qmk_firmware/keyboards/ergodox_ez
Drashna Jaelre 6cf574396a [Keyboard] Update default keymaps to use layer_state_t (#7444)
* Update default keymaps to use `layer_state_t`

* Convert binon32 as get_highest_layer in default keymaps
2019-11-21 22:40:29 -08:00
..
keymaps [Keyboard] Update default keymaps to use layer_state_t (#7444) 2019-11-21 22:40:29 -08:00
util
190hotfix.sh
config.h Move Ergodox EZ RGB Light code to custom driver (#7309) 2019-11-14 12:00:51 -08:00
ergodox_ez.c
ergodox_ez.h
info.json
led_i2c.c Move Ergodox EZ RGB Light code to custom driver (#7309) 2019-11-14 12:00:51 -08:00
matrix.c
post_config.h Move Ergodox EZ RGB Light code to custom driver (#7309) 2019-11-14 12:00:51 -08:00
readme.md
rules.mk Move Ergodox EZ RGB Light code to custom driver (#7309) 2019-11-14 12:00:51 -08:00

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

  • Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default

  • This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex

  • Start the teensy loader.

  • Load the .hex file into it.

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.

  • Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

  • Build the firmware with make keymapname, for example make default

  • Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´

  • Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.