qmk_firmware/keyboards/naked48/keymaps/default/keymap.c

136 lines
6.8 KiB
C

#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
#ifdef RGBLIGHT_ENABLE
//Following line allows macro to read current RGB settings
extern rgblight_config_t rgblight_config;
#endif
extern uint8_t is_master;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
enum layer_number {
_QWERTY = 0,
_LOWER,
_RAISE,
_ADJUST,
};
enum custom_keycodes {
LOWER = SAFE_RANGE,
RAISE,
ADJUST,
RGBRST
};
// Layer Mode aliases
#define _____ KC_TRNS
#define XXXXX KC_NO
#define KC_SNUBS S(KC_NUBS)
#define KC_SNUHS S(KC_NUHS)
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
//,-----------------------------------------------------| |-----------------------------------------------------.
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_ESC, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_ENT,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
ADJUST,KC_LCTRL, KC_LALT, KC_LGUI, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP,KC_RIGHT
//`------------------------------------------------------------------------------------------------------------'
),
[_LOWER] = LAYOUT(
//,-----------------------------------------------------| |-----------------------------------------------------.
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR,KC_LPRN, KC_RPRN, KC_DEL,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
_____, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,KC_SNUHS,KC_SNUBS, _____, _____, _____,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
_____, _____, _____, _____, _____, _____, _____, _____, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY
//`------------------------------------------------------------------------------------------------------------'
),
[_RAISE] = LAYOUT(
//,-----------------------------------------------------| |-----------------------------------------------------.
KC_TILD, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_DEL,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
_____, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_NUHS, KC_NUBS, _____, _____, _____,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
_____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____
//`------------------------------------------------------------------------------------------------------------'
),
[_ADJUST] = LAYOUT( /* Base */
//,-----------------------------------------------------| |-----------------------------------------------------.
_____, RESET, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, _____,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
_____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RGB_TOG, RGB_MOD, XXXXX,LCA(KC_DEL),LALT(KC_PSCR),KC_PSCR,
//|--------+--------+--------+--------+--------+--------| |--------+--------+--------+--------+--------+--------|
_____, XXXXX, XXXXX, XXXXX, XXXXX, XXXXX, RGB_VAD, RGB_VAI, RGB_HUD, RGB_HUI, RGB_SAD, RGB_SAI,
//|--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------+--------|
_____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____, _____
//`------------------------------------------------------------------------------------------------------------'
)
};
static inline void update_change_layer(bool pressed, uint8_t layer1, uint8_t layer2, uint8_t layer3) {
pressed ? layer_on(layer1) : layer_off(layer1);
IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2) ? layer_on(layer3) : layer_off(layer3);
}
int RGB_current_mode;
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
bool result = false;
switch (keycode) {
case LOWER:
update_change_layer(record->event.pressed, _LOWER, _RAISE, _ADJUST);
break;
case RAISE:
update_change_layer(record->event.pressed, _RAISE, _LOWER, _ADJUST);
break;
#ifdef RGBLIGHT_ENABLE
case RGB_MOD:
if (record->event.pressed) {
rgblight_mode(RGB_current_mode);
rgblight_step();
RGB_current_mode = rgblight_config.mode;
}
break;
case RGBRST:
if (record->event.pressed) {
eeconfig_update_rgblight_default();
rgblight_enable();
RGB_current_mode = rgblight_config.mode;
}
break;
#endif
default:
result = true;
break;
}
return result;
}
void matrix_init_user(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
}