qmk_firmware/keyboards/geonworks/frogmini
James Young 083ac400e2
GeonWorks Frog Mini Soldered Layout Rework (#18308)
2022-09-14 08:59:17 -07:00
..
fmh
fms GeonWorks Frog Mini Soldered Layout Rework (#18308) 2022-09-14 08:59:17 -07:00
readme.md

readme.md

GeonWorks Frog Mini PCB firmware

FM_image

The Frog Mini is a 60% keyboard designed by GeonWorks, with PCB by Gondolindrim.

Two PCB variants are offered: FM-S (solderable) and FM-H (hotswap with Kailh sockets).

How to flash

Enter bootloader

Release Alpha:

The DFU state in the bootloader can be accessed in 2 ways:

  • Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the back of the PCB
  • Keycode in layout: press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Release Beta:

The DFU state in the bootloader can be accessed in 3 ways:

  • Bootmagic reset: hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: press the button on the back of the PCB, for at least five seconds
  • Keycode in layout: press the key mapped to QK_BOOT if it is available (ESC key at layer 1 in the default layout)

Compile firmware

FM-S (solderable)

After accessing the DFU state in your PCB, build the default layout using:

make geonworks/frogmini/fms:default

FM-H (hotswap)

After accessing the DFU state in your PCB, build the default layout using:

make geonworks/frogmini/fmh:default

Then download the resulting binary *bin file using dfu-util or QMK Toolbox.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.