qmk_firmware/keyboard/ergodox_ez/keymaps/algernon

algernon's layout

This is an unconventional layout for the ErgoDox EZ. For more details about the history of the layout, see my blog posts about my ErgoDox journey.

Some of the things in the layout only work when one uses Spacemacs and GNOME under Linux. Your mileage may vary.

Base layer

At its core, this is a Dvorak layout, with some minor changes (for example, - being on the left half, and on the innermost key of the bottom row on the right). The more interesting parts are how certain keys behave:

• The keys on the number row double as function keys, when held for a bit longer than an usual tap. This allows me to use the function keys without having to switch layers.
• The Shift, Alt, and Control modifiers are one-shot. When tapped, they are considered active for the next key press only. When double tapped, they toggle on, until a third, single tap sometime later. When held, they act as expected. My usual pattern is that I use these for the next keypress only, so this behaviour is perfect. If I need them held, I'll just double-tap.
• The GUI key is special, because when I double-tap it, it sends GUI + w, which pops up an application selector. It also switches to a one-shot layer, where the number row on the left half turns into app selector macros, for the most common things I usually want to switch to. Otherwise it behaves as on a normal layout.
• The ESC key also doubles as a one-shot cancel key: if tapped while any of the one-shot modifiers are in-flight (as in, single-tapped, and not expired yet), it cancels all one-shot modifiers. Otherwise it sends the usual keycode.
• The Emacs and Hun layer keys are one-shot, the 1Hand and STENO keys are toggles.
• The Lead key allows me to type in a sequence of keys, and trigger some actions:
  • LEAD u enters unicode input mode, by sending the GTK+ key sequence that does this.
  • LEAD l uses the unicode input method to enter a λ.
  • LEAD s does a lot of magic to type in a shruggie: ¯\_(ツ)_/¯
  • LEAD y types \o/.
  • LEAD w m maximises the currently focused window.
  • LEAD e makes the experimental layer the default.
  • LEAD v prints the firmware version, the keyboard and the keymap, if compiled with a QMK version that has these available.

Hungarian layer

On this layer, the accented characters are at the same position as their base variant. For some, which can have other diatribes, the long one is on top, short's on bottom. Tapping any of the accented characters takes us back to the base layer.

Emacs layer

This layer is primarily for navigating text - and for some mousing and other things, because there was space. Most of the keys should be pretty self-explanatory, except for a few:

• There are three keys on the bottom row of the left side, that change how some of the other keys - explained just below - work. The keys are for Emacs mode (the default), Terminal mode, and Traditional mode, respectively.
• The Visual mode key (the top big key on the left side) sends the v key in Emacs mode, to enter Visual mode in Spacemacs. In all other modes, it is a no-op.
• The Copy/Cut key (the bottom big key on the left side) sends the copy command on tap, the cut one when held for longer than a normal tap. The copy command is y in Emacs mode, Ctrl-Shift-c in Terminal mode, and Ctrl-c in Traditional mode. The cut command is x in Emacs mode, Ctrl-Shift-x in Terminal Mode and Ctrl-x in Traditional mode.
• The Paste/Delete key (the leftmost key on the left thumb cluster) sends the paste command on tap, the delete one when held longer than a normal tap. The paste command is p in Emacs mode, Ctrl-Shift-v in Terminal mode, and Ctrl-v in Traditional mode. The delete command is d in Emacs mode, and DEL in the other two.
• The A, I and R keys will - after sending themselves - clear the layer back to the base layer. This allows a quick escape from the layer.

One-handed layer

The one-handed layer is used in situations where the right hand is occupied, by mousing around, for example. Tapping the OTHER key switches which side is active. For the most part, keys remain in their usual position. When the right half is active, keys are mirrored to the left half.

The differences are as follows:

• The ESC key has been moved to the bottom row, so the OTHER key is easier to tap.
• Most keys on the thumb cluster now have dual uses, and these do not change when switching sides:
  • The Space/Backspace key sends Space on tap, Backspace when held for longer than a normal tap.
  • The Enter/Shift key sends Enter on short-tap, Shift on long-tap.
• The Apps/BASE key can be used to go back to the base layer, by long-tapping it. A short-tap will send the App key, as usual.

Steno layer

This is to be used with Plover, nothing really fancy here. The STENO key toggles the layer on and off, and sends the toggle command to Plover too.

Experimental layer

While using the standard Dvorak layout, I encountered a number of inconveniences, and on this layer, I am playing with ideas to make the layout feel better. Initially, it was based on Capewell-Dvorak, but that too, had shortcomings I was not happy with. So now this is something inbetween, with own observations thrown in. How it works out in the long run remains to be seen.

Building

To make my workflow easier, this layout is maintained in its own repository. To build it, you will need the QMK firmware checked out, and this repo either checked out, or symlinked to keyboard/ergodox_ez/algernon. One way to achieve that is this:

$ git clone https://github.com/jackhumbert/qmk_firmware.git
$ cd qmk_firmware/keyboard/ergodox_ez
$ git clone https://github.com/algernon/ergodox-layout.git keymaps/algernon
$ make KEYMAP=algernon

From time to time, updates may be submitted back to the QMK repository. If you are reading it there, you can build the firmware like any other firmware included with it (assuming you are in the root directory of the firmware):

$ cd keyboard/ergodox_ez
$ make KEYMAP=algernon

License

The layout, being a derivative of the original TMK firmware which is under the GPL-2+, this layout is under the GPL as well, but GPL-3+, rather than the older version.