[Keyboard] SplitKB's Zima (#11577)
Co-authored-by: Thomas Baart <thomas@splitkb.com> Co-authored-by: Joel Challis <git@zvecr.com>master
Drashna Jaelre
GitHub
parent
6ce6a94216
commit
c1361005fa
|
|
@ -0,0 +1,93 @@
|
|||
/*
|
||||
Copyright 2019 Thomas Baart
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0xF75B
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER splitkb
|
||||
#define PRODUCT Zima
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 3
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*/
|
||||
#define DIRECT_PINS { \
|
||||
{ C6, D6, D5 }, \
|
||||
{ C7, F7, D4 }, \
|
||||
{ E6, F5, F6 }, \
|
||||
{ F0, F1, F4 } \
|
||||
}
|
||||
|
||||
#define UNUSED_PINS
|
||||
|
||||
#define ENCODERS_PAD_A { B4 }
|
||||
#define ENCODERS_PAD_B { D7 }
|
||||
|
||||
// #define QMK_ESC_OUTPUT B7
|
||||
// #define QMK_ESC_INPUT C6
|
||||
// #define QMK_SPEAKER B6
|
||||
|
||||
#define B6_AUDIO
|
||||
#define AUDIO_CLICKY
|
||||
#define NO_MUSIC_MODE
|
||||
|
||||
#define RGB_DI_PIN B5
|
||||
#define RGBLED_NUM 5
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#define RGBLIGHT_LIMIT_VAL 255 /* The maximum brightness level */
|
||||
#define RGBLIGHT_SLEEP /* If defined, the RGB lighting will be switched off when the host goes to sleep */
|
||||
#define RGBLIGHT_EFFECT_BREATHING
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_MOOD
|
||||
#define RGBLIGHT_EFFECT_RAINBOW_SWIRL
|
||||
#define RGBLIGHT_EFFECT_STATIC_GRADIENT
|
||||
#define RGBLIGHT_EFFECT_TWINKLE
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCE 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
// #define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
// #define LOCKING_RESYNC_ENABLE
|
||||
|
||||
#define FB_ERM_LRA 0
|
||||
#define FB_BRAKEFACTOR 3 /* For 1x:0, 2x:1, 3x:2, 4x:3, 6x:4, 8x:5, 16x:6, Disable Braking:7 */
|
||||
#define FB_LOOPGAIN 1 /* For Low:0, Medium:1, High:2, Very High:3 */
|
||||
|
||||
/* Please refer to your datasheet for the optimal setting for your specific motor. */
|
||||
#define RATED_VOLTAGE 3
|
||||
#define V_PEAK 5
|
||||
|
||||
#define DRV_GREETING alert_750ms
|
||||
#define DRV_MODE_DEFAULT buzz
|
||||
// EC11K encoders have a different resolution than other EC11 encoders.
|
||||
// When using the default resolution of 4, if you notice your encoder skipping
|
||||
// every other tick, lower the resolution to 2.
|
||||
#define ENCODER_RESOLUTION 2
|
||||
|
|
@ -0,0 +1,25 @@
|
|||
{
|
||||
"keyboard_name": "Zima",
|
||||
"url": "splitkb.com",
|
||||
"maintainer": "splitkb.com, drashna",
|
||||
"width": 3,
|
||||
"height": 4,
|
||||
"layouts": {
|
||||
"LAYOUT_ortho_4x3": {
|
||||
"layout": [
|
||||
{"label":"K00 (B0,B4)", "x":0, "y":1},
|
||||
{"label":"K01 (B0,B5)", "x":1, "y":1},
|
||||
{"label":"K02 (B0,B6)", "x":2, "y":1},
|
||||
{"label":"K10 (B1,B4)", "x":0, "y":2},
|
||||
{"label":"K11 (B1,B5)", "x":1, "y":2},
|
||||
{"label":"K12 (B1,B6)", "x":2, "y":2},
|
||||
{"label":"K20 (B2,B4)", "x":0, "y":3},
|
||||
{"label":"K21 (B2,B5)", "x":1, "y":3},
|
||||
{"label":"K22 (B2,B6)", "x":2, "y":3},
|
||||
{"label":"K30 (B3,B4)", "x":0, "y":4},
|
||||
{"label":"K31 (B3,B5)", "x":1, "y":4},
|
||||
{"label":"K32 (B3,B6)", "x":2, "y":4}
|
||||
]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
/* Copyright 2019 Thomas Baart
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[0] = LAYOUT_ortho_4x3( /* Base */
|
||||
KC_MUTE, TG(1), TG(2),
|
||||
KC_P7, KC_P8, KC_P9,
|
||||
KC_P4, KC_P5, KC_P6,
|
||||
KC_P1, KC_P2, KC_P3
|
||||
),
|
||||
[1] = LAYOUT_ortho_4x3( /* Layer 1 */
|
||||
RESET, _______, XXXXXXX,
|
||||
AU_ON, AU_OFF, XXXXXXX,
|
||||
CK_TOGG, XXXXXXX, CK_UP,
|
||||
CK_RST, XXXXXXX, CK_DOWN
|
||||
),
|
||||
[2] = LAYOUT_ortho_4x3( /* Layer 2*/
|
||||
RGB_TOG, RGB_MOD, _______,
|
||||
RGB_HUI, RGB_SAI, RGB_VAI,
|
||||
RGB_HUD, RGB_SAD, RGB_VAD,
|
||||
HPT_TOG, HPT_FBK, HPT_CONT
|
||||
)
|
||||
};
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
# The default keymap for zima
|
||||
|
||||
This includes support for the OLED and Encoder. However, the actual code is found in the `zima.c` file. This can be replaced by adding your own `oled_task_user(void)` and `encoder_update_user` functinons. These will replace what is in the keyboard, and allow you to customize these features.
|
||||
|
||||
The reason that this is done this way, is so that this functionality will work on the [QMK Configurator](https://config.qmk.fm/#/splitkb/zima/LAYOUT_ortho_4x3)
|
||||
|
||||
For reference, the code used for the oled and encoder defaults is in [zima.c](https://github.com/qmk/qmk_firmware/tree/master/keyboards/splitkb/zima/zima.c).
|
||||
|
|
@ -0,0 +1,17 @@
|
|||
# Zima
|
||||
|
||||
|
||||
|
||||
A feature-packed twelve key macropad the size of a creditcard.
|
||||
|
||||
* Keyboard Maintainer: [Thomas Baart](https://github.com/splitkb)
|
||||
* Hardware Supported: Onboard ATmega32u4 with speaker, encoder, RGB underglow, OLED and haptic support, with a Type C connector
|
||||
* Hardware Availability: [splitkb.com](https://splitkb.com/collections/keyboard-kits/products/zima)
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make splitkb/zima:default
|
||||
|
||||
Keyboard can be put into bootloader mode by pressing the button to the right of the USB port on the underside of the PCB.
|
||||
|
||||
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
# MCU name
|
||||
MCU = atmega32u4
|
||||
|
||||
# Bootloader selection
|
||||
BOOTLOADER = atmel-dfu
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration
|
||||
MOUSEKEY_ENABLE = no # Mouse keys
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control
|
||||
CONSOLE_ENABLE = no # Console for debug
|
||||
COMMAND_ENABLE = no # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = no # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth
|
||||
AUDIO_ENABLE = yes # Audio output
|
||||
|
||||
ENCODER_ENABLE = yes # ENables the use of one or more encoders
|
||||
OLED_DRIVER_ENABLE = yes # Enables the use of OLED displays
|
||||
HAPTIC_ENABLE += DRV2605L # Supported but not included by defaut
|
||||
|
||||
LTO_ENABLE = yes
|
||||
|
|
@ -0,0 +1,112 @@
|
|||
/* Copyright 2019 Thomas Baart
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#include "zima.h"
|
||||
#include <stdio.h>
|
||||
|
||||
#ifdef HAPTIC_ENABLE
|
||||
# include "haptic.h"
|
||||
extern haptic_config_t haptic_config;
|
||||
#endif
|
||||
|
||||
#ifdef OLED_DRIVER_ENABLE
|
||||
static bool is_asleep = false;
|
||||
static uint32_t oled_timer;
|
||||
|
||||
void suspend_power_down_kb(void) {
|
||||
is_asleep = true;
|
||||
suspend_power_down_user();
|
||||
}
|
||||
|
||||
void suspend_wakeup_init_kb(void) {
|
||||
is_asleep = false;
|
||||
suspend_wakeup_init_user();
|
||||
}
|
||||
|
||||
__attribute__((weak)) oled_rotation_t oled_init_user(oled_rotation_t rotation) { return OLED_ROTATION_180; }
|
||||
|
||||
__attribute__((weak)) void oled_task_user(void) {
|
||||
if (is_asleep) {
|
||||
oled_off();
|
||||
return;
|
||||
}
|
||||
|
||||
if (timer_elapsed32(oled_timer) < 30000) {
|
||||
oled_on();
|
||||
oled_scroll_off();
|
||||
oled_write_P(PSTR("SplitKB's Zima"), false);
|
||||
char layer[2] = {0};
|
||||
snprintf(layer, sizeof(layer), "%d", get_highest_layer(layer_state));
|
||||
oled_write_P(PSTR(" L:"), false);
|
||||
oled_write_ln(layer, false);
|
||||
oled_write_ln_P(PSTR("--------------"), false);
|
||||
if (rgblight_is_enabled()) {
|
||||
oled_write_P(PSTR("HSV: "), false);
|
||||
char rgbs[14];
|
||||
snprintf(rgbs, sizeof(rgbs), "%3d, %3d, %3d", rgblight_get_hue(), rgblight_get_sat(), rgblight_get_val());
|
||||
oled_write_ln(rgbs, false);
|
||||
} else {
|
||||
oled_write_ln_P(PSTR("RGB LIGHT DISABLED"), false);
|
||||
}
|
||||
# ifdef AUDIO_ENABLE
|
||||
oled_write_P(PSTR("Audio:"), false);
|
||||
is_audio_on() ? oled_write_P(PSTR(" on"), false) : oled_write_P(PSTR("off"), false);
|
||||
# ifdef AUDIO_CLICKY
|
||||
oled_write_P(PSTR(" Clicky:"), false);
|
||||
(is_clicky_on() && is_audio_on()) ? oled_write_P(PSTR(" on"), false) : oled_write_P(PSTR("off"), false);
|
||||
# endif
|
||||
# endif
|
||||
} else {
|
||||
if (timer_elapsed32(oled_timer) < 120000) {
|
||||
oled_on();
|
||||
// clang-format off
|
||||
static const char PROGMEM qmk_logo[] = {
|
||||
0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87,0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f,0x90,0x91,0x92,0x93,0x94,
|
||||
0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7,0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf,0xb0,0xb1,0xb2,0xb3,0xb4,
|
||||
0xc0,0xc1,0xc2,0xc3,0xc4,0xc5,0xc6,0xc7,0xc8,0xc9,0xca,0xcb,0xcc,0xcd,0xce,0xcf,0xd0,0xd1,0xd2,0xd3,0xd4,0};
|
||||
// clang-format on
|
||||
oled_write_ln_P(qmk_logo, false);
|
||||
oled_scroll_right();
|
||||
} else {
|
||||
oled_off();
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
|
||||
oled_timer = timer_read32();
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef ENCODER_ENABLE
|
||||
__attribute__((weak)) void encoder_update_user(uint8_t index, bool clockwise) {
|
||||
if (clockwise) {
|
||||
tap_code16(KC_VOLU);
|
||||
} else {
|
||||
tap_code16(KC_VOLD);
|
||||
}
|
||||
# ifdef OLED_DRIVER_ENABLE
|
||||
oled_timer = timer_read32();
|
||||
# endif
|
||||
# if defined(AUDIO_ENABLE) && defined(AUDIO_CLICKY)
|
||||
if (is_audio_on() && is_clicky_on()) clicky_play();
|
||||
# endif
|
||||
# ifdef HAPTIC_ENABLE
|
||||
if (haptic_config.enable) haptic_play();
|
||||
# endif
|
||||
}
|
||||
#endif
|
||||
|
|
@ -0,0 +1,29 @@
|
|||
/* Copyright 2019 Thomas Baart
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 2 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
#define LAYOUT_ortho_4x3( \
|
||||
k00, k01, k02, \
|
||||
k03, k04, k05, \
|
||||
k06, k07, k08, \
|
||||
k09, k10, k11 \
|
||||
) { \
|
||||
{k00, k01, k02}, \
|
||||
{k03, k04, k05}, \
|
||||
{k06, k07, k08}, \
|
||||
{k09, k10, k11} }
|
||||
Loading…
Reference in New Issue