qmk_firmware/keyboards/iron180
Ryan 9dcd03b6ca
Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956)
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
2021-06-08 19:48:46 +10:00
..
keymaps
chconf.h
config.h
halconf.h
info.json
iron180.c
iron180.h
mcuconf.h
readme.md
rules.mk

readme.md

Iron180 QMK folder

Introduction

This is the QMK Firmware repository for the Iron180 PCB, a keyboard designed by Smith and Rune and PCB designed by Gondolindrim.

The Iron180 PCB is a F13 TKL PCB with ALPS switches support. It also supports in-switch single-color LEDs and a multi-layout design for default or 7U bottom row, ISO layout, split backspace and right shift.

As of November 2020, the only way to obtain an Iron180 was through the Group Buy which is already over and all spots were filled.

How to compile

After setting up your build environment, you can compile the Iron180 default keymap by using:

make iron180:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.