|
…
|
||
|---|---|---|
| .. | ||
| keymaps | ||
| config.h | ||
| info.json | ||
| just60.h | ||
| readme.md | ||
| rules.mk | ||
readme.md
Just60
Just60 keyboard produced by Yang. The keyboard comes with a custom Mass Storage Device bootloader and a TMK based firmware from ydkb.io.
To use a QMK based firmware, you might want to install a QMK bootloader. The PCB exposes 6 pins for ISP(In-System Programming), and they are located just under the ATMega32U4 chip. From left to right, the pins are VCC, SCLK, MOSI, MISO, QK_BOOT, GND. The GND is the square one. You could program the flash with any AVR programmer, or a Raspberry Pi with avrdude.
Backlight LEDs and Bluetooth are not working yet.
- Keyboard Maintainer: Jianfei Wang
- Hardware Supported: Just60 (atmega32u4)
- Hardware Availability: https://item.taobao.com/item.htm?id=564176654249
Make example for this keyboard (after setting up your build environment):
make ydkb/just60:default
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.