qmk_firmware/keyboards/sofle/keymaps/michal/keymap.c

231 lines
14 KiB
C

// Copyright 2022 Michal S. (@ihatethefrench)
// SPDX-License-Identifier: GPL-2.0-only
#include QMK_KEYBOARD_H
// This specifies the layers that will be used
enum sofle_layers {
_WORKMAN,
_QWERTY,
_MIDI,
_LOWER,
_RAISE,
_ADJUST
};
// This specifies any custom keycodes I might have set
enum custom_keycodes {
KC_WORKMAN = SAFE_RANGE,
KC_QWERTY,
KC_MIDI,
KC_LOWER,
KC_RAISE,
KC_ADJUST
};
// Here the keymaps are defined in matrix form using KC_XYZ form keycodes
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
* WORKMAN
* ,-----------------------------------------. ,-----------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Prnt |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Esc | Q | D | R | W | B | | J | F | U | P | ; | Bspc |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Tab | A | S | H | T | G |-------. ,-------| Y | N | E | O | I | ' |
* |------+------+------+------+------+------| | | MUTE |------+------+------+------+------+------|
* |LShift| Z | X | M | C | V |-------| |-------| K | L | , | . | / |RShift|
* `-----------------------------------------/ / \ \-----------------------------------------'
* | LGUI | LAlt | LCTR |LOWER | /Enter / \Space \ |RAISE | RCTR | RAlt | RGUI |
* | | | | |/ / \ \ | | | | |
* `----------------------------------' '------''---------------------------'
*/
[_WORKMAN] = LAYOUT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PSCR,
KC_ESC, KC_Q, KC_D, KC_R, KC_W, KC_B, KC_J, KC_F, KC_U, KC_P, KC_SCLN, KC_BSPC,
KC_TAB, KC_A, KC_S, KC_H, KC_T, KC_G, KC_Y, KC_N, KC_E, KC_O, KC_I, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_M, KC_C, KC_V, XXXXXXX, KC_MUTE, KC_K, KC_L, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
KC_LGUI, KC_LALT, KC_LCTRL, KC_LOWER, KC_ENT, KC_SPC, KC_RAISE, KC_RCTRL, KC_RALT, KC_RGUI
),
/*
* QWERTY
* ,-----------------------------------------. ,-----------------------------------------.
* | ` | 1 | 2 | 3 | 4 | 5 | | 6 | 7 | 8 | 9 | 0 | Prnt |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Esc | Q | W | E | R | T | | Y | U | I | O | P | Bspc |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | Tab | A | S | D | F | G |-------. ,-------| H | J | K | L | ; | ' |
* |------+------+------+------+------+------| | | MUTE |------+------+------+------+------+------|
* |LShift| Z | X | C | V | B |-------| |-------| N | M | , | . | / |RShift|
* `-----------------------------------------/ / \ \-----------------------------------------'
* | LGUI | LAlt | LCTR |LOWER | /Space / \Enter \ |RAISE | RCTR | RAlt | RGUI |
* | | | | |/ / \ \ | | | | |
* `----------------------------------' '------''---------------------------'
*/
[_QWERTY] = LAYOUT(
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_PSCR,
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
KC_TAB, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, XXXXXXX, KC_MUTE, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT,
KC_LGUI, KC_LALT, KC_LCTRL, KC_LOWER, KC_SPC, KC_ENT, KC_RAISE, KC_RCTRL, KC_RALT, KC_RGUI
),
/* MIDI
* ,-----------------------------------------. ,-----------------------------------------.
* | Pnic | OCT0 | OCT1 | OCT2 | OCT3 | OCT4 | | OCT5 | OCT6 | OCT7 | | | MTOG |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | |G#/Ab |Bb/A# | |C#/Db |D#/Eb | | |F#/Gb |G#/Ab |Bb/A# | | |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | A | B | C | D | E |-------. ,-------| F | G | A | B | C | Wkmn |
* |------+------+------+------+------+------| | | |------+------+------+------+------+------|
* | | | | | TNSD | TNSU |-------| |-------| BNDD | BNDU | | | | |
* `-----------------------------------------/ / \ \-----------------------------------------'
* | | | | Susd | /OCTDN / \OCTUP \ | | | | |
* | | | | |/ / \ \ | | | | |
* `----------------------------------' '------''---------------------------'
*/
[_MIDI] = LAYOUT(
MI_ALLOFF, MI_OCT_0, MI_OCT_1, MI_OCT_2, MI_OCT_3, MI_OCT_4, MI_OCT_5, MI_OCT_6, MI_OCT_7, _______, _______, MI_TOG,
_______, MI_Gs, MI_As, _______, MI_Cs_1, MI_Ds_1, _______, MI_Fs_1, MI_Gs_1, MI_As_1, _______, _______,
_______, MI_A, MI_B, MI_C_1, MI_D_1, MI_E_1, MI_F_1, MI_G_1, MI_A_1, MI_B_1, MI_C_2, KC_WORKMAN,
_______, _______, _______, _______, MI_TRNSD, MI_TRNSU, _______, _______, MI_BENDD, MI_BENDU, _______, _______, _______, _______,
_______, _______, _______, MI_SUS, MI_OCTD, MI_OCTU, _______, _______, _______, _______
),
/* LOWER
* ,-----------------------------------------. ,-----------------------------------------.
* | | F1 | F2 | F3 | F4 | F5 | | F6 | F7 | F8 | F9 | F10 | F11 |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | | | | F12 |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | |-------. ,-------| | | | | | | |
* |------+------+------+------+------+------| | | Run |------+------+------+------+------+------|
* | | = | - | + | { | } |-------| |-------| [ | ] | | | \ | |
* `-----------------------------------------/ / \ \-----------------------------------------'
* | | | |LOWER | / / \ \ | | | | |
* | | | | |/ / \ \ | | | | |
* `----------------------------------' '------''---------------------------'
*/
[_LOWER] = LAYOUT(
_______, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_F12,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_PIPE,
_______, KC_EQL, KC_MINS, KC_PLUS, KC_LCBR, KC_RCBR, _______, LALT(KC_F2), KC_LBRC, KC_RBRC, _______, _______, KC_BSLS, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
),
/* RAISE
* ,----------------------------------------. ,-----------------------------------------.
* | | | | | | | | | | | | | ASTG |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | | | | | Up | | | Del |
* |------+------+------+------+------+------| |------+------+------+------+------+------|
* | | | | | | |-------. ,-------| | Left | Down | Rght | | Wkmn |
* |------+------+------+------+------+------| | | |------+------+------+------+------+------|
* | | | | Midi | | |-------| |-------| | | Home | End | | Qwrt |
* `-----------------------------------------/ / \ \-----------------------------------------'
* | | | | | / / \ \ |RAISE | | | |
* | | | | |/ / \ \ | | | | |
* `----------------------------------' '------''---------------------------'
*/
[_RAISE] = LAYOUT(
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_ASTG,
_______, _______, _______, _______, _______, _______, _______, _______, KC_UP, _______, _______, KC_DEL,
_______, _______, _______, _______, _______, _______, _______, KC_LEFT, KC_DOWN, KC_RGHT, _______, KC_WORKMAN,
_______, _______, _______, KC_MIDI, _______, _______, _______, _______, _______, _______, KC_HOME, KC_END, _______, KC_QWERTY,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)};
// This section only compiles if OLED_ENABLE is set to `yes` in rules.mk
#ifdef OLED_ENABLE
// Defining my custom text to draw to the screen :)
static void oled_screen(void) {
oled_write_ln_P(PSTR(""), false);
oled_write_ln_P(PSTR(">nix "), false);
oled_write_ln_P(PSTR(">rust"), false);
oled_write_ln_P(PSTR(">hs &"), false);
oled_write_ln_P(PSTR(">rum"), false);
oled_write_ln_P(PSTR(""), false);
oled_write_ln_P(PSTR(" . ."), false);
oled_write_ln_P(PSTR(" u "), false);
oled_write_ln_P(PSTR(" d"), false);
oled_write_ln_P(PSTR(""), false);
oled_write_ln_P(PSTR("mchal"), false);
}
// Set correct rotation so the text doesn't end up sideways
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
if (!is_keyboard_master()) {
return OLED_ROTATION_270;
}
return rotation;
}
// I only draw to the right screen because I accidentally
// burned the left one with a soldering iron. Oops.
bool oled_task_user(void) {
if (!is_keyboard_master()) {
oled_screen();
}
return false;
}
#endif
// This section defines custom keycodes, which I use to manage layers
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
switch (keycode) {
case KC_QWERTY:
if (record->event.pressed) {
set_single_persistent_default_layer(_QWERTY);
}
return false;
case KC_WORKMAN:
if (record->event.pressed) {
set_single_persistent_default_layer(_WORKMAN);
}
return false;
case KC_MIDI:
if (record->event.pressed) {
set_single_persistent_default_layer(_MIDI);
}
return false;
case KC_LOWER:
if (record->event.pressed) {
layer_on(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_LOWER);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
case KC_RAISE:
if (record->event.pressed) {
layer_on(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
} else {
layer_off(_RAISE);
update_tri_layer(_LOWER, _RAISE, _ADJUST);
}
return false;
}
return true;
}
// This section only compiles if ENCODER_ENABLE is set to `yes` in rules.mk
#ifdef ENCODER_ENABLE
// This section is like the keymap matrix, but for rotary encoders
// My left encoder is currently not working, so I'm using Layers to cope :')
const uint16_t PROGMEM encoder_map[][NUM_ENCODERS][2] = {
[_WORKMAN] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(KC_VOLD, KC_VOLU )},
[_QWERTY] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(KC_VOLD, KC_VOLU )},
[_LOWER] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(KC_MS_WH_UP, KC_MS_WH_DOWN)},
[_RAISE] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______ )},
[_ADJUST] = { ENCODER_CCW_CW(_______, _______), ENCODER_CCW_CW(_______, _______ )},
};
#endif