History

James Churchill 37932c293c Next set of split_common changes (#4974 ) * Update split_common to use standard i2c drivers * Eliminate RGB_DIRTY/BACKLIT_DIRTY * Fix avr i2c_master error handling * Fix i2c_slave addressing * Remove unneeded timeout on i2c_stop() * Fix RGB I2C transfers * Remove incorrect comment		2019-03-12 10:23:28 -07:00
..
keymaps	[Keymap] use steno mode from base (#5220 )	2019-02-28 12:33:02 -08:00
util	Remove empty fn_actions[]	2019-01-11 18:32:43 -08:00
190hotfix.sh
config.h	Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955 )	2019-01-27 00:28:40 -08:00
ergodox_ez.c	Next set of split_common changes (#4974 )	2019-03-12 10:23:28 -07:00
ergodox_ez.h	Merge pull request #3229 from qmk/hf/shinydox	2018-07-03 14:06:36 -04:00
info.json
matrix.c	Next set of split_common changes (#4974 )	2019-03-12 10:23:28 -07:00
readme.md
rules.mk	Fix i2c_master.d listed more than once warning	2018-11-18 08:57:51 -08:00

ErgoDox EZ

The Ez uses the Teensy Loader.

Linux users need to modify udev rules as described on the Teensy Linux page. Some distributions provide a binary, maybe called teensy-loader-cli.

To flash the firmware:

Build the firmware with make <keyboardname>:<keymapname>, for example make ergodox_ez:default
This will result in a hex file called ergodox_ez_keymapname.hex, e.g. ergodox_ez_default.hex
Start the teensy loader.
Load the .hex file into it.
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corner.
Click the button in the Teensy app to download the firmware.

See also video demonstration using Teensy in auto mode.

To flash with ´teensy-loader-cli´:

Build the firmware with make keymapname, for example make default
Run ´<path/to/>teensy_loader_cli -mmcu=atmega32u4 -w ergodox_ez_.hex´
Press the Reset button by inserting a paperclip gently into the reset hole in the top right corder.

Settings

You may want to enable QMK_KEYS_PER_SCAN because the Ergodox has a relatively slow scan rate.