qmk_firmware/keyboards/atreus/feather
Ryan 7d685956cc
Rename `AdafruitBLE` to `BluefruitLE` (#16127)
2022-01-30 17:29:42 +00:00
..
config.h
feather.c
feather.h
readme.md
rules.mk

readme.md

Bluetreus - a conversion of an Atreus to use a Bluetooth microcontroller

I have created a keymap for this with Bluetooth control on layer 2 so that you can switch the keyboard between auto, USB only, and Bluetooth only. I'm working on fixing turning on auto by default, but have still not succeeded.

To build it and flash it, do:

make atreus/feather:clash:flash

Wiring it up

Physically, SDA to pin 13 on the new board are connected to what 9-1 were connected to on the old board. Pin 0 from the old board is brought over to the other side with a jumper wire to pin a2. TX, RX, A5, A4, A3 on the new board connect to what a0 to 12 connected to on the old board. GND attaches to g. You have to bend some of the pins at about a 45 degree angle to make them line up. Here's a side view of what the most bent pins look like: Side View Here's a top view, USB port down, wireless antenna up. Note: the USB port orientation is opposite what it used to be. Top View

New board:

This is an Adafruit Feather BLE

QMK Screen Print Feather SCREEN QMK REF
D1 SDA RADIO dfu
D0 SCL 1/TX D3
C6 5 0/RX D2
D7 6 MISO B3/Blue
B5 9 MOSI B2/Blue
B6 10 SCK B1/Blue
B7 11 A5 F0
D6 12 a4 F1
C7 13 a3 F4
usb a2 F5
e0 a1 F6
bat a0
Battery GND
Connector ARf
USB PORT
v v RST

Old board:

This is an A Star, non-flipped

QMK Scrn A Scrn QMK
b5 9 USB a0 F7
b4 8 port a1 F6
e6 7 10 B6
d7 6 11 B7
c6 5 12 D6
d4 4 rst RST
d0 3 3v x
d1 2 5v x
d3 1 g G
d2 0 v x