qmk_firmware/keyboards/eternal_keypad
Joel Challis c6ad38e79f
RESET -> QK_BOOT default keymaps (#17939)
2022-08-07 02:23:58 +01:00
..
keymaps RESET -> QK_BOOT default keymaps (#17939) 2022-08-07 02:23:58 +01:00
config.h Move keyboard USB IDs and strings to data driven: E (#17815) 2022-07-30 17:23:55 +10:00
eternal_keypad.c
eternal_keypad.h
info.json Move keyboard USB IDs and strings to data driven: E (#17815) 2022-07-30 17:23:55 +10:00
readme.md
rules.mk Add rgb underglow support and change vendor_id (#17719) 2022-07-20 00:24:10 +01:00

readme.md

eternal_keypad

eternal_keypad

A 36 key gaming keypad that can be assembled and configured for both left and right handed mouse users.

  • Keyboard Maintainer: duckyb
  • Hardware Supported: ETERNAL Keypad
  • Hardware Availability: Open Source, files available on gitHub

Make example for this keyboard (after setting up your build environment):

make eternal_keypad:default

Flashing example for this keyboard:

make eternal_keypad:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,1) in the matrix (the top left key or Escape) and plug in the keyboard
  • Keycode in layout: Press the key mapped to RESET if it is available (activated by holding the lower right key and tapping the lower left key)
  • Physical reset button: Briefly sort the pads labeled "RST" and "GND" on the micro-controller