293 lines
10 KiB
C
293 lines
10 KiB
C
#include QMK_KEYBOARD_H
|
|
#include "uzu42.h"
|
|
#ifdef PROTOCOL_LUFA
|
|
#include "lufa.h"
|
|
#include "split_util.h"
|
|
#endif
|
|
#ifdef SSD1306OLED
|
|
#include "ssd1306.h"
|
|
#endif
|
|
|
|
|
|
#ifdef RGBLIGHT_ENABLE
|
|
#include <stdio.h>
|
|
//Following line allows macro to read current RGB settings
|
|
extern rgblight_config_t rgblight_config;
|
|
#endif
|
|
|
|
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
|
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
|
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
|
// entirely and just use numbers.
|
|
enum layer_number {
|
|
_QWERTY = 0,
|
|
_LOWER,
|
|
_RAISE,
|
|
_ADJUST,
|
|
};
|
|
|
|
enum custom_keycodes {
|
|
QWERTY = SAFE_RANGE,
|
|
LOWER,
|
|
RAISE,
|
|
ADJUST,
|
|
RGBRST
|
|
};
|
|
|
|
#define KC_CTES CTL_T(KC_ESC)
|
|
#define KC_SFSP SFT_T(KC_SPC)
|
|
#define KC_ALBS ALT_T(KC_BSPC)
|
|
|
|
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|
[_QWERTY] = LAYOUT(
|
|
//,---------------------------------------. ,---------------------------------------.
|
|
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P,
|
|
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
|
|
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_ENT,
|
|
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
|
|
KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,KC_COMM, KC_DOT,KC_SLSH,
|
|
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
|
KC_LSFT, KC_SPC,KC_LALT,KC_LGUI, LOWER,KC_CTES, KC_SFSP, RAISE,KC_ALBS,KC_RCTL,KC_LGUI,XXXXXXX
|
|
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
|
),
|
|
|
|
[_LOWER] = LAYOUT(
|
|
//,---------------------------------------. ,---------------------------------------.
|
|
KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0,
|
|
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
|
|
KC_TAB,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, KC_LEFT,KC_DOWN, KC_UP,KC_RGHT, KC_ENT,
|
|
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
|
|
KC_LCTL, KC_SPC,KC_LSFT,KC_LALT, KC_DEL, KC_BSPC,KC_HOME, KC_END,XXXXXXX,XXXXXXX,
|
|
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______
|
|
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
|
),
|
|
|
|
[_RAISE] = LAYOUT(
|
|
//,---------------------------------------. ,---------------------------------------.
|
|
KC_EXLM, KC_AT,KC_HASH, KC_DLR,KC_PERC, KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,KC_RPRN,
|
|
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
|
|
KC_TAB,KC_UNDS,KC_PLUS,KC_PIPE,KC_TILD, KC_COLN,KC_DQUO, KC_GT,KC_LCBR,KC_RCBR,
|
|
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
|
|
KC_LCTL,KC_MINS, KC_EQL,KC_BSLS, KC_GRV, KC_SCLN,KC_QUOT, KC_LT,KC_LBRC,KC_RBRC,
|
|
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______
|
|
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
|
),
|
|
|
|
[_ADJUST] = LAYOUT(
|
|
//,---------------------------------------. ,---------------------------------------.
|
|
KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10,
|
|
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
|
|
KC_F11, KC_F12, QK_BOOT,KC_PSCR, KC_INS, RGB_TOG,RGB_HUI,RGB_SAI,RGB_VAI,XXXXXXX,
|
|
//|-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------|
|
|
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, RGB_MOD,RGB_HUD,RGB_SAD,RGB_VAD,RGBRST,
|
|
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
|
_______,_______,_______,_______,_______,_______, _______,_______,_______,_______,_______,_______
|
|
//|-------+-------+-------+-------+-------+-------| |-------+-------+-------+-------+-------+-------|
|
|
)
|
|
};
|
|
|
|
int RGB_current_mode;
|
|
|
|
// Setting ADJUST layer RGB back to default
|
|
void update_tri_layer_RGB(uint8_t layer1, uint8_t layer2, uint8_t layer3) {
|
|
if (IS_LAYER_ON(layer1) && IS_LAYER_ON(layer2)) {
|
|
layer_on(layer3);
|
|
} else {
|
|
layer_off(layer3);
|
|
}
|
|
}
|
|
|
|
void matrix_init_user(void) {
|
|
#ifdef RGBLIGHT_ENABLE
|
|
RGB_current_mode = rgblight_config.mode;
|
|
#endif
|
|
}
|
|
|
|
//SSD1306 OLED update loop, make sure to enable OLED_ENABLE=yes in rules.mk
|
|
#ifdef OLED_ENABLE
|
|
|
|
#define L_BASE 0
|
|
#define L_LOWER (1 << 1)
|
|
#define L_RAISE (1 << 2)
|
|
#define L_ADJUST (1 << 3)
|
|
#define L_ADJUST_TRI (L_ADJUST | L_RAISE | L_LOWER)
|
|
|
|
char layer_state_str[24];
|
|
|
|
const char *read_layer_state(void) {
|
|
switch (layer_state)
|
|
{
|
|
case L_BASE:
|
|
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Default");
|
|
break;
|
|
case L_RAISE:
|
|
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise");
|
|
break;
|
|
case L_LOWER:
|
|
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower");
|
|
break;
|
|
case L_ADJUST:
|
|
case L_ADJUST_TRI:
|
|
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust");
|
|
break;
|
|
default:
|
|
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state);
|
|
}
|
|
|
|
return layer_state_str;
|
|
}
|
|
|
|
const char *read_logo(void) {
|
|
static char logo[] = {
|
|
0x80, 0x81, 0x82, 0x83, 0x84, 0x85, 0x86, 0x87, 0x88, 0x89, 0x8a, 0x8b, 0x8c, 0x8d, 0x8e, 0x8f, 0x90, 0x91, 0x92, 0x93, 0x94,
|
|
0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf, 0xb0, 0xb1, 0xb2, 0xb3, 0xb4,
|
|
0xc0, 0xc1, 0xc2, 0xc3, 0xc4, 0xc5, 0xc6, 0xc7, 0xc8, 0xc9, 0xca, 0xcb, 0xcc, 0xcd, 0xce, 0xcf, 0xd0, 0xd1, 0xd2, 0xd3, 0xd4,
|
|
0};
|
|
return logo;
|
|
}
|
|
|
|
char keylog_str[24] = {};
|
|
char keylogs_str[21] = {};
|
|
int keylogs_str_idx = 0;
|
|
|
|
const char code_to_name[60] = {
|
|
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
|
|
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
|
|
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
|
|
'1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
|
|
'R', 'E', 'B', 'T', ' ', ' ', ' ', ' ', ' ', ' ',
|
|
' ', ';', '\'', ' ', ',', '.', '/', ' ', ' ', ' '};
|
|
|
|
void set_keylog(uint16_t keycode, keyrecord_t *record) {
|
|
char name = ' ';
|
|
if (keycode < 60) {
|
|
name = code_to_name[keycode];
|
|
}
|
|
|
|
// update keylog
|
|
snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
|
|
record->event.key.row, record->event.key.col,
|
|
keycode, name);
|
|
|
|
// update keylogs
|
|
if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
|
|
keylogs_str_idx = 0;
|
|
for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
|
|
keylogs_str[i] = ' ';
|
|
}
|
|
}
|
|
|
|
keylogs_str[keylogs_str_idx] = name;
|
|
keylogs_str_idx++;
|
|
}
|
|
|
|
const char *read_keylog(void) {
|
|
return keylog_str;
|
|
}
|
|
|
|
const char *read_keylogs(void) {
|
|
return keylogs_str;
|
|
}
|
|
|
|
oled_rotation_t oled_init_user(oled_rotation_t rotation) {
|
|
if (!is_keyboard_master())
|
|
return OLED_ROTATION_180; // flips the display 180 degrees if offhand
|
|
return rotation;
|
|
}
|
|
|
|
bool oled_task_user(void) {
|
|
if (is_keyboard_master()) {
|
|
// If you want to change the display of OLED, you need to change here
|
|
oled_write_ln(read_layer_state(), false);
|
|
oled_write_ln(read_keylog(), false);
|
|
oled_write_ln(read_keylogs(), false);
|
|
//oled_write_ln(read_mode_icon(keymap_config.swap_lalt_lgui), false);
|
|
//oled_write_ln(read_host_led_state(), false);
|
|
//oled_write_ln(read_timelog(), false);
|
|
} else {
|
|
oled_write(read_logo(), false);
|
|
}
|
|
return false;
|
|
}
|
|
#endif // OLED_ENABLE
|
|
|
|
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
|
if (record->event.pressed) {
|
|
#ifdef OLED_ENABLE
|
|
set_keylog(keycode, record);
|
|
#endif
|
|
// set_timelog();
|
|
}
|
|
|
|
switch (keycode) {
|
|
case QWERTY:
|
|
if (record->event.pressed) {
|
|
set_single_persistent_default_layer(_QWERTY);
|
|
}
|
|
return false;
|
|
break;
|
|
case LOWER:
|
|
if (record->event.pressed) {
|
|
layer_on(_LOWER);
|
|
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
|
} else {
|
|
layer_off(_LOWER);
|
|
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
|
}
|
|
return false;
|
|
break;
|
|
case RAISE:
|
|
if (record->event.pressed) {
|
|
layer_on(_RAISE);
|
|
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
|
} else {
|
|
layer_off(_RAISE);
|
|
update_tri_layer_RGB(_LOWER, _RAISE, _ADJUST);
|
|
}
|
|
return false;
|
|
break;
|
|
case ADJUST:
|
|
if (record->event.pressed) {
|
|
layer_on(_ADJUST);
|
|
} else {
|
|
layer_off(_ADJUST);
|
|
}
|
|
return false;
|
|
break;
|
|
case RGB_MOD:
|
|
#ifdef RGBLIGHT_ENABLE
|
|
if (record->event.pressed) {
|
|
rgblight_mode(RGB_current_mode);
|
|
rgblight_step();
|
|
RGB_current_mode = rgblight_config.mode;
|
|
}
|
|
#endif
|
|
return false;
|
|
break;
|
|
case RGBRST:
|
|
#ifdef RGBLIGHT_ENABLE
|
|
if (record->event.pressed) {
|
|
eeconfig_update_rgblight_default();
|
|
rgblight_enable();
|
|
RGB_current_mode = rgblight_config.mode;
|
|
}
|
|
#endif
|
|
break;
|
|
}
|
|
return true;
|
|
}
|
|
|
|
#ifdef RGBLIGHT_ENABLE
|
|
|
|
char rbf_info_str[24];
|
|
const char *read_rgb_info(void) {
|
|
|
|
snprintf(rbf_info_str, sizeof(rbf_info_str), "%s %2d h%3d s%3d v%3d",
|
|
rgblight_config.enable ? "on" : "- ", rgblight_config.mode,
|
|
rgblight_config.hue, rgblight_config.sat, rgblight_config.val);
|
|
return rbf_info_str;
|
|
}
|
|
#endif
|