4d9b11af14
* Remove unnecessary IS_COMMAND definition in clueboard/66/rev4 * Replace keyboard_report->mods with get_mods() in IS_COMMAND definitions * Update docs to use get_mods() instead of keyboard_report->mods * Replace keyboard_report->mods with get_mods() in tmk_core/protocol/usb_hid/test For some reason, this occurrence used KB_LSHIFT and KB_RSHIFT, which don't exist * Replace keyboard_report->mods with get_mods() in Massdrop keyboards (as per @patrickmt) |
||
|---|---|---|
| .. | ||
| keymaps | ||
| util | ||
| 190hotfix.sh | ||
| config.h | ||
| ergodox_ez.c | ||
| ergodox_ez.h | ||
| info.json | ||
| matrix.c | ||
| readme.md | ||
| rules.mk | ||
readme.md
ErgoDox EZ
The Ez uses the Teensy Loader.
Linux users need to modify udev rules as described on the Teensy
Linux page. Some distributions provide a binary, maybe called
teensy-loader-cli.
To flash the firmware:
-
Build the firmware with
make <keyboardname>:<keymapname>, for examplemake ergodox_ez:default -
This will result in a hex file called
ergodox_ez_keymapname.hex, e.g.ergodox_ez_default.hex -
Start the teensy loader.
-
Load the .hex file into it.
-
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
-
Click the button in the Teensy app to download the firmware.
See also video demonstration using Teensy in auto mode.
To flash with ´teensy-loader-cli´:
-
Build the firmware with
make keymapname, for examplemake default -
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
-
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.
Settings
You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.