9cda36238f
* Initial version of the Ergodox EZ Bépo keymap, TypeMatrix style. * Update the readme file and add some handling of the keyboard LEDs. * Toggling layer requires 2 taps. * Remove a constant as it conflicts with an earier definition. * Fix a typo in a type name. * Fix the arrow layer that had a bad number. * Second main version of my bepo keymap, after the tests of the first one. * Fix the triggering of the function layer and the handling of the LED. * Reduce the shining of the LEDs. * Fix the swap layer (that required a keypress on the other side of the keyboard to be deactivated). * Duplicate some of the mouse button for easy access. * Move some of the secondary functions out of the center keys. * Slightly slow down the mouse and mouse wheel. * Update the comment and readme.md for the V2 of the keymap. * Invert button 2 and 3 of the mouse. Really fix the SWAP layer. * Test with the right alt modifier added as secondary function (on hold) of the space keys. The right alt key becomes a left alt one. * Add specific shift/ctrl for the FN layer; move some mouse keys around to help with that. * Remove one FN modifier-on-hold key that was not useful. * Duplicate the FN layer inside the MOUSE layer. * Add support (not tested yet) for macro recording and play on a single key as a tap dance. * Allow to stop recording the macro by tapping once on the macro key (still un-tested). * Add support for macro recording using some tap dance. * shorten a comment. * Reinstate the FN toggle on the percent key (so that there is an FN toggle on the right-hand-side). * Fix some comments and update the link to the most up-to-date image. * Small fix to the keymap images.
ErgoDox EZ
The Ez uses the Teensy Loader.
Linux users need to modify udev rules as described on the Teensy
Linux page. Some distributions provide a binary, maybe called
teensy-loader-cli.
To flash the firmware:
-
Build the firmware with
make keymapname, for examplemake default -
This will result in a hex file called
ergodox_ez_keymapname.hex, e.g.ergodox_ez_default.hex -
Start the teensy loader.
-
Load the .hex file into it.
-
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.
-
Click the button in the Teensy app to download the firmware.
To flash with ´teensy-loader-cli´:
-
Build the firmware with
make keymapname, for examplemake default -
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
-
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.
Settings
You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.