qmk_firmware/keyboards/tkw/grandiceps/readme.md

34 lines
1.3 KiB
Markdown

# grandiceps
![grandiceps](https://i.imgur.com/FMtsboVl.jpg)
ARM split keyboard with RGB underglow and encoders.
* Keyboard Maintainer: [vattern](https://github.com/vattern)
* Hardware Supported: f411 blackpill
* Hardware Availability: [grandiceps](https://github.com/vattern/grandiceps)
There are two versions of the Grandiceps. Please use the appropriate firmware for your board.
* Revision 2 has I2C eeprom and support for a Pimoroni trackball.
Make example for this keyboard (after setting up your build environment):
make tkw/grandiceps:default
make tkw/grandiceps/rev2:default
Flashing example for this keyboard:
make tkw/grandiceps:default:flash
make tkw/grandiceps/rev2:default:flash
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset buttons**: Hold down the BOOT0 button and then briefly press the NRST button on the BlackPill PCB.
* **Keycode in layout**: Press the key mapped to `RESET` if it is available