to decelerate
* Apply suggestions from code review
Co-Authored-By: chrislewisdev <chris@chrislewisdev.com>
* Re-order eeconfig definitions
* Apply coding conventions
* Apply #ifdef check in lufa.c
* Refactored interval time checks into one functionc
* Small rename
* Fix unused function error for layouts not using all rgb effects
* Only update EEPROM if Velocikey is enabled
* Incorporate code review feedback
* Small adjustment to top-end decay rate
* Add Velocikey documentation to table of contents
* Bring tetris:default keymap size down by disabling audio
* initial work to add eeprom to haptic feedback and decouple the feedback process from keyboards
* Haptic feedback enhancements: on/off toggle working, feedback order working
todo:
-work on modes switching
-get modes switching to save to eeprom
* haptic enhancement - eeprom and modes added
* Added set and get functions for haptic feedback
* initial implementation of solenoids under haptic feedback
* changed eeprom to 32 bits to reserve blocks for future features
* start documentation of haptic feedback
* change keycode per comment from reviewers
* typo fixes
* added eeprom for solenoid configs
* added solenoid and docs
* Add/fix default parameters configs, improve docs
* more doc cleanup
* add in solenoid buzz toggle, clean up doc
* some fixes for error in compiling solenoid
* fix a chibios specific i2c read function and added one for AVR controllers in DRV2605L.c
* fixes for avr side issues
* update keymap
* fix keymap compile error
* fix bugs found during solenoid testing
* set pin that is not powered during bootloader
* added warning about certain pins on the MCU may trip solenoid during DFU/bootloader
* Improvement of Space Cadet Shift by preventing to automatically apply a modifier on the key and allow to override the default modifier. Closesqmk/qmk_firmware#3815
* Improve the use of the DISABLE_SPACE_CADET_MODIFIER flag to avoid unregistering KC_LSFT when equals to LSPO_MOD
* change #if to if statement
* [BACKLIGHT_CAPS_LOCK_INDICATOR] Use backlight toggling as Caps Lock LED
I've implemented this feature because S65-X doesn't have LED indicators
and the existing led_set_kb(usb_led) function try to use backlight as
indicator but that creates an inconsistency with backlight_config state.
- define `BACKLIGHT_CAPS_LOCK_INDICATOR` to enable Caps Lock indicator
using backlight (for keyboards without dedicated LED)
- Don't turn off LED indicators when suspend because backlight is
already turned off. Else led_set(0) will turn back on backlight.
- Documentation has been updated
* [BACKLIGHT_CAPS_LOCK_INDICATOR] Turn off all LED indicators except Caps Lock if BACKLIGHT_CAPS_LOCK_INDICATOR
* [BACKLIGHT_CAPS_LOCK] Rename BACKLIGHT_CAPS_LOCK_INDICATOR
* [BACKLIGHT_CAPS_LOCK] Use new IS_LED_ON method
I think `quantum.h` should contain only API declarations that `quantum.c` provides externally. `rgb.h` contains function weak definitions. This should not be in `quantum.h`.
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* remove merge artifacts
* Unicode common cleanup (#17)
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix white spaces
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Rearrange process_unicode_common functions
* Make Unicode input mode constants (UC_*) an enum
* Simplify unicode_input_start/finish code
* Make the key used for WinCompose configurable
* Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY
* Update Unicode input mode doc
* Add descriptions and rearrange definitions in process_unicode_common.h
* Add registry command to Unicode docs + misc updates
* Reword an explanation in Unicode docs
* Add TODO comment
* Remove trailing whitespace
* Improve Cycling documentation
* Add Unicode Input method Cycling support (#19)
* Standardize the Unicode EEPROM code
* Remove unicode init from process_record_* functions
* Add unicode init to where it belongs: matrix_init_quantum
* Move Unicode proccessing to unicode common
* Add audio feedback to input mode keys to drive konstantin up a wall
* Tap_code cleanup
* Update keycodes
* Update unicode documentation
* Update unicode keycodes for consistency/easier merge
* Add Audio Feedback section
* Remove Functions from feature page
And link to the file instead. Link to specific lines later on.
* Fix white spaces
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* Because I missed it!
Co-Authored-By: drashna <drashna@live.com>
* Fix spacing
Co-Authored-By: drashna <drashna@live.com>
* SPAAAAAAAAAACing
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Add BSD for future compatibility
* Thought I fixed that!
Co-Authored-By: drashna <drashna@live.com>
* non-breaking
Co-Authored-By: drashna <drashna@live.com>
* Considered that
Co-Authored-By: drashna <drashna@live.com>
* Yuuup
Co-Authored-By: drashna <drashna@live.com>
* consistency
Co-Authored-By: drashna <drashna@live.com>
* white spaces .... copied from elsewhere
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* white spaces
Co-Authored-By: drashna <drashna@live.com>
* Update keycode defines
* Fix Linux Song
* Update all of the songs
* Cleanup
* Move and update check to ensure only one unicode method is enabled
* Update quantum/quantum_keycodes.h
* Update documentation
* Wordsmithing and cleanup
* Format unicode_common (#13)
* case alignment
* process_record_unicode_common → process_unicode_common
* Move song arrays into function where they're used, align preprocessor directives
* Swap the order of UC_WIN and UC_BSD
* Update Unicode docs
* Reorder Unicode mode stuff to match the order of input mode constants
* Fix capitalization in doc subtitle
* Readd BSD and OSX_RALT songs
* Reword BSD note in docs
* Readd BSD keycode description
* Reword explanation of input on different platforms
* Steal vomindoraan's input mode documentation
Co-Authored-By: vomindoraan (vomindoraan@gmail.com)
* Willingly give Drashna the rest of my Unicode doc improvements
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Rearrange process_unicode_common functions
* Make Unicode input mode constants (UC_*) an enum
* Simplify unicode_input_start/finish code
* Make the key used for WinCompose configurable
* Remove UC_OSX_RALT in favor of setting the key with UNICODE_OSX_KEY
* Update Unicode input mode doc
* Add descriptions and rearrange definitions in process_unicode_common.h
* Add registry command to Unicode docs + misc updates
* Reword an explanation in Unicode docs
* Add TODO comment
* Add cycle_unicode_input_mode and UNICODE_SELECTED_MODES macro
* Add an option for making cycle changes persistent
* Add debug prints to functions that change input_mode
* Use cycle_unicode_input_mode in whitefox/konstantin
* Add persist_unicode_input_mode function
* Add offset to cycle to allow stepping in reverse
* Add keycodes: UNICODE_MODE_FORWARD, UNICODE_MODE_REVERSE
Aliases: UC_MOD, UC_RMOD (respectively)
* REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts
* Fix wrong constant name
* Revert "REVERT ME: Undo changes to whitefox/konstantin to avoid conflicts"
This reverts commit 42676bf251fc8e3823f5e614dad6e510ba47a2f3.
* Change dprintf text
* Give selected modes priority over EEPROM when !UNICODE_CYCLE_PERSIST
* Remove trailing whitespace
* Cleanup of RALT code and unicode compilation stuff
* Remove else for unicode handling
* Add delay in Tap Code to avoid issues
I think a few people have reporting issues with it working properly, and it may be a timing issue. The 'register_code' uses this sort of delay in some of the functions, and
this is probably why.
Adding the 100ms delay should hopefully fix any issues with it.
* Make tap_code delay configurable
* Update documentation
* Bring tap_code16 inline with changes
* Fix type for tap_code16
Bad copy-paste job
* Just use the value check for the define
* Clarify timing in docs
Co-Authored-By: drashna <drashna@live.com>
* Wordsmithing
Co-Authored-By: drashna <drashna@live.com>
* Preliminary additon of bootmagic lite functionality
* Cleanup code
* Clean up bootmagic code
* Add documentation and clean up code
* Make 'lite' an option for BOOTMAGIC_ENABLE
* Update Templates with note about Bootmagic Lite option
* Detect Debounce variable
* Make sure debounce is a non-zero number
* Capitalize Bootmagic
* Capitalize bootmagic
* Update wording
* Re-add EEPROM reset, by popular demand
And add eeprom-less version to drashna userspace for his sanity
* Fix spacing
* Set BOOTMAGIC_ENABLE to use full/lite/off
And default yes to "full" for compatibility
* Add Bootmagic lite info to templates
* Remove text from makefiles
* Cleanup of makefile
* mention yes in bootmagic docs
* Wordsmitthing the docs
* Fix white spaces
* Readd default bootmagic setting, because it's necessary
* Add Function level EEPROM configuration
Add kb and user functions for EEPROM, and example of how to use it.
* Bug fixes and demo
* Additional cleanup
* Add EEPROM reset macro to example
* Forgot init function in list
* Move eeconfig_init_quantum function to quantum.c and actually set default layer
* See if removing weak quantum function fixes issue
* Fix travis compile error
* Remove ifdef blocks from EECONFIG so settings are always set
* Fix for ARM EEPROM updates
* Fix merge issues
* Fix potential STM32 EEPROM issues
* Remove chording as it is not documented, not used, and needs work.
* Make Leader Key an optional feature.
* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`
* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
* add temporary test code rgblight-macro-test1.[ch]
* rgblight.h : mode auto numberring and auto generate mode name symbol
No change in build result.
* rgblight.c use RGBLIGHT_MODE_xxx symbols
No change in build result.
* quantum.c use RGBLIGHT_MODE_xxx symbols
No change in build result.
* fix build break. when RGB_MATRIX_ENABLE defined
* add temporary test code rgblight-macro-test2.[ch]
* modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper()
* modify rgblight_task()
* configurable each effect compile on/off in config.h
* update docs/feature_rgblight.md
* fix conflict. docs/feature_rgblight.md
* remove temporary test code rgblight-macro-test*.[ch]
* fix comment typo.
* remove old mode number from comment
* update docs/feature_rgblight.md about effect mode
* Revert "update docs/feature_rgblight.md about effect mode"
This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d.
* some change docs/feature_rgblight.md
* fix typo
* docs/feature_rgblight.md update: revise mode number table
* Line ending stuff again
* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)
* Added personal keymap, updated some of the EH files
* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional
* Added split code from lets_split, removed pro micro imports and LED code
THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT
* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now
* Updated eh.c
* More rework of the I2C code, added global flags for split boards.
* Introduced RGB over I2C, having weird edge case issues at the moment though
* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..
* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C
* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.
- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed
* Updated documentation for the new makefile options and #defines specific to split keyboards
* Added a bit more info to docs, so people aren't confused
* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder
* Removed some debugging from eh.c
* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).
* Added a README file to the Let's Split Eh?
* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c
* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.
* Fixed lets_split_eh not having a default version
* Removed "eh" references from lets_split folder for now
* Took lets_split folder from master to fix travis build errors, weird my local was overriding.
* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others
* Removed rules.mk from my lets_split keymap, not needed
* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
* integrated Peter Fleury's LCD library for HD44780 LCDs
* fixed typo
* cleanup finished
* add documentation
* added HD44780 documentation
* removed keyboard from .gitmodules
* resolved merge conflict
* removed edit of kira75s rules.mk made by merge
* moved hd44780 to drivers/avr
* Added licence info to hd44780 files
* Added link to hd44780 docs.
* Added Modular keyboards L,R and NUM
Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split
* Remove modular from master
This is to fix incorrect branching
* Add effect speed support for RGB Matrix *No eeprom yet*
Keycodes RGB_SPI and RGB_SPD have been added to increase and decrease effect speed.
Speed is not saved in EEPROM yet as per Jack's request.
* Update rgb_matrix.c
* RGB Matrix speed fix rgblight.h
* More fixes for rgb speed. Speed functions declared but not used in rgblight
* More travis fixes..
* Another one for travis..
* Change handling of adjust layer to make it more LT(...) friendly.
* Update based on feedback from drashna.
* Change handling of adjust layer to make it more LT(...) friendly. This reworks handling to make it a little more friendly to include in keymaps.
* Skip process_music in NO_MUSIC_MODE is defined
* Skip matrix_scan_music if NO_MUSIC_MODE is defined
* Skip music_all_notes_off if NO_MUSIC_MODE is defined
* Leave matrix_scan_music in, because it reduces firmware size by 150b....
* Add docs for NO_MUSIC_MODE
* Move lufa descriptor to protocol/usb_descriptor
* Try to compile usb_descriptor on ChibiOS
* Add lufa_utils for ChibiOS
Lufa USB descriptors for ChibiOS
* More lufa_util compatibility fixes
* First compiling version of shared USB descriptor
* Send the usb descriptors
* Fix the CONSOLE output on ChibiOS
* Add errors for unsupported interfaces
* Enable support for vitual serial port USB descriptors
* Implement virtual serial port for ChibiOS
* Cleanup the lufa_utils
Use the default lufa header files
* Add raw hid support for ChibiOS
This is completely untested
* Enable midi compilation on ChibiOS
* Move midi functionality out of lufa.c
* Don't register sysex callback when not needed
* ChibiOS compilation fixes
* Update ChibiOS submodule
* Fix the Midi USB descriptor
It didn't work properly when both Midi and Virtual serial port was enabled.
* Add MIDI support for ChibiOS
* Fix USB descriptor strings on ChibiOS
* Use serial usb driver for raw hid
* Generalize the ChibiOS stream like drivers
This makes the initialization much more simple and eliminates a lot of
the code duplication.
* Convert console output to chibios stream driver
* Fixes for ChibiOS update
* Update the ChibiOS contrib submodule
To include the usb data toggle synchronization fixes
* Fix duplicate reset enumeration on ChibiOS
* Add missing include
* Add number of endpoints check for ChibiOS
* Enable serial USB driver on all keyboards
* Add missing includes when API is enabled withot midi
* Add another missing inlcude
* Cleanup Mechmini keymap. Once the custom RGB function is defined, there is no need to manually handle RGB code.
* Change default to KEYMAP_MIT, not KEYMAP_OFFSET
* Add custom RGB code for JJ40
* Reset Mechmini advertised power draw to 500. Will have to test actual maximum power draw later.
* RGB working on JJ40.
* Fix: saturation increase/decrease flipped
* Add new directory for my custom keymap with RGB keycodes
* Swap LAlt and LGUI
* Update JJ40 max power draw with measured value
* Update: fun40 rules.mk to enable underglow; earlier failed Travis CI
* Fix: init RGB LEDs on boot. Also added HHKB-like keymap for XD60.
* Super rudimentary backlight test, init RGB LEDs on boot
* Backlighting works - stays on for now
* Toggling working
* Now can override backlight.c functions. Problem was functions in backlight.c weren't called before due to a lack of matrix_scan_quantum() in matrix.c
* Timers not working
* Delete global.h
* Cleanup
* Compiles
* Good sign: LEDs stop working again
* Handle timer1 overflow
* Progress: fix: forgot to init
* Backlighting fully working now except breathing.
* Revert keymap to original keycodes
* Update XD60 keymap README
* Update JJ40 keymap with backlight toggles
* Breathing working just fine.
* Update references
* Add backlight_set() call
* Cleanup code to disable backlight
* Fix: does not compile
* Fix: missing call to rgblight_task.
* Testing with BACKLIGHT_BREATHING
* Cleanup
* Cleanup comments
* More commenting cleanup.
* Do not enable BACKLIGHT_BREATHING by default
* add breathing to bananasplit
* backlight breathing overhaul
* fix the backlight_tick thing.
* fix for vision_division backlight
* fix a few keymaps and probably break breathing for some weirdly set-up boards.
* remove BL_x keycodes because they made unreasonable assumptions
* some fixes for BL keycodes
* integer cie lightness scaling
* use cie lightness for non-breathing backlight and make breathing able to reach true max brightness
* new planck keymap, new feature - hybrid shift/enter action key (great for small keyboards!)
* corrected documentation to specify rules.mk file instead of Makefile
* pull fuse settings for bootloader jump
* fix 32a chips
* make automatic bootloader selection optional
* quantify bootloaders
* fixs #164, speeds up dfu reset
* fix for chips w/o usb
* missing an n
* fix bootloader sizes, use words for addresses
* fix bmini, pearl, and [[ issue, make things quiet
* ignore avr errors on arm for now
* update settings for the light
* document bootloader stuff
* add bootloader title
This commit adds a new keycode `RGB_SMOD` which is the same as `RGB_MOD` (cycle through all modes),
but when it is used in combination with shift it will reverse the direction.
* Allow the knight animation to be restricted to a portion of the LED strip
* Add keys for jumping directly to particular animation modes
* Remove orphaned break statements
* Tweak the `RGB_MODE` buttons so they cycle through the same mode.
* small indentation fix
Requires virtser; Allows QMK to speak the TX BOlt protocol used by stenography machines and software (such as Plover). The upside is that Plover can be configured to listen only to TX Bolt allow the keyboard to switch layers without need to enable/disable the Plover software, or to have a second non-Steno keyboard work concurrently.
Instead of having all sendstring keycode mappings in the main quantum.c
file, give each one its own file in keymap_extras that can be #included
in a user's keymap. If one is included, it will define the appropriate
lookup tables and overwrite the weak definitions in quantum.c.
(Including more than one sendstring definition will fail at compile
time.)
Update @rai-suta's test keymap to match, as well as the documentation.
Refactor new-ish JIS_KEYCODE send_string implementation with existing
send_string
Reshuffle JIS in line with other alternative keycodes for sendstring,
and make them all accessible via compile-time options
Add a separate function to allow sending a string with a delay.
* Clarify the license for files we have signoff on
* Update against the currently signed off files
* Remove unused and not clearly licensed headers
* Replace an #endif I accidentally removed while resolving merge conflicts
Refactored Bluetooth support to make adding new Bluetooth modules
easier in the future.
* Remove `OUT_BLE` key from QMK's keymap. `OUT_BT` is all we need now
as there's no difference anymore.
* Made BLUETOOTH_ENABLE build option legacy as not to break existing
keymaps (Falls back to existing EZ Key support if on)
* Removed `ADAFRUIT_BLE_ENABLE` build option
* Created new build option `BLUETOOTH` with module option (Currently
`AdafruitEZKey` & `AdafruitBLE`)
* Moved all LUFA bluetooth key/mouse events under `BLUETOOTH_ENABLE`
ifdef with selected modules output.
Update existing keymaps to enable MIDI_BASIC functionality. Also added
an option MIDI_ENABLE_STRICT to be strict about keycode use (which also
reduces memory footprint at runtime)
Scenario:
Locking the KC_LSHIFT, and then using a tap dance key that registers a
S(KC_9) will unregister the KC_LSHIFT.
The tap dance or any keycode that is registered should not have the
side effect of cancelling a locked moditifier. We should be using a
similar logic as the TMK codes in tmk_core/comman/action.c:158.
In register_code16 and unregister_code16 we call register_code and
unregister_code twice, once for the mods and once for the keycode.
The (un)register_code have many check to see that keycode we have sent
however because we know that we are sending it a mods key, why not
just skip all of it and call (un)register_mods instead. This will skip
alot of checks and should speedup the loop a little.
Define a default TAPPING_TERM in quantum.c, for keyboards that do not
have it set. Fixes the CI failure.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
When one holds a Space Cadet shift, to have it act as a shift, so that
mouse behaviour changes, when released without any other key pressed, it
still registers a paren. To remedy this, add a hold timeout: if the key
is held longer than TAPPING_TERM, it will not register the parens.
Fixes#884, with the side-effect of not being able to have parens
trigger the OS-side repeat anymore.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
These functions register not only the 8bit keycode, but the modifiers
too. It doesn't handle the full range of the upper 8bits, just the mods,
but that's a good start.
Changed the tap-dance pair functions to use these, so one can do:
`ACTION_TAP_DANCE_DOUBLE (KC_COLN, KC_SCLN)`
...and that will do the right thing.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
Moves RGB controls out of the macro function and assigns them their own
keycodes:
RGB_TOG (toggle on/off)
RGB_MOD (mode step)
RGB_HUI (increase hue)
RGB_HUD (decrease hue)
RGB_SAI (increase saturation)
RGB_SAD (decrease saturation)
RGB_VAI (increase brightness)
RGB_VAD (decrease brightness)
Allows you to press RSHIFT to cancel the insertion of a "(" when holding down LSHIFT. Alternatively, allows you to press LSHIFT to cancel the insertion of a ")" when holding down RSHIFT. This change enables you to renege from outputting a character should you press a shift key erroneously.
* Modularity and gcc warnings fixes.
* Add ChibiOS support (USB stack + support files).
* Make usb_main more USB_DRIVER #define independent.
* Move chibios to tool.
* Implement jump-to-bootloader.
* Small updates.
* Fix bootloader-jump compiling.
* Move AVR specific sleep_led.c into avr.
* Add basic sleep_led for chibios.
* Update chibios README.
* NKRO fixes.
* Rename some Makefile defines.
* Move STM32 bootloader address config to separate .h file.
* Add ARM Teensies bootloader code.
* Fix chibios/usb_main GET_REPORT handing.
* Add missing #include to keymap.c.
* Make bootmagic.c code portable (_delay_ms -> wait_ms).
* Move declaration of keymap_config.
Should really not declare variables in .h files - since it's included
in different .c files, a proper linker then complains that the same
variable is declared more than once (once for each .c file that the
offending .h is included in).
* Add eeprom support for chibios/kinetis.
* Rename chibios example keyboard.
* Move chibios/cortex selection to local Makefiles.
* Chibios: use WFI in idle. WIP suspend stuff.
* ChibiOS/kinetis: sending remote wakeup.
* ChibiOS/STM32: send remote wakeup.
* Fix report size of boot protocol.
* Fix drop key stroke
Keyboard report should be checked if its transfer finishs successfully.
Otherwise key stroke can be missing when other key event occurs
before the last report transfer is done.
Boot protocol 10ms interval probably causes this problem in case
it receives key events in a row within the period. NKRO protocol
suffers less or nothing due to its interval 1ms.
* Chibios/usb_main: rename a variable for clarity.
* Add correct chibios/bootloader_jump for infinity KB.
* ChibiOS: make reset request more CMSISy.
* Chibios: Add breathing sleep LED on Kinetis MCUs.
* ChibiOS: Update infinity bootloader code to match updated ChibiOS.
* ChibiOS: prettify/document sleep_led code.
* Chibios: Remove the wait in the main loop.
* Add maple mini code.
* Do timeout when writing to CONSOLE EP queue.
Fixes TMK bug #266.
* Chibios: add 'core/protocol' to the makefiles' search path.
* Chibios: Update to new USB API.
* Chibios: add more guards for transmitting (fix a deadlock bug).
* Add update for chibios in README
* Chibios: Fix a HardFault bug (wait after start).
* Chibios: cleanup usb_main code.
* Chibios: Revert common.mk change (fix AVR linking problem).
* core: Fix chibios user compile options
Compile options can be defined in project Makefile such as UDEFS, UADEFS, UINCDIR, ULIBDIR and ULIBS.
* Sysv format for ChibiOS arm-none-eabi-size
Some new patches to ChibiOS puts heap as it's own section. So the
berkeley format is now useless, as the heap will be included in the
BSS report. The sysv format displays the bss size correctly.
* Fix hard-coded path of CHIBIOS
* Add support for new version of ChibiOS and Contrib
The Kinetis support has moved to a separate Contrib repository in
the newest version of Chibios. There has also been some structure
changes. So this adds support for those, while maintaining back-
wards compability.
* Update ChibiOS instructions
* Chibios: implement sleep LED for STM32.
* Chibios: Update the main chibios README.
* Chibios: fix STM32_BOOTLOADER_ADDRESS name.
* Chibios: make the default bootloader_jump redefinable (weak).
* Chibios: disable LTO (link-time optimisation).
With LTO enabled, sometimes things fail for mysterious reasons
(e.g. bootloader jump on WF with LEDs enabled), just because the
linker optimisation is too aggressive.
* Chibios: add default location for chibios-contrib.
* ChibiOS: update mk to match chibios/master.
* ChibiOS: update instructions.md.
* Add chibi_onekey example.
* Add comments to chibi_onekey Makefile.
* Rename some Makefile defines.
* Move STM32 bootloader address config to separate .h file.
* Rename chibios example keyboard.
* Move chibios/cortex selection to local Makefiles.
* Add Teensy LC onekey example.
* Chibios: use WFI in idle. WIP suspend stuff.
* Update chibi/teensy instructions.
* Update chibios/Teensy instructions.
* Add infinity_chibios
* Add keymap_hasu.c
* Infinity_chibios: select correct bootloader_jump.
* Infinity_chibios: improve comments.
* Add generic STM32F103C8T6 example.
* Add maple mini code.
* STM32F103x fixes.
* Add maple mini pinout pic.
* Chibios: updates for 3.0.4 git.
* Chibios: rename example stm32_onekey -> stm32_f072_onekey.
* Chibios: add makefiles for Teensy 3.x examples.
* Chibios: update Teensy 3.x instructions.
* Chibios: Tsy LC is cortex-m0plus.
* Chibios: add more guards for transmitting (fix a deadlock bug).
* Change README for chibios
* Chibios: update examples to current chibios git.
Match the changes in mainline chibios:
- update chconf.h
- update supplied ld scripts structure
- update Teensy instructions (switch to official
chibios and introduce contrib)
* Add ChibiOS and ChibiOS-Contrib submodules
Also fix the makefile path for them.
* Moves chibios keyboards to keyboards folder
* First version of ChibiOS compilation
Only the stm32_f072_onkey keyboard is ported at the moment. It
compiles, but still doesn't link.
* More chibios fixes
It now compiles without warnings and links
* Move the teensy_lc_onekey to the keyboards folder
* Clean up the make file rule structure
* Remove keymap_fn_to_action
* Update more ChibiOS keyboards to QMK
Most of them does not compile at the moment though.
* Use older version of Chibios libraries
The newest ones have problems with compilation
* Remove USB_UNCONFIGURED event
It isn't present in the older version of ChibiOS
* Fix the infinity_chibios compilation
* Fix potentially uninitialized variable
* Add missing include
* Fix the ChibiOS makefile
* Fix some Chibios keyboard compilation
* Revert the rules.mk file back to master version
* Combine the chibios and AVR makefiles
With just the required overrides in the respective platform
specific one.
* Slight makefile restrucuring
Platform specific compiler options
* Move avr specific targets out of the main rules
* Fix ChibiOS objcopy
The ChibiOS objcopy needs different parameters, so the parameters
are moved to the corresponding platform rule file
* Fix the objcopy for real this time
The comands were moved around, so chibios used avr and the ohter
way around.
Also change the objsize output format
* Fix the thumb flags
* Fix the infinity hasu keymap
* Per platform cpp flags
* Add gcc-arm-none-eabi package to travis
* Add arm-none-eabi-newlib to travis
* Fix the name of the libnewlib-arm-none-eabi lib
* Fix the ChibiOS paths
So that they are properly relative, and builds don't generate
extra folders
* Fix the board path of stm32_f103_onekey
* Only consider folders with Makefiles as subproject
* non-working commit
* working
* subprojects implemented for planck
* pass a subproject variable through to c
* consolidates clueboard revisions
* thanks for letting me know about conflicts..
* turn off audio for yang's
* corrects starting paths for subprojects
* messing around with travis
* semicolon
* travis script
* travis script
* script for travis
* correct directory (probably), amend files to commit
* remove origin before adding
* git pull, correct syntax
* git checkout
* git pull origin branch
* where are we?
* where are we?
* merging
* force things to happen
* adds commit message, adds add
* rebase, no commit message
* rebase branch
* idk!
* try just pull
* fetch - merge
* specify repo branch
* checkout
* goddammit
* merge? idk
* pls
* after all
* don't split up keyboards
* syntax
* adds quick for all-keyboards
* trying out new script
* script update
* lowercase
* all keyboards
* stop replacing compiled.hex automatically
* adds if statement
* skip automated build branches
* forces push to automated build branch
* throw an add in there
* upstream?
* adds AUTOGEN
* ignore all .hex files again
* testing out new repo
* global ident
* generate script, keyboard_keymap.hex
* skip generation for now, print pandoc info, submodule update
* try trusty
* and sudo
* try generate
* updates subprojects to keyboards
* no idea
* updates to keyboards
* cleans up clueboard stuff
* setup to use local readme
* updates cluepad, planck experimental
* remove extra led.c [ci skip]
* audio and midi moved over to separate files
* chording, leader, unicode separated
* consolidate each [skip ci]
* correct include
* quantum: Add a tap dance feature (#451)
* quantum: Add a tap dance feature
With this feature one can specify keys that behave differently, based on
the amount of times they have been tapped, and when interrupted, they
get handled before the interrupter.
To make it clear how this is different from `ACTION_FUNCTION_TAP`, lets
explore a certain setup! We want one key to send `Space` on single tap,
but `Enter` on double-tap.
With `ACTION_FUNCTION_TAP`, it is quite a rain-dance to set this up, and
has the problem that when the sequence is interrupted, the interrupting
key will be send first. Thus, `SPC a` will result in `a SPC` being sent,
if they are typed within `TAPPING_TERM`. With the tap dance feature,
that'll come out as `SPC a`, correctly.
The implementation hooks into two parts of the system, to achieve this:
into `process_record_quantum()`, and the matrix scan. We need the latter
to be able to time out a tap sequence even when a key is not being
pressed, so `SPC` alone will time out and register after `TAPPING_TERM`
time.
But lets start with how to use it, first!
First, you will need `TAP_DANCE_ENABLE=yes` in your `Makefile`, because
the feature is disabled by default. This adds a little less than 1k to
the firmware size. Next, you will want to define some tap-dance keys,
which is easiest to do with the `TD()` macro, that - similar to `F()`,
takes a number, which will later be used as an index into the
`tap_dance_actions` array.
This array specifies what actions shall be taken when a tap-dance key is
in action. Currently, there are two possible options:
* `ACTION_TAP_DANCE_DOUBLE(kc1, kc2)`: Sends the `kc1` keycode when
tapped once, `kc2` otherwise.
* `ACTION_TAP_DANCE_FN(fn)`: Calls the specified function - defined in
the user keymap - with the current state of the tap-dance action.
The first option is enough for a lot of cases, that just want dual
roles. For example, `ACTION_TAP_DANCE(KC_SPC, KC_ENT)` will result in
`Space` being sent on single-tap, `Enter` otherwise.
And that's the bulk of it!
Do note, however, that this implementation does have some consequences:
keys do not register until either they reach the tapping ceiling, or
they time out. This means that if you hold the key, nothing happens, no
repeat, no nothing. It is possible to detect held state, and register an
action then too, but that's not implemented yet. Keys also unregister
immediately after being registered, so you can't even hold the second
tap. This is intentional, to be consistent.
And now, on to the explanation of how it works!
The main entry point is `process_tap_dance()`, called from
`process_record_quantum()`, which is run for every keypress, and our
handler gets to run early. This function checks whether the key pressed
is a tap-dance key. If it is not, and a tap-dance was in action, we
handle that first, and enqueue the newly pressed key. If it is a
tap-dance key, then we check if it is the same as the already active
one (if there's one active, that is). If it is not, we fire off the old
one first, then register the new one. If it was the same, we increment
the counter and the timer.
This means that you have `TAPPING_TERM` time to tap the key again, you
do not have to input all the taps within that timeframe. This allows for
longer tap counts, with minimal impact on responsiveness.
Our next stop is `matrix_scan_tap_dance()`. This handles the timeout of
tap-dance keys.
For the sake of flexibility, tap-dance actions can be either a pair of
keycodes, or a user function. The latter allows one to handle higher tap
counts, or do extra things, like blink the LEDs, fiddle with the
backlighting, and so on. This is accomplished by using an union, and
some clever macros.
In the end, lets see a full example!
```c
enum {
CT_SE = 0,
CT_CLN,
CT_EGG
};
/* Have the above three on the keymap, TD(CT_SE), etc... */
void dance_cln (qk_tap_dance_state_t *state) {
if (state->count == 1) {
register_code (KC_RSFT);
register_code (KC_SCLN);
unregister_code (KC_SCLN);
unregister_code (KC_RSFT);
} else {
register_code (KC_SCLN);
unregister_code (KC_SCLN);
reset_tap_dance (state);
}
}
void dance_egg (qk_tap_dance_state_t *state) {
if (state->count >= 100) {
SEND_STRING ("Safety dance!");
reset_tap_dance (state);
}
}
const qk_tap_dance_action_t tap_dance_actions[] = {
[CT_SE] = ACTION_TAP_DANCE_DOUBLE (KC_SPC, KC_ENT)
,[CT_CLN] = ACTION_TAP_DANCE_FN (dance_cln)
,[CT_EGG] = ACTION_TAP_DANCE_FN (dance_egg)
};
```
This addresses #426.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* hhkb: Fix the build with the new tap-dance feature
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Move process_tap_dance further down
Process the tap dance stuff after midi and audio, because those don't
process keycodes, but row/col positions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* tap_dance: Use conditionals instead of dummy functions
To be consistent with how the rest of the quantum features are
implemented, use ifdefs instead of dummy functions.
Signed-off-by: Gergely Nagy <algernon@madhouse-project.org>
* Merge branch 'master' into quantum-keypress-process
# Conflicts:
# Makefile
# keyboards/planck/rev3/config.h
# keyboards/planck/rev4/config.h
* update build script
* Updated personal layouts
* tweaked personal
* Nightly - Audio Cleanup
Refactored the LUTs. Abstracted some of the registers out of audio to
use more functional names. Split audio into audio and audio_pwm. WIP
* nightly - collapsed code
* Added check for note playing to LEDs
* Usability tweaks
* TWEAE
* nightly
added extra kcs to keymap common
* turned on Plank audio
* Added backlight breathing to atomic
* reverted accidental merge
* Added music and audio toggles to Quantum.c
* Redid the audio callbacks
* Adjusted default planck layout to use the user tone naming
* tabs to spaces
* Rewrote the ALL recipe to allow for faster parallel make
* tabs to spaces
* Renamed custom event functions to be 'startup_user' and 'shutdown_user'. Also moved the prototypes around.
* Tweaked pvc atomic layout to work with the pvc planck.
* updates midi scale calling
* Unicode
to have unicode input you need to:
- set your OS input method to UNICODE if needed
- enable unicode in your makefile
- copy the action_function from
keyboard/planck/keymaps/unicode/unicode.c to your keymap.c
set the target OS method in your keymap.c: void matrix_init_user() {
set_unicode_mode(UC_OSX); } you can then switch when you want with:
set_unicode_mode(UC_OSX); set_unicode_mode(UC_LNX);
set_unicode_mode(UC_WIN);
put some unicode codes in your keymap like so: UC(0x0061)
I did change the bit mask in quantum/keymap_common.c and .h
I’m afraid we will need uint32 to get a total support for all unicode
tables or relocate the handler as @mbarkhau did.
* rearranges keycode values, hooks-up unicode
* removes extra lalt ref
* adds unicode shortcuts and example
fauxpark
XScorpion2
Brice Figureau
Mike Roberts
Drashna Jaelre
zvecr
Wilba6582
James Churchill
Chris Lewis
ishtob
skullY
Anthony
Rockman18
mtei
Jack Humbert
Joe Wasson
Joe Wasson
That-Canadian
Max Audron
Wilba6582
yiancar
Martin Sandiford
fredizzimo
scauligi
Michael Kaylan
Kenneth Aloysius
Balz Guenat
Zach Richard
Colin T.A. Gray
Sebastian Kaim
Jeremy Cowgar
skullydazed
Fredric Silberberg
Shayne Holmes
rai-suta
jamesofarrell
Travis La Marr
Gabriel Young
Priyadi Iman Nurcahyo
SjB
Ofer Plesser
Gergely Nagy
IBNobody
IBNobody
Wojciech Siewierski
Pavlos Vinieratos
Smilliam
TerryMathews
Jack & Erez
Eric Tang
Erez Zukerman
purpleP