Change Makefile and port setting
- Makefile use LUFA now
- Change MCU ports PF{0,1} to PD{0,1}
- Add build option for keymap to Makefile: make keymap=hasu
master
tmk
parent
c274cc8cdc
commit
60103a12b2
|
|
@ -1,5 +1,5 @@
|
|||
# Target file name (without extension).
|
||||
TARGET = m0110
|
||||
TARGET = m0110_lufa
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
|
@ -8,11 +8,17 @@ TOP_DIR = ../..
|
|||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = keymap.c \
|
||||
matrix.c \
|
||||
SRC = matrix.c \
|
||||
led.c \
|
||||
m0110.c
|
||||
|
||||
# To use own keymap file run make like: make keymap=hasu
|
||||
ifdef keymap
|
||||
SRC += keymap_$(keymap).c
|
||||
else
|
||||
SRC += keymap.c
|
||||
endif
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
|
|
@ -32,6 +38,29 @@ MCU = atmega32u4 # Teensy 2.0
|
|||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
|
|
@ -61,7 +90,7 @@ VPATH += $(TARGET_DIR)
|
|||
VPATH += $(TOP_DIR)
|
||||
|
||||
|
||||
include $(TOP_DIR)/protocol/pjrc.mk
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/protocol.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
|
|
|||
|
|
@ -1,90 +0,0 @@
|
|||
# Target file name (without extension).
|
||||
TARGET = m0110_lufa
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = keymap.c \
|
||||
matrix.c \
|
||||
led.c \
|
||||
m0110.c
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
# MCU name, you MUST set this to match the board you are using
|
||||
# type "make clean" after changing this, so all files will be rebuilt
|
||||
#MCU = at90usb162 # Teensy 1.0
|
||||
MCU = atmega32u4 # Teensy 2.0
|
||||
#MCU = at90usb646 # Teensy++ 1.0
|
||||
#MCU = at90usb1286 # Teensy++ 2.0
|
||||
|
||||
|
||||
# Processor frequency.
|
||||
# Normally the first thing your program should do is set the clock prescaler,
|
||||
# so your program will run at the correct speed. You should also set this
|
||||
# variable to same clock speed. The _delay_ms() macro uses this, and many
|
||||
# examples use this variable to calculate timings. Do not add a "UL" here.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
|
||||
|
||||
#---------------- Programming Options --------------------------
|
||||
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
|
||||
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
|
||||
|
||||
include $(TOP_DIR)/protocol/lufa.mk
|
||||
include $(TOP_DIR)/protocol.mk
|
||||
include $(TOP_DIR)/common.mk
|
||||
include $(TOP_DIR)/rules.mk
|
||||
|
|
@ -1,5 +1,5 @@
|
|||
# Target file name (without extension).
|
||||
TARGET = m0110
|
||||
TARGET = m0110_pjrc
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
|
|
@ -8,11 +8,17 @@ TOP_DIR = ../..
|
|||
TARGET_DIR = .
|
||||
|
||||
# keyboard dependent files
|
||||
SRC = keymap_hasu.c \
|
||||
matrix.c \
|
||||
SRC = matrix.c \
|
||||
led.c \
|
||||
m0110.c
|
||||
|
||||
# To use own keymap file run make like: make keymap=hasu
|
||||
ifdef keymap
|
||||
SRC += keymap_$(keymap).c
|
||||
else
|
||||
SRC += keymap.c
|
||||
endif
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
|
||||
|
|
@ -32,13 +38,23 @@ MCU = atmega32u4 # Teensy 2.0
|
|||
F_CPU = 16000000
|
||||
|
||||
|
||||
# Boot Section Size in bytes
|
||||
# Teensy halfKay 512
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# *Comment out* to disable the options.
|
||||
#
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys
|
||||
#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend
|
||||
#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA
|
||||
|
||||
|
||||
|
||||
|
|
@ -11,10 +11,16 @@ you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
|
|||
|
||||
|
||||
|
||||
Update
|
||||
------
|
||||
- 2013/08 Change port for signals PF to PD
|
||||
|
||||
|
||||
|
||||
Connection
|
||||
----------
|
||||
You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
|
||||
Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default,
|
||||
Teensy port `PD0` is assigned for `CLOCK` line and `PD1` for `DATA` by default,
|
||||
you can change pin configuration with editing *config.h*.
|
||||
|
||||
You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
|
||||
|
|
@ -53,8 +59,8 @@ You can edit *Makefile* and *config.h* to change compile options and pin configu
|
|||
|
||||
$ git clone git://github.com/tmk/tmk_keyboard.git (or download source)
|
||||
$ cd m0110_usb
|
||||
$ make -f Makefile.lufa clean
|
||||
$ make -f Makefile.lufa
|
||||
$ make -f Makefile clean
|
||||
$ make -f Makefile
|
||||
|
||||
and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
|
||||
|
||||
|
|
|
|||
|
|
@ -21,7 +21,7 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x0110
|
||||
#define DEVICE_VER 0x0100
|
||||
#define DEVICE_VER 0x0101
|
||||
#define MANUFACTURER t.m.k.
|
||||
#define PRODUCT M0110 keyboard converter
|
||||
#define DESCRIPTION convert M0110 keyboard to USB
|
||||
|
|
@ -50,13 +50,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
|
||||
|
||||
/* ports */
|
||||
#define M0110_CLOCK_PORT PORTF
|
||||
#define M0110_CLOCK_PIN PINF
|
||||
#define M0110_CLOCK_DDR DDRF
|
||||
#define M0110_CLOCK_PORT PORTD
|
||||
#define M0110_CLOCK_PIN PIND
|
||||
#define M0110_CLOCK_DDR DDRD
|
||||
#define M0110_CLOCK_BIT 0
|
||||
#define M0110_DATA_PORT PORTF
|
||||
#define M0110_DATA_PIN PINF
|
||||
#define M0110_DATA_DDR DDRF
|
||||
#define M0110_DATA_PORT PORTD
|
||||
#define M0110_DATA_PIN PIND
|
||||
#define M0110_DATA_DDR DDRD
|
||||
#define M0110_DATA_BIT 1
|
||||
|
||||
#endif
|
||||
|
|
|
|||
|
|
@ -19,7 +19,6 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/pgmspace.h>
|
||||
#include "usb_keyboard.h"
|
||||
#include "keycode.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
|
|
@ -153,7 +152,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
* `-----------------------------------------------' `---------------'
|
||||
*/
|
||||
KEYMAP(
|
||||
GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST,
|
||||
ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST,
|
||||
TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS,
|
||||
LCTL,A, S, D, F, G, H, J, K, L, FN1, QUOT, FN0, P4, P5, P6, PPLS,
|
||||
LSFT,Z, X, C, V, B, N, M, COMM,DOT, FN2, FN3, P1, P2, P3, PENT,
|
||||
|
|
@ -161,7 +160,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
),
|
||||
// HHKB & WASD
|
||||
KEYMAP(
|
||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
|
||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
|
||||
CAPS,NO, NO, NO, NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, P7, P8, P9, PMNS,
|
||||
LCTL,VOLD,VOLU,MUTE,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN0, P4, P5, P6, PPLS,
|
||||
LSFT,NO, NO, NO, NO, NO, NO, NO, END, PGDN,DOWN, FN3, P1, P2, P3, PENT,
|
||||
|
|
@ -169,7 +168,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
),
|
||||
// vi mousekeys
|
||||
KEYMAP(
|
||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
|
||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
|
||||
CAPS,NO, NO, NO, NO, NO, WH_L,WH_D,WH_U,WH_R,PSCR,SLCK,PAUS, P7, P8, P9, PMNS,
|
||||
LCTL,VOLD,VOLU,MUTE,NO, NO, MS_L,MS_D,MS_U,MS_R,FN1, NO, ENT, P4, P5, P6, PPLS,
|
||||
LSFT,NO, NO, NO, NO, BTN3,BTN2,BTN1,NO, NO, NO, NO, P1, P2, P3, PENT,
|
||||
|
|
@ -177,7 +176,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
),
|
||||
// vi cusorkeys
|
||||
KEYMAP(
|
||||
ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
|
||||
GRV, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST,
|
||||
CAPS,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, PSCR,SLCK,PAUS, P7, P8, P9, PMNS,
|
||||
LCTL,NO, NO, NO, NO, NO, LEFT,DOWN,UP, RGHT,NO, NO, ENT, P4, P5, P6, PPLS,
|
||||
LSFT,NO, NO, NO, NO, NO, HOME,PGDN,PGUP,END, FN2, NO, P1, P2, P3, PENT,
|
||||
|
|
|
|||
Loading…
Reference in New Issue