[Keyboard] Add meson keyboard (#6482)
* Add meson keyboard * Apply suggestions from code review Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com> * Added soft reset and layer 3 * bootmagic light Co-Authored-By: noroadsleft <18669334+noroadsleft@users.noreply.github.com>master
Luciano Malavasi
Drashna Jaelre
parent
9114d6ebe9
commit
b93e1309e5
|
|
@ -0,0 +1,172 @@
|
|||
/*
|
||||
Copyright 2019 Luciano M
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x0000
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Luciano M
|
||||
#define PRODUCT Meson
|
||||
#define DESCRIPTION 3x14 split keyboard with two thumb keys per side
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 8 // 4 rows each half
|
||||
#define MATRIX_COLS 7
|
||||
|
||||
#define MATRIX_ROW_PINS { F7, C6, F6, F5 }
|
||||
#define MATRIX_COL_PINS { D4, D7, E6, B3, B2, B6, F4 }
|
||||
// #define UNUSED_PINS
|
||||
|
||||
/* COL2ROW, ROW2COL*/
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
#define USE_I2C
|
||||
#define SOFT_SERIAL_PIN D0
|
||||
|
||||
#define RGB_DI_PIN B5
|
||||
#ifdef RGB_DI_PIN
|
||||
#define RGBLED_NUM 10
|
||||
#define RGBLIGHT_SPLIT
|
||||
#define RGBLED_SPLIT { 5, 5 }
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
/*== all animations enable ==*/
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
/*== customize breathing effect ==*/
|
||||
/*==== (DEFAULT) use fixed table instead of exp() and sin() ====*/
|
||||
#define RGBLIGHT_BREATHE_TABLE_SIZE 256 // 256(default) or 128 or 64
|
||||
/*==== use exp() and sin() ====*/
|
||||
#define RGBLIGHT_EFFECT_BREATHE_CENTER 1.85 // 1 to 2.7
|
||||
#define RGBLIGHT_EFFECT_BREATHE_MAX 255 // 0 to 255
|
||||
#endif
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* If defined, GRAVE_ESC will always act as ESC when CTRL is held.
|
||||
* This is userful for the Windows task manager shortcut (ctrl+shift+esc).
|
||||
*/
|
||||
// #define GRAVE_ESC_CTRL_OVERRIDE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
/* defined by default; to change, uncomment and set to the combination you want */
|
||||
// #define IS_COMMAND() (get_mods() == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP H
|
||||
//#define MAGIC_KEY_HELP_ALT SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER0_ALT GRAVE
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER B
|
||||
//#define MAGIC_KEY_BOOTLOADER_ALT ESC
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_EEPROM_CLEAR BSPACE
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
|
||||
/* Bootmagic Lite key configuration */
|
||||
// #define BOOTMAGIC_LITE_ROW 0
|
||||
// #define BOOTMAGIC_LITE_COLUMN 0
|
||||
|
|
@ -0,0 +1,108 @@
|
|||
{
|
||||
"keyboard_name": "Meson",
|
||||
"keyboard_folder": "meson",
|
||||
"maintainer": "qmk",
|
||||
"width": 15.5,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [
|
||||
{"label": "", "x": 0, "y": 0},
|
||||
{"label": "", "x": 1, "y": 0},
|
||||
{"label": "", "x": 2, "y": 0},
|
||||
{"label": "", "x": 3, "y": 0},
|
||||
{"label": "", "x": 4, "y": 0},
|
||||
{"label": "", "x": 5, "y": 0},
|
||||
{"label": "", "x": 6, "y": 0},
|
||||
{"label": "", "x": 8.5, "y": 0},
|
||||
{"label": "", "x": 9.5, "y": 0},
|
||||
{"label": "", "x": 10.5, "y": 0},
|
||||
{"label": "", "x": 11.5, "y": 0},
|
||||
{"label": "", "x": 12.5, "y": 0},
|
||||
{"label": "", "x": 13.5, "y": 0},
|
||||
{"label": "", "x": 14.5, "y": 0},
|
||||
{"label": "", "x": 0, "y": 1},
|
||||
{"label": "", "x": 1, "y": 1},
|
||||
{"label": "", "x": 2, "y": 1},
|
||||
{"label": "", "x": 3, "y": 1},
|
||||
{"label": "", "x": 4, "y": 1},
|
||||
{"label": "", "x": 5, "y": 1},
|
||||
{"label": "", "x": 6, "y": 1},
|
||||
{"label": "", "x": 8.5, "y": 1},
|
||||
{"label": "", "x": 9.5, "y": 1},
|
||||
{"label": "", "x": 10.5, "y": 1},
|
||||
{"label": "", "x": 11.5, "y": 1},
|
||||
{"label": "", "x": 12.5, "y": 1},
|
||||
{"label": "", "x": 13.5, "y": 1},
|
||||
{"label": "", "x": 14.5, "y": 1},
|
||||
{"label": "", "x": 0, "y": 2},
|
||||
{"label": "", "x": 1, "y": 2},
|
||||
{"label": "", "x": 2, "y": 2},
|
||||
{"label": "", "x": 3, "y": 2},
|
||||
{"label": "", "x": 4, "y": 2},
|
||||
{"label": "", "x": 5, "y": 2},
|
||||
{"label": "", "x": 6, "y": 2},
|
||||
{"label": "", "x": 8.5, "y": 2},
|
||||
{"label": "", "x": 9.5, "y": 2},
|
||||
{"label": "", "x": 10.5, "y": 2},
|
||||
{"label": "", "x": 11.5, "y": 2},
|
||||
{"label": "", "x": 12.5, "y": 2},
|
||||
{"label": "", "x": 13.5, "y": 2},
|
||||
{"label": "", "x": 14.5, "y": 2},
|
||||
{"label": "", "x": 4, "y": 3},
|
||||
{"label": "", "x": 5, "y": 3},
|
||||
{"label": "", "x": 9.5, "y": 3},
|
||||
{"label": "", "x": 10.5, "y": 3}
|
||||
]
|
||||
},
|
||||
"LAYOUT_2u": {
|
||||
"layout": [
|
||||
{"label": "", "x": 0, "y": 0},
|
||||
{"label": "", "x": 1, "y": 0},
|
||||
{"label": "", "x": 2, "y": 0},
|
||||
{"label": "", "x": 3, "y": 0},
|
||||
{"label": "", "x": 4, "y": 0},
|
||||
{"label": "", "x": 5, "y": 0},
|
||||
{"label": "", "x": 6, "y": 0},
|
||||
{"label": "", "x": 8.5, "y": 0},
|
||||
{"label": "", "x": 9.5, "y": 0},
|
||||
{"label": "", "x": 10.5, "y": 0},
|
||||
{"label": "", "x": 11.5, "y": 0},
|
||||
{"label": "", "x": 12.5, "y": 0},
|
||||
{"label": "", "x": 13.5, "y": 0},
|
||||
{"label": "", "x": 14.5, "y": 0},
|
||||
{"label": "", "x": 0, "y": 1},
|
||||
{"label": "", "x": 1, "y": 1},
|
||||
{"label": "", "x": 2, "y": 1},
|
||||
{"label": "", "x": 3, "y": 1},
|
||||
{"label": "", "x": 4, "y": 1},
|
||||
{"label": "", "x": 5, "y": 1},
|
||||
{"label": "", "x": 6, "y": 1},
|
||||
{"label": "", "x": 8.5, "y": 1},
|
||||
{"label": "", "x": 9.5, "y": 1},
|
||||
{"label": "", "x": 10.5, "y": 1},
|
||||
{"label": "", "x": 11.5, "y": 1},
|
||||
{"label": "", "x": 12.5, "y": 1},
|
||||
{"label": "", "x": 13.5, "y": 1},
|
||||
{"label": "", "x": 14.5, "y": 1},
|
||||
{"label": "", "x": 0, "y": 2},
|
||||
{"label": "", "x": 1, "y": 2},
|
||||
{"label": "", "x": 2, "y": 2},
|
||||
{"label": "", "x": 3, "y": 2},
|
||||
{"label": "", "x": 4, "y": 2},
|
||||
{"label": "", "x": 5, "y": 2},
|
||||
{"label": "", "x": 6, "y": 2},
|
||||
{"label": "", "x": 8.5, "y": 2},
|
||||
{"label": "", "x": 9.5, "y": 2},
|
||||
{"label": "", "x": 10.5, "y": 2},
|
||||
{"label": "", "x": 11.5, "y": 2},
|
||||
{"label": "", "x": 12.5, "y": 2},
|
||||
{"label": "", "x": 13.5, "y": 2},
|
||||
{"label": "", "x": 14.5, "y": 2},
|
||||
{"label": "", "x": 4, "y": 3, "w": 2},
|
||||
{"label": "", "x": 9.5, "y": 3, "w": 2}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,19 @@
|
|||
/* Copyright 2019 Luciano M
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
// place overrides here
|
||||
|
|
@ -0,0 +1,78 @@
|
|||
/* Copyright 2019 Luciano M
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
// Defines the keycodes used by our macros in process_record_user
|
||||
enum custom_keycodes {
|
||||
MESON = SAFE_RANGE,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[0] = LAYOUT( /* Base */
|
||||
KC_ESC, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TAB, KC_BSLS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC,
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_LALT, KC_GRV, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_ENT,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_LGUI, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_QUOT,
|
||||
MO(1), KC_SPC, KC_SPC, MO(2)
|
||||
),
|
||||
|
||||
[1] = LAYOUT( /* Symbols */
|
||||
KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_TAB, KC_BSLS, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, RGB_VAI,
|
||||
KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, RGB_VAD,
|
||||
KC_LSFT, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE, KC_LGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_TRNS, MESON, RGB_MOD,
|
||||
MO(1), KC_SPC, KC_SPC, MO(3)
|
||||
),
|
||||
|
||||
[2] = LAYOUT( /* Numbers */
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_TAB, KC_BSLS, KC_6, KC_7, KC_8, KC_9, KC_0, KC_VOLU,
|
||||
KC_LCTL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_VOLD,
|
||||
KC_LSFT, KC_MINS, KC_EQL, KC_LBRC, KC_RBRC, KC_BSLS, KC_LGUI, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, KC_MPRV, KC_MNXT, KC_MPLY,
|
||||
MO(3), KC_SPC, KC_SPC, MO(2)
|
||||
),
|
||||
|
||||
[3] = LAYOUT( /* Reset, other functions if you want */
|
||||
RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
};
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case MESON:
|
||||
if (record->event.pressed) {
|
||||
// when keycode MESON is pressed
|
||||
SEND_STRING("Meson macro working");
|
||||
} else {
|
||||
// when keycode MESON is released
|
||||
}
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
}
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The default keymap for meson
|
||||
|
|
@ -0,0 +1,51 @@
|
|||
/* Copyright 2019 Luciano M
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "meson.h"
|
||||
|
||||
// Optional override functions below.
|
||||
// You can leave any or all of these undefined.
|
||||
// These are only required if you want to perform custom actions.
|
||||
|
||||
/*
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
*/
|
||||
|
|
@ -0,0 +1,56 @@
|
|||
/* Copyright 2019 Luciano M
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
#include "quantum.h"
|
||||
|
||||
#define ___ KC_NO
|
||||
|
||||
#define LAYOUT( \
|
||||
L00, L01, L02, L03, L04, L05, L06, R06, R05, R04, R03, R02, R01, R00, \
|
||||
L10, L11, L12, L13, L14, L15, L16, R16, R15, R14, R13, R12, R11, R10, \
|
||||
L20, L21, L22, L23, L24, L25, L26, R26, R25, R24, R23, R22, R21, R20, \
|
||||
L30, L31, R31, R30 \
|
||||
) \
|
||||
{ \
|
||||
{ L00, L01, L02, L03, L04, L05, L06}, \
|
||||
{ L10, L11, L12, L13, L14, L15, L16}, \
|
||||
{ L20, L21, L22, L23, L24, L25, L26}, \
|
||||
{ ___, ___, ___, ___, L30, L31, ___}, \
|
||||
{ R00, R01, R02, R03, R04, R05, R06}, \
|
||||
{ R10, R11, R12, R13, R14, R15, R16}, \
|
||||
{ R20, R21, R22, R23, R24, R25, R26}, \
|
||||
{ ___, ___, ___, ___, R30, R31, ___}, \
|
||||
}
|
||||
|
||||
// 2u SPACEBAR LAYOUT, DON'T FORGET TO CHANGE NAME OF LAYOUTS IN KEYMAP.C
|
||||
|
||||
#define LAYOUT_2u( \
|
||||
L00, L01, L02, L03, L04, L05, L06, R06, R05, R04, R03, R02, R01, R00, \
|
||||
L10, L11, L12, L13, L14, L15, L16, R16, R15, R14, R13, R12, R11, R10, \
|
||||
L20, L21, L22, L23, L24, L25, L26, R26, R25, R24, R23, R22, R21, R20, \
|
||||
L30, R30 \
|
||||
) \
|
||||
{ \
|
||||
{ L00, L01, L02, L03, L04, L05, L06}, \
|
||||
{ L10, L11, L12, L13, L14, L15, L16}, \
|
||||
{ L20, L21, L22, L23, L24, L25, L26}, \
|
||||
{ ___, ___, ___, ___, L30, ___, ___},\
|
||||
{ R00, R01, R02, R03, R04, R05, R06}, \
|
||||
{ R10, R11, R12, R13, R14, R15, R16}, \
|
||||
{ R20, R21, R22, R23, R24, R25, R26}, \
|
||||
{ ___, ___, ___, ___, R30, ___, ___},\
|
||||
}
|
||||
|
|
@ -0,0 +1,13 @@
|
|||
# meson
|
||||
|
||||
A 3x14 split keyboard with two thumb keys on each half. Supports MX, Alps, and Choc reversible.
|
||||
|
||||
Keyboard Maintainer: [PyroL](https://github.com/PyrooL)
|
||||
Hardware Supported: Meson PCBs, Pro Micro
|
||||
Hardware Availability: [open source at PyroL's Github](https://github.com/PyrooL/Meson)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make meson:default
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
|
@ -0,0 +1,81 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Bootloader selection
|
||||
# Teensy halfkay
|
||||
# Pro Micro caterina
|
||||
# Atmel DFU atmel-dfu
|
||||
# LUFA DFU lufa-dfu
|
||||
# QMK DFU qmk-dfu
|
||||
# atmega32a bootloadHID
|
||||
BOOTLOADER = caterina
|
||||
|
||||
|
||||
# If you don't know the bootloader type, then you can specify the
|
||||
# Boot Section Size in *bytes* by uncommenting out the OPT_DEFS line
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
# OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
SPLIT_KEYBOARD = yes
|
||||
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
MIDI_ENABLE = no # MIDI support (+2400 to 4200, depending on config)
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
FAUXCLICKY_ENABLE = no # Use buzzer to emulate clicky switches
|
||||
HD44780_ENABLE = no # Enable support for HD44780 based LCDs (+400)
|
||||
Loading…
Reference in New Issue