qmk_firmware/keyboards/ergodox_infinity
Otto Rask 122525ee61 Add rask's UK78 and iErgoDox layouts (#1830)
* Add rask's Satan layout

* Add rask's Satan layout

* Add rask's BananaSplit60 layout

* Add rask's BS60 readme

* Fix rask's BS60 readme image

* Fix rask's BS60 readme image again

* Add rask's UK78 layout

* Change RGui to be LGui to fix locale switching

On Ubuntu the keyboard seemingly lost RGui when toggling
between typing languages. With LGui toggling works normally.

* Add rask's ErgoDox Infinity layout

* Modify ErgoDox layout and add readme for it

* Add rask's UK78 layout readme
2017-10-13 05:35:17 -10:00
..
keymaps Add rask's UK78 and iErgoDox layouts (#1830) 2017-10-13 05:35:17 -10:00
MEMO.txt
board_is31fl3731c.h
board_st7565.h
bootloader_defs.h
chconf.h
config.h
ergodox_infinity.c Don't process keycodes on the slave 2017-09-30 06:22:02 -10:00
ergodox_infinity.h
gfxconf.h
halconf.h
led.c
matrix.c
mcuconf.h
readme.md Updated README in ergodox_infinity keyboard (#1702) 2017-09-15 22:01:51 -04:00
rules.mk
simple_visualizer.h
visualizer.c

readme.md

ErgoDox Infinity

The Infinity is two completely independent keyboards, and needs to be flashed for the left and right halves seperately. To flash them:

  • Make sure you are in the top-level qmk_firmware directory

  • Build the firmware with make ergodox_infinity-keymapname

  • Plug in the left hand keyboard only.

  • Press the program button (back of keyboard, above thumb pad).

  • Install the firmware with sudo make ergodox_infinity-keymapname-dfu-util

  • Build right hand firmware with make ergodox_infinity-keymapname MASTER=right

  • Plug in the right hand keyboard only.

  • Press the program button (back of keyboard, above thumb pad).

  • Install the firmware with sudo make ergodox_infinity-keymapname-dfu-util MASTER=right

More information on the Infinity firmware is available in the TMK/chibios for Input Club Infinity Ergodox

Infinity Master/Two Halves

The Infinity is two completely independent keyboards, that can connect together. You have a few options in how you flash the firmware:

  • Flash the left half, rebuild the firmware with "MASTER=right" and then flash the right half. This allows you to plug in either half directly to the computer and is what the above instructions do.

  • Flash the left half, then flash the same firmware on the right. This only works when the left half is plugged directly to the computer and the keymap is mirrored. It saves the small extra step of rebuilding with "MASTER=right".

  • The same as the previous one but with "MASTER=right" when you build the firmware, then flash the same firmware to both halves. You just have to directly connect the right half to the computer.

  • For minor changes such as changing only the keymap without having updated any part of the firmware code itself, you can program only the MASTER half.

  • It is safest to program both halves though.