94 lines
2.7 KiB
C
94 lines
2.7 KiB
C
#ifndef usb_serial_h__
|
|
#define usb_serial_h__
|
|
|
|
#include <stdint.h>
|
|
|
|
void usb_init(void); // initialize everything
|
|
uint8_t usb_configured(void); // is the USB port configured
|
|
|
|
int8_t usb_keyboard_press(uint8_t key, uint8_t modifier);
|
|
int8_t usb_keyboard_send(void);
|
|
extern uint8_t keyboard_modifier_keys;
|
|
extern uint8_t keyboard_keys[6];
|
|
extern volatile uint8_t keyboard_leds;
|
|
|
|
int8_t usb_debug_putchar(uint8_t c); // transmit a character
|
|
void usb_debug_flush_output(void); // immediately transmit any buffered output
|
|
#define USB_DEBUG_HID
|
|
|
|
|
|
|
|
|
|
// Everything below this point is only intended for usb_serial.c
|
|
#ifdef USB_SERIAL_PRIVATE_INCLUDE
|
|
#include <avr/io.h>
|
|
#include <avr/pgmspace.h>
|
|
#include <avr/interrupt.h>
|
|
|
|
#define EP_TYPE_CONTROL 0x00
|
|
#define EP_TYPE_BULK_IN 0x81
|
|
#define EP_TYPE_BULK_OUT 0x80
|
|
#define EP_TYPE_INTERRUPT_IN 0xC1
|
|
#define EP_TYPE_INTERRUPT_OUT 0xC0
|
|
#define EP_TYPE_ISOCHRONOUS_IN 0x41
|
|
#define EP_TYPE_ISOCHRONOUS_OUT 0x40
|
|
|
|
#define EP_SINGLE_BUFFER 0x02
|
|
#define EP_DOUBLE_BUFFER 0x06
|
|
|
|
#define EP_SIZE(s) ((s) == 64 ? 0x30 : \
|
|
((s) == 32 ? 0x20 : \
|
|
((s) == 16 ? 0x10 : \
|
|
0x00)))
|
|
|
|
#define MAX_ENDPOINT 4
|
|
|
|
#define LSB(n) (n & 255)
|
|
#define MSB(n) ((n >> 8) & 255)
|
|
|
|
#if defined(__AVR_AT90USB162__)
|
|
#define HW_CONFIG()
|
|
#define PLL_CONFIG() (PLLCSR = ((1<<PLLE)|(1<<PLLP0)))
|
|
#define USB_CONFIG() (USBCON = (1<<USBE))
|
|
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
|
|
#elif defined(__AVR_ATmega32U4__)
|
|
#define HW_CONFIG() (UHWCON = 0x01)
|
|
#define PLL_CONFIG() (PLLCSR = 0x12)
|
|
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
|
|
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
|
|
#elif defined(__AVR_AT90USB646__)
|
|
#define HW_CONFIG() (UHWCON = 0x81)
|
|
#define PLL_CONFIG() (PLLCSR = 0x1A)
|
|
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
|
|
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
|
|
#elif defined(__AVR_AT90USB1286__)
|
|
#define HW_CONFIG() (UHWCON = 0x81)
|
|
#define PLL_CONFIG() (PLLCSR = 0x16)
|
|
#define USB_CONFIG() (USBCON = ((1<<USBE)|(1<<OTGPADE)))
|
|
#define USB_FREEZE() (USBCON = ((1<<USBE)|(1<<FRZCLK)))
|
|
#endif
|
|
|
|
// standard control endpoint request types
|
|
#define GET_STATUS 0
|
|
#define CLEAR_FEATURE 1
|
|
#define SET_FEATURE 3
|
|
#define SET_ADDRESS 5
|
|
#define GET_DESCRIPTOR 6
|
|
#define GET_CONFIGURATION 8
|
|
#define SET_CONFIGURATION 9
|
|
#define GET_INTERFACE 10
|
|
#define SET_INTERFACE 11
|
|
// HID (human interface device)
|
|
#define HID_GET_REPORT 1
|
|
#define HID_GET_IDLE 2
|
|
#define HID_GET_PROTOCOL 3
|
|
#define HID_SET_REPORT 9
|
|
#define HID_SET_IDLE 10
|
|
#define HID_SET_PROTOCOL 11
|
|
// CDC (communication class device)
|
|
#define CDC_SET_LINE_CODING 0x20
|
|
#define CDC_GET_LINE_CODING 0x21
|
|
#define CDC_SET_CONTROL_LINE_STATE 0x22
|
|
#endif
|
|
#endif
|