68 lines
3.2 KiB
Markdown
68 lines
3.2 KiB
Markdown
# Plaid-Pad
|
|
<img src="https://i.imgur.com/Jovhxpr.jpg" width="400">
|
|
<img src="https://i.imgur.com/V82cMqq.png" width="400">
|
|
|
|
A 4x4 numpad/macro pad with only through hole components. It supports up to 4 rotary encoder. The positions for the encoder are interchangeable with keyboard switches.
|
|
|
|
Below you can see the possible positions for the 4 rotary encoder (Rev1 only 2).
|
|
*If you place a encoder in the top left corner (E1), you can't use another encoder in the lower right corner.*
|
|
```
|
|
Rev1.1 Rev1
|
|
,-----------------------, ,-----------------------,
|
|
| E1 | E2 | E3 | E4 | | E1 | | | E2 |
|
|
|-----+-----+-----+-----| |-----+-----+-----+-----|
|
|
| | | | E3 | | | | | |
|
|
|-----+-----+-----+-----| |-----+-----+-----+-----|
|
|
| | | | E2 | | | | | |
|
|
|-----+-----+-----+-----| |-----+-----+-----+-----|
|
|
| | | | E1 | | | | | |
|
|
`-----------------------' `-----------------------'
|
|
```
|
|
|
|
- Encoder E1 performs a tap on `KC_F17` and `KC_F18`.
|
|
- Encoder E2 performs a tap on `KC_F19` and `KC_F20`.
|
|
- Encoder E3 performs a tap on `KC_F21` and `KC_F22`.
|
|
- Encoder E4 performs a tap on `KC_F23` and `KC_F24`.
|
|
|
|
*The F17-F24 keys are intended to be customized via [Karabiner-Elements (OSX)](https://github.com/pqrs-org/Karabiner-Elements), or [AutoHotkey](https://github.com/Lexikos/AutoHotkey_L) (WIN)*
|
|
|
|
It's a great companion to the Plaid keyboard by [hsgw](https://github.com/hsgw/) and heavily inspired by it.
|
|
* Keyboard Maintainer: BenRoe [GitHub](https://github.com/BenRoe) / [Twitter](https://twitter.com/keycapsss)
|
|
* Hardware Supported: ATmega328P with VUSB ([see Bootloader section](#Bootloader))
|
|
* Hardware Availability: [Keycapsss.com](https://keycapsss.com)
|
|
|
|
## QMK Firmware
|
|
_Bootloader and Firmware ([default keymap](https://github.com/qmk/qmk_firmware/tree/master/keyboards/keycapsss/plaid_pad)) are already on the ATmega328P chip._
|
|
|
|
Make example for this keyboard (after [setting up your build environment](https://docs.qmk.fm/#/getting_started_build_tools)):
|
|
|
|
make keycapsss/plaid_pad:default
|
|
// or
|
|
qmk compile -kb keycapsss/plaid_pad -km default
|
|
|
|
Flashing example for this keyboard:
|
|
|
|
make keycapsss/plaid_pad:default:flash
|
|
// or
|
|
qmk flash -kb keycapsss/plaid_pad -km default
|
|
|
|
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
|
|
|
|
## Bootloader
|
|
- same `usbasploader` as used for Plaid ([Instructions](https://github.com/hsgw/plaid/blob/master/doc/en/bootloader.md), [Repository](https://github.com/hsgw/USBaspLoader/tree/plaid))
|
|
|
|
### Enter bootloader mode (to flash a new firmware)
|
|
- Plug in the USB cable
|
|
- Push and hold RESET switch
|
|
- Push and hold BOOT switch
|
|
- Release RESET switch
|
|
- Release BOOT switch
|
|
|
|
or an alternative method:
|
|
- Unplug the USB cable
|
|
- Hold down the BOOT switch
|
|
- Plug in the USB cable
|
|
- Release the BOOT switch
|
|
|
|
If you succeed to enter bootloader mode, you can see usbasp in device manager, or `*** USBAsp device connected` in [QMK Toolbox](https://github.com/qmk/qmk_toolbox).
|