tudattr/qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2e266c7ec1
qmk_firmware/keyboards/geekboards/macropad_v2
History
Ryan a8d440e4e0
Tidy up NKRO_ENABLE rules (#15382)
2021-12-09 16:05:44 +11:00
..
keymaps
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h Require explicit enabling of RGB Matrix modes (#15018) 2021-11-15 10:41:04 -08:00
halconf.h
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
macropad_v2.c
macropad_v2.h
mcuconf.h
readme.md
rules.mk Tidy up NKRO_ENABLE rules (#15382) 2021-12-09 16:05:44 +11:00

readme.md

geekboards/macropad_v2

Geekboards Macropad v2

8-keys macropad with CNC aluminium case, RGB LEDs for both backlight and switches, hot-swap connectors.

Keyboard Maintainer: ruddy17
Hardware Supported: Geekboards Macropad v2, STM32F072C8T6
Hardware Availability: https://geekboards.ru

Compile instruction for this keyboard (after setting up your build environment):

make geekboards/macropad_v2:via

Update firmware

Enter bootloader

  1. Press and hold leftmost button on top row (where ESC usually is)
  2. Plug in USB
  3. Keep holding the button for 3 more seconds
  4. Release the button

Alternatively:

  1. Remove bottom cover
  2. On the pcb short together two contacts labeled BOOT0
  3. Plug in USB
  4. Release BOOT0

Flash

make geekboards/macropad_v2:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.