Added backlight step functionality
jpetermans
parent
ec1e936dfb
commit
c0ec1756af
|
|
@ -170,12 +170,12 @@ static THD_FUNCTION(LEDthread, arg) {
|
|||
(void)arg;
|
||||
chRegSetThreadName("LEDthread");
|
||||
|
||||
uint8_t i, page;
|
||||
uint8_t control_register_word[2] = {0};
|
||||
uint8_t i, j, page;
|
||||
uint8_t control_register_word[2] = {0};//register address - byte to write
|
||||
uint8_t led_control_reg[0x13] = {0};//led control register start address + 0x12 bytes
|
||||
|
||||
//persistent status variables
|
||||
uint8_t backlight_status, led_step_status, layer_status;
|
||||
uint8_t backlight_status, pwm_step_status, layer_status;
|
||||
|
||||
//mailbox variables
|
||||
uint8_t temp, msg_type, msg_led;
|
||||
|
|
@ -187,9 +187,9 @@ static THD_FUNCTION(LEDthread, arg) {
|
|||
*/
|
||||
|
||||
// initialize persistent variables
|
||||
backlight_status = 0;
|
||||
led_step_status = 4; //full brightness
|
||||
layer_status = 0;
|
||||
backlight_status = 0; //start backlight off
|
||||
pwm_step_status = 4; //full brightness
|
||||
layer_status = 0; //start frame 0 (all off/on)
|
||||
|
||||
while(true) {
|
||||
// wait for a message (asynchronous)
|
||||
|
|
@ -202,170 +202,172 @@ layer_status = 0;
|
|||
xprintf("--------------------\n");
|
||||
xprintf("mailbox fetch\nmsg: %X\n", msg);
|
||||
xprintf("type: %X - led: %X\n", msg_type, msg_led); //test if msg_type is 1 or 2 bytes after mask
|
||||
switch (msg_type){
|
||||
case KEY_LIGHT:
|
||||
//TODO: lighting key led on keypress
|
||||
break;
|
||||
|
||||
//turn on/off/toggle single led, msg_led = row/col of led
|
||||
case OFF_LED:
|
||||
xprintf("OFF_LED\n");
|
||||
set_led_bit(7, control_register_word, msg_led, 0);
|
||||
is31_write_data (7, control_register_word, 0x02);
|
||||
if (layer_status > 0) {//check current led page to prevent double blink
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
||||
}
|
||||
layer_status = 7;
|
||||
break;
|
||||
case ON_LED:
|
||||
xprintf("ON_LED\n");
|
||||
set_led_bit(7, control_register_word, msg_led, 1);
|
||||
is31_write_data (7, control_register_word, 0x02);
|
||||
if (layer_status > 7) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
||||
}
|
||||
layer_status = 7;
|
||||
break;
|
||||
case TOGGLE_LED:
|
||||
xprintf("TOGGLE_LED\n");
|
||||
set_led_bit(7, control_register_word, msg_led, 2);
|
||||
|
||||
is31_write_data (7, control_register_word, 0x02);
|
||||
if (layer_status > 7) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
||||
}
|
||||
layer_status = 7;
|
||||
break;
|
||||
|
||||
case TOGGLE_ALL:
|
||||
xprintf("TOGGLE_ALL\n");
|
||||
//msg_led = unused, TODO: consider using msg_led to toggle layer display
|
||||
|
||||
is31_read_register(0, 0x00, &temp);//if first byte is on, then toggle frame 1 off
|
||||
|
||||
led_control_reg[0] = 0;
|
||||
if (temp==0) {
|
||||
xprintf("all leds on");
|
||||
__builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
|
||||
} else {
|
||||
xprintf("all leds off");
|
||||
__builtin_memset(led_control_reg+1, 0, 0x12);
|
||||
}
|
||||
|
||||
is31_write_data(0, led_control_reg, 0x13);
|
||||
if (layer_status > 0) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
|
||||
}
|
||||
layer_status=0;
|
||||
//TODO: Double blink when all on
|
||||
break;
|
||||
|
||||
case TOGGLE_BACKLIGHT:
|
||||
//msg_led = unused
|
||||
//TODO: consider Frame 0 as on/off layer and toggle led control register here
|
||||
//TODO: need to test tracking of active layer with layer_state from qmk
|
||||
xprintf("TOGGLE_BACKLIGHT\n");
|
||||
backlight_status ^= 1;
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
||||
layer_status = temp;
|
||||
|
||||
page = backlight_status == 0 ? 0 : layer_status;
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, page);
|
||||
break;
|
||||
|
||||
case TOGGLE_LAYER_LEDS://show layer indicator or full map of layer keys.
|
||||
//TODO: change so user can flag which they want, indiv or full map in fn_actions
|
||||
//msg_led = layer to toggle on
|
||||
xprintf("TOGGLE_LAYER_LEDS\n");
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
||||
|
||||
if(temp == msg_led) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
||||
layer_status = 7;
|
||||
} else {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led);
|
||||
layer_status = msg_led;
|
||||
}
|
||||
switch (msg_type){
|
||||
case KEY_LIGHT:
|
||||
//TODO: lighting key led on keypress
|
||||
break;
|
||||
|
||||
case TOGGLE_NUM_LOCK:
|
||||
//msg_led = 0 or 1, off/on
|
||||
//TODO: confirm toggling works and doesn't get out of sync
|
||||
set_lock_leds(USB_LED_NUM_LOCK, msg_led);
|
||||
break;
|
||||
|
||||
case TOGGLE_CAPS_LOCK:
|
||||
//msg_led = 0 or 1, off/on
|
||||
//TODO: confirm toggling works and doesn't get out of sync
|
||||
set_lock_leds(USB_LED_CAPS_LOCK, msg_led);
|
||||
break;
|
||||
|
||||
case MODE_BREATH:
|
||||
break;
|
||||
case STEP_BRIGHTNESS:
|
||||
//TEST: Step brightness code
|
||||
//pwm_levels[] bounds checking, loop through array
|
||||
//TODO: find a cleaner way to walk through this logic
|
||||
if (msg_led == 0 && led_step_status == 0) {
|
||||
led_step_status = 4;
|
||||
} else {
|
||||
led_step_status--;
|
||||
}
|
||||
|
||||
if (msg_led == 1 && led_step_status == 4) {
|
||||
led_step_status = 0;
|
||||
} else {
|
||||
led_step_status++;
|
||||
}
|
||||
|
||||
//TODO: this seems a messy way to populate the pwm register
|
||||
//mimic whitefox init which uses memcpy
|
||||
//populate the 9 byte rows to be written to each pin, first byte is register (pin) address
|
||||
for(i=1; i<9; i++) {
|
||||
pwm_register_array[i]=pwm_levels[led_step_status];
|
||||
}
|
||||
for(i=0; i<8; i++) {
|
||||
pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
|
||||
is31_write_data(0, pwm_register_array, 9);//first page controls pwm in all pages (init Display Option register)
|
||||
}
|
||||
break;
|
||||
|
||||
/* case LED_MSG_SLEEP_LED_ON:
|
||||
// save current settings
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
|
||||
// use pages 7 and 8 for (hardware) breathing (assuming they're empty)
|
||||
is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
|
||||
is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
||||
retval = MSG_TIMEOUT;
|
||||
temp = 6;
|
||||
while(retval == MSG_TIMEOUT) {
|
||||
// switch to the other page
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
|
||||
temp = (temp == 6 ? 7 : 6);
|
||||
// the times should be sufficiently long for IS31 to finish switching pages
|
||||
retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
|
||||
//turn on/off/toggle single led, msg_led = row/col of led
|
||||
case OFF_LED:
|
||||
xprintf("OFF_LED\n");
|
||||
set_led_bit(7, control_register_word, msg_led, 0);
|
||||
is31_write_data (7, control_register_word, 0x02);
|
||||
if (layer_status > 0) {//check current led page to prevent double blink
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
||||
}
|
||||
// received a message (should be a wakeup), so restore previous state
|
||||
chThdSleepMilliseconds(3000); // need to wait until the page change finishes
|
||||
// note: any other messages are queued
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
|
||||
layer_status = 7;
|
||||
break;
|
||||
case LED_MSG_SLEEP_LED_OFF:
|
||||
// should not get here; wakeup should be received in the branch above break;
|
||||
case ON_LED:
|
||||
xprintf("ON_LED\n");
|
||||
set_led_bit(7, control_register_word, msg_led, 1);
|
||||
is31_write_data (7, control_register_word, 0x02);
|
||||
if (layer_status > 7) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
||||
}
|
||||
layer_status = 7;
|
||||
break;
|
||||
*/
|
||||
case TOGGLE_LED:
|
||||
xprintf("TOGGLE_LED\n");
|
||||
set_led_bit(7, control_register_word, msg_led, 2);
|
||||
|
||||
is31_write_data (7, control_register_word, 0x02);
|
||||
if (layer_status > 7) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
||||
}
|
||||
layer_status = 7;
|
||||
break;
|
||||
|
||||
case TOGGLE_ALL:
|
||||
xprintf("TOGGLE_ALL\n");
|
||||
//msg_led = unused
|
||||
|
||||
is31_read_register(0, 0x00, &temp);//if first byte is on, then toggle frame 1 off
|
||||
|
||||
led_control_reg[0] = 0;
|
||||
if (temp==0) {
|
||||
xprintf("all leds on");
|
||||
__builtin_memcpy(led_control_reg+1, all_on_leds_mask, 0x12);
|
||||
} else {
|
||||
xprintf("all leds off");
|
||||
__builtin_memset(led_control_reg+1, 0, 0x12);
|
||||
}
|
||||
|
||||
is31_write_data(0, led_control_reg, 0x13);
|
||||
if (layer_status > 0) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 0);
|
||||
}
|
||||
layer_status=0;
|
||||
break;
|
||||
|
||||
case TOGGLE_BACKLIGHT:
|
||||
//msg_led = unused
|
||||
//TODO: need to test tracking of active layer with layer_state from qmk
|
||||
xprintf("TOGGLE_BACKLIGHT\n");
|
||||
backlight_status ^= 1;
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
||||
layer_status = temp;
|
||||
|
||||
page = backlight_status == 0 ? 0 : layer_status;
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, page);
|
||||
break;
|
||||
|
||||
case TOGGLE_PAGE_LEDS://show single layer indicator or full map of layer
|
||||
//msg_led = page to toggle on
|
||||
xprintf("TOGGLE_LAYER_LEDS\n");
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &temp);
|
||||
|
||||
if(temp == msg_led) {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, 7);
|
||||
layer_status = 7;
|
||||
} else {
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, msg_led);
|
||||
layer_status = msg_led;
|
||||
}
|
||||
break;
|
||||
|
||||
case TOGGLE_NUM_LOCK:
|
||||
//msg_led = 0 or 1, off/on
|
||||
set_lock_leds(USB_LED_NUM_LOCK, msg_led);
|
||||
break;
|
||||
|
||||
case TOGGLE_CAPS_LOCK:
|
||||
//msg_led = 0 or 1, off/on
|
||||
set_lock_leds(USB_LED_CAPS_LOCK, msg_led);
|
||||
break;
|
||||
|
||||
case MODE_BREATH:
|
||||
break;
|
||||
case STEP_BRIGHTNESS:
|
||||
xprintf("TOGGLE_BACKLIGHT\n");
|
||||
//led_msg = step pwm up or down
|
||||
//TODO: test step brightness code
|
||||
//pwm_levels[] bounds checking, loop through array
|
||||
switch (msg_led) {
|
||||
case 0:
|
||||
if (pwm_step_status == 0) {
|
||||
pwm_step_status = 4;
|
||||
} else {
|
||||
pwm_step_status--;
|
||||
}
|
||||
break;
|
||||
|
||||
case 1:
|
||||
if (pwm_step_status == 4) {
|
||||
pwm_step_status = 0;
|
||||
} else {
|
||||
pwm_step_status++;
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
//populate the 9 byte rows to be written to each pin, first byte is register (pin) address
|
||||
__builtin_memset(pwm_register_array+1, pwm_levels[pwm_step_status], 8);
|
||||
|
||||
for(i=0; i<8; i++) {
|
||||
//first byte is register address, every 0x10 9 bytes is A-register pwm pins
|
||||
pwm_register_array[0] = 0x24 + (i * 0x10);
|
||||
for(j=0; j<9; j++) {
|
||||
}
|
||||
is31_write_data(0,pwm_register_array,9);
|
||||
}
|
||||
break;
|
||||
|
||||
/* case LED_MSG_SLEEP_LED_ON:
|
||||
// save current settings
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, &save_page);
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, &save_breath1);
|
||||
is31_read_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, &save_breath2);
|
||||
// use pages 7 and 8 for (hardware) breathing (assuming they're empty)
|
||||
is31_write_register(6, BREATHE_LED_ADDRESS, 0xFF);
|
||||
is31_write_register(7, BREATHE_LED_ADDRESS, 0x00);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (6<<4)|6);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, IS31_REG_BREATHCTRL2_ENABLE|3);
|
||||
retval = MSG_TIMEOUT;
|
||||
temp = 6;
|
||||
while(retval == MSG_TIMEOUT) {
|
||||
// switch to the other page
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, temp);
|
||||
temp = (temp == 6 ? 7 : 6);
|
||||
// the times should be sufficiently long for IS31 to finish switching pages
|
||||
retval = chMBFetch(&led_mailbox, &msg, MS2ST(temp == 6 ? 4000 : 6000));
|
||||
}
|
||||
// received a message (should be a wakeup), so restore previous state
|
||||
chThdSleepMilliseconds(3000); // need to wait until the page change finishes
|
||||
// note: any other messages are queued
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, save_breath1);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL2, save_breath2);
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_PICTDISP, save_page);
|
||||
break;
|
||||
case LED_MSG_SLEEP_LED_OFF:
|
||||
// should not get here; wakeup should be received in the branch above break;
|
||||
break;
|
||||
*/
|
||||
xprintf("--------------------\n");
|
||||
}
|
||||
xprintf("--------------------\n");
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
/* ==============================
|
||||
* led processing functions
|
||||
* ============================== */
|
||||
|
|
@ -451,14 +453,14 @@ void set_lock_leds(uint8_t lock_type, uint8_t led_on) {
|
|||
}
|
||||
}
|
||||
|
||||
void write_led_page (uint8_t page, const uint8_t *led_array, uint8_t led_count) {
|
||||
void write_led_page (uint8_t page, const uint8_t *user_led_array, uint8_t led_count) {
|
||||
uint8_t i;
|
||||
uint8_t row, col;
|
||||
uint8_t led_control_register[0x13] = {0};//led control register start address + 0x12 bytes
|
||||
|
||||
for(i=0;i<led_count;i++){
|
||||
row = ((led_array[i] / 10) % 10 - 1 ) * 2 + 1;//includes 1 byte shift for led register 0x00 address
|
||||
col = led_array[i] % 10 - 1;
|
||||
row = ((user_led_array[i] / 10) % 10 - 1 ) * 2 + 1;//includes 1 byte shift for led register 0x00 address
|
||||
col = user_led_array[i] % 10 - 1;
|
||||
|
||||
led_control_register[row] |= 1<<(col);
|
||||
}
|
||||
|
|
@ -491,22 +493,16 @@ void led_controller_init(void) {
|
|||
//set Display Option Register so all pwm intensity is controlled from Frame 1
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_DISPLAYOPT, IS31_REG_DISPLAYOPT_INTENSITY_SAME);
|
||||
|
||||
//TODO: test new init pwm loop
|
||||
/* set full pwm on Frame 1 */
|
||||
for(i=1; i<9; i++) {
|
||||
pwm_register_array[i]=0xFF;
|
||||
}
|
||||
pwm_register_array[0] = 0;
|
||||
__builtin_memset(pwm_register_array+1, 0xFF, 8);
|
||||
for(i=0; i<8; i++) {
|
||||
pwm_register_array[0] = 0x24 + (i * 0x10);//first byte of 9 bytes must be register address
|
||||
is31_write_data(0, pwm_register_array, 9);
|
||||
chThdSleepMilliseconds(5);
|
||||
}
|
||||
|
||||
//set all led bits on for Frame 2 LEDS_ALL
|
||||
//TODO: set all off in init
|
||||
full_page[0] = 0;
|
||||
__builtin_memset(full_page+1, 0, 0x12);
|
||||
is31_write_data(1, full_page, 1+0x12);
|
||||
|
||||
/* enable breathing when the displayed page changes */
|
||||
// Fade-in Fade-out, time = 26ms * 2^N, N=3
|
||||
is31_write_register(IS31_FUNCTIONREG, IS31_REG_BREATHCTRL1, (3<<4)|3);
|
||||
|
|
|
|||
|
|
@ -104,7 +104,7 @@ enum led_msg_t {
|
|||
TOGGLE_LED,
|
||||
TOGGLE_ALL,
|
||||
TOGGLE_BACKLIGHT,
|
||||
TOGGLE_LAYER_LEDS,
|
||||
TOGGLE_PAGE_LEDS,
|
||||
TOGGLE_NUM_LOCK,
|
||||
TOGGLE_CAPS_LOCK,
|
||||
MODE_BREATH,
|
||||
|
|
|
|||
Loading…
Reference in New Issue