0fa217a5b7
* Align ChibiOS I2C defs with other drivers * Update keyboards/xelus/valor_frl_tkl/config.h Co-authored-by: Ryan <fauxpark@gmail.com> Co-authored-by: Ryan <fauxpark@gmail.com> |
||
|---|---|---|
| .. | ||
| chconf.h | ||
| config.h | ||
| f411.c | ||
| f411.h | ||
| halconf.h | ||
| mcuconf.h | ||
| readme.md | ||
| rules.mk | ||
readme.md
Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball
-
VBUS mod, using PB10
-
Split Hand Pin, using PC14
-
Full Duplex Serial/USART using PA3 and PA4 on USART2
-
PWM Audio using PB1 and TIM3 and GPT on TIM4
-
PWM RGB using PA1 TIM5
-
pmw3360 sensor sharing PA5-PA7 on SPI1, with B0 as CS pin
-
8KB SPI EEPROM chip sharing PA5-PA7 on SPI1 with PA4 as CS pin
-
Encoder using PA10 and PA12
-
SSD1306 OLED display (128x64) using PB8-PB9 on I2C1
-
Keyboard Maintainer: Drashna Jael're
-
Hardware Supported: Design files, WeAct BlackPill (F411), PMW3360 Optical Sensor
Make example for this keyboard (after setting up your build environment):
make handwired/tractyl_manuform/5x6_right/f411:default
Flashing example for this keyboard:
make handwired/tractyl_manuform/5x6_right/f411:default:flash
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.