[Keyboard] ID75 v2 (#16351)
peepeetee
GitHub
parent
7fb22706fd
commit
59f671744b
|
|
@ -0,0 +1,152 @@
|
|||
/* Copyright 2022 peepeetee
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0x6964 // ID
|
||||
#define PRODUCT_ID 0x0075
|
||||
#define DEVICE_VER 0x0002
|
||||
#define MANUFACTURER IDOBAO
|
||||
#define PRODUCT ID75
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 15
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { B0, B3, C7, B6, C6 }
|
||||
#define MATRIX_COL_PINS { F6, F5, F4, F1, E6, D5, D3, D2, D1, D0, D4, D6, D7, B4, B5 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#undef RGB_DI_PIN
|
||||
#define RGB_DI_PIN F0
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
# define DRIVER_LED_TOTAL 85 /* 10 Bottom 75 top*/
|
||||
// RGB Matrix Animation modes. Explicitly enabled
|
||||
// For full list of effects, see:
|
||||
// https://docs.qmk.fm/#/feature_rgb_matrix?id=rgb-matrix-effects
|
||||
# define RGB_MATRIX_FRAMEBUFFER_EFFECTS
|
||||
# define RGB_MATRIX_KEYPRESSES
|
||||
# define ENABLE_RGB_MATRIX_ALPHAS_MODS
|
||||
# define ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
|
||||
# define ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
|
||||
# define ENABLE_RGB_MATRIX_BREATHING
|
||||
# define ENABLE_RGB_MATRIX_BAND_SAT
|
||||
# define ENABLE_RGB_MATRIX_BAND_VAL
|
||||
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
|
||||
# define ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
|
||||
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
|
||||
# define ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_ALL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
|
||||
# define ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
|
||||
# define ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
|
||||
// enabled only if RGB_MATRIX_FRAMEBUFFER_EFFECTS is defined
|
||||
# define ENABLE_RGB_MATRIX_TYPING_HEATMAP
|
||||
# define ENABLE_RGB_MATRIX_DIGITAL_RAIN
|
||||
// enabled only if RGB_MATRIX_KEYPRESSES or RGB_MATRIX_KEYRELEASES is defined
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
|
||||
# define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
|
||||
# define ENABLE_RGB_MATRIX_SPLASH
|
||||
# define ENABLE_RGB_MATRIX_MULTISPLASH
|
||||
# define ENABLE_RGB_MATRIX_SOLID_SPLASH
|
||||
# define ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
|
||||
#endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
#define BOOTMAGIC_LITE_ROW 0
|
||||
#define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
|
@ -0,0 +1,10 @@
|
|||
{
|
||||
"keyboard_name": "idobao/id75/v2",
|
||||
"url": "",
|
||||
"maintainer": "qmk",
|
||||
"layouts": {
|
||||
"LAYOUT_ortho_5x15": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":6, "y":0}, {"x":7, "y":0}, {"x":8, "y":0}, {"x":9, "y":0}, {"x":10, "y":0}, {"x":11, "y":0}, {"x":12, "y":0}, {"x":13, "y":0}, {"x":14, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":6, "y":1}, {"x":7, "y":1}, {"x":8, "y":1}, {"x":9, "y":1}, {"x":10, "y":1}, {"x":11, "y":1}, {"x":12, "y":1}, {"x":13, "y":1}, {"x":14, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":6, "y":2}, {"x":7, "y":2}, {"x":8, "y":2}, {"x":9, "y":2}, {"x":10, "y":2}, {"x":11, "y":2}, {"x":12, "y":2}, {"x":13, "y":2}, {"x":14, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7, "y":3}, {"x":8, "y":3}, {"x":9, "y":3}, {"x":10, "y":3}, {"x":11, "y":3}, {"x":12, "y":3}, {"x":13, "y":3}, {"x":14, "y":3}, {"x":0, "y":4}, {"x":1, "y":4}, {"x":2, "y":4}, {"x":3, "y":4}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7, "y":4}, {"x":8, "y":4}, {"x":9, "y":4}, {"x":10, "y":4}, {"x":11, "y":4}, {"x":12, "y":4}, {"x":13, "y":4}, {"x":14, "y":4}]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,27 @@
|
|||
# ID75 v2
|
||||
|
||||
|
||||
|
||||
A 5x15 ortholinear keyboard with hotswap sockets and north facing in switch RGB LEDs and RGB underglow
|
||||
|
||||
* Keyboard Maintainer: [peepeetee](https://github.com/peepeetee)
|
||||
* Hardware Supported: ID75 v2
|
||||
* Hardware Availability: https://idobao.net/products/idobao-id75-crystal-hot-swap-keyboard-kit?_pos=1&_sid=8758d3561&_ss=r
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make idobao/id75/v2:default
|
||||
|
||||
Flashing example for this keyboard:
|
||||
|
||||
make idobao/id75/v2:default:flash
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
||||
## Bootloader
|
||||
|
||||
Enter the bootloader in 3 ways:
|
||||
|
||||
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
|
||||
* **Physical reset button**: Briefly press the button on the back of the PCB
|
||||
* **Keycode in layout**: Press the key mapped to `RESET` if it is available
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Enable Bootmagic Lite
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Enable N-Key Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
|
||||
AUDIO_ENABLE = no # Audio output
|
||||
LTO_ENABLE = yes # Use link time optimization
|
||||
|
||||
RGB_MATRIX_ENABLE = yes
|
||||
RGB_MATRIX_DRIVER = WS2812
|
||||
|
||||
LAYOUTS = ortho_5x15
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
/* Copyright 2022 peepeetee
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "v2.h"
|
||||
|
||||
#ifdef RGB_MATRIX_ENABLE
|
||||
led_config_t g_led_config = { {
|
||||
// Key Matrix to LED Index
|
||||
{ 84, 83, 82, 81, 80, 79, 78, 77, 76, 75, 74, 73, 72, 71, 70 },
|
||||
{ 69, 68, 67, 66, 65, 64, 63, 62, 61, 60, 59, 58, 57, 56, 55 },
|
||||
{ 54, 53, 52, 51, 50, 49, 48, 47, 46, 45, 44, 43, 42, 41, 40 },
|
||||
{ 39, 38, 37, 36, 35, 34, 33, 32, 31, 30, 29, 28, 27, 26, 25 },
|
||||
{ 24, 23, 22, 21, 20, 19, 18, 17, 16, 15, 14, 13, 12, 11, 10 }
|
||||
}, {
|
||||
// LED Index to Physical Position
|
||||
{8, 12},{60, 12},{112, 12},{164, 12},{216, 12},
|
||||
{216, 60},{164, 60},{112, 60},{60, 60},{8, 60},
|
||||
|
||||
|
||||
{224, 64}, {208, 64}, {192, 64}, {176, 64}, {160, 64}, {144, 64}, {128, 64}, {112, 64}, {96, 64}, {80, 64}, {64, 64}, {48, 64}, {32, 64}, {16, 64}, {0, 64},
|
||||
{224, 48}, {208, 48}, {192, 48}, {176, 48}, {160, 48}, {144, 48}, {128, 48}, {112, 48}, {96, 48}, {80, 48}, {64, 48}, {48, 48}, {32, 48}, {16, 48}, {0, 48},
|
||||
{224, 32}, {208, 32}, {192, 32}, {176, 32}, {160, 32}, {144, 32}, {128, 32}, {112, 32}, {96, 32}, {80, 32}, {64, 32}, {48, 32}, {32, 32}, {16, 32}, {0, 32},
|
||||
{224, 16}, {208, 16}, {192, 16}, {176, 16}, {160, 16}, {144, 16}, {128, 16}, {112, 16}, {96, 16}, {80, 16}, {64, 16}, {48, 16}, {32, 16}, {16, 16}, {0, 16},
|
||||
{224, 0}, {208, 0}, {192, 0}, {176, 0}, {160, 0}, {144, 0}, {128, 0}, {112, 0}, {96, 0}, {80, 0}, {64, 0}, {48, 0}, {32, 0}, {16, 0}, {0, 0},
|
||||
|
||||
}, {
|
||||
// LED Index to Flag
|
||||
2,2,2,2,2,2,2,2,2,2,
|
||||
4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
|
||||
4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
|
||||
4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
|
||||
4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
|
||||
4,4,4,4,4,4,4,4,4,4,4,4,4,4,4,
|
||||
|
||||
} };
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/* Copyright 2018 MechMerlin
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
/* This a shortcut to help you visually see your layout.
|
||||
*
|
||||
* The first section contains all of the arguments representing the physical
|
||||
* layout of the board and position of the keys.
|
||||
*
|
||||
* The second converts the arguments into a two-dimensional array which
|
||||
* represents the switch matrix.
|
||||
*/
|
||||
#define LAYOUT_ortho_5x15( \
|
||||
k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E, \
|
||||
k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E, \
|
||||
k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E, \
|
||||
k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E, \
|
||||
k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E \
|
||||
) { \
|
||||
{ k00, k01, k02, k03, k04, k05, k06, k07, k08, k09, k0A, k0B, k0C, k0D, k0E }, \
|
||||
{ k10, k11, k12, k13, k14, k15, k16, k17, k18, k19, k1A, k1B, k1C, k1D, k1E }, \
|
||||
{ k20, k21, k22, k23, k24, k25, k26, k27, k28, k29, k2A, k2B, k2C, k2D, k2E }, \
|
||||
{ k30, k31, k32, k33, k34, k35, k36, k37, k38, k39, k3A, k3B, k3C, k3D, k3E }, \
|
||||
{ k40, k41, k42, k43, k44, k45, k46, k47, k48, k49, k4A, k4B, k4C, k4D, k4E } \
|
||||
}
|
||||
Loading…
Reference in New Issue