qmk_firmware/keyboards/nullbitsco/nibble/keymaps/via/via_extras.c

130 lines
3.5 KiB
C

/* Copyright 2020 Jay Greco
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "via_extras.h"
// Encoder Behavior
extern uint8_t encoder_value;
extern uint8_t encoder_mode;
extern uint8_t enabled_encoder_modes;
void raw_hid_receive_kb( uint8_t *data, uint8_t length )
{
uint8_t *command_id = &(data[0]);
uint8_t *command_data = &(data[1]);
dprintf("raw hid recv! command_id: %u\n",*command_id);
switch ( *command_id )
{
case id_get_keyboard_value:
{
switch( command_data[0])
{
case id_encoder_modes:
{
command_data[1] = enabled_encoder_modes;
dprintf("[read] enabled_encoder_modes: %u\n", enabled_encoder_modes);
}
break;
case id_encoder_custom:
{
uint8_t custom_encoder_idx = command_data[1];
uint16_t keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CW);
command_data[2] = keycode >> 8;
command_data[3] = keycode & 0xFF;
keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_CCW);
command_data[4] = keycode >> 8;
command_data[5] = keycode & 0xFF;
keycode = retrieve_custom_encoder_config(custom_encoder_idx, ENC_CUSTOM_PRESS);
command_data[6] = keycode >> 8;
command_data[7] = keycode & 0xFF;
}
break;
default:
{
*command_id = id_unhandled;
}
break;
}
}
break;
case id_set_keyboard_value:
{
switch(command_data[0]){
case id_encoder_modes:
{
enabled_encoder_modes = command_data[1];
dprintf("[write] enabled_encoder_modes: %u\n", enabled_encoder_modes);
eeprom_update_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES, enabled_encoder_modes);
}
break;
case id_encoder_custom:
{
uint8_t custom_encoder_idx = command_data[1];
uint8_t encoder_behavior = command_data[2];
uint16_t keycode = (command_data[3] << 8) | command_data[4];
set_custom_encoder_config(custom_encoder_idx, encoder_behavior, keycode);
}
break;
default:
{
*command_id = id_unhandled;
}
break;
}
}
break;
default:
{
// Unhandled message.
*command_id = id_unhandled;
}
break;
}
}
void encoder_update_kb(uint8_t index, bool clockwise) {
if (layer_state_is(1)) {
change_encoder_mode(clockwise);
return;
}
uint16_t mapped_code = 0;
if (clockwise) {
mapped_code = handle_encoder_cw();
} else {
mapped_code = handle_encoder_ccw();
}
if(mapped_code != 0){
tap_code16(mapped_code);
}
}
void custom_config_load(void){
#ifdef DYNAMIC_KEYMAP_ENABLE
enabled_encoder_modes = eeprom_read_byte((uint8_t*)EEPROM_ENABLED_ENCODER_MODES);
#endif
}
void via_init_kb(void)
{
dprintf("VIA is enabled.\n");
custom_config_load();
}