qmk_firmware/keyboards/yushakobo/navpad/10_helix_r/readme.md

1.3 KiB

navpad 1.0 with Helix (Right hand side)

10_helix_r

Navpad connected with helix keyboard (Right Side)

Make example for this keyboard (after setting up your build environment):

make yushakobo/navpad/10_helix_r:default

Flashing examples for this keyboard...

Helix side:

make yushakobo/navpad/10_helix_r:default:avrdude-split-right

Navpad side:

make yushakobo/navpad/10_helix_r:default:avrdude-split-left

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 3 ways:

  • Bootmagic reset: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
  • Physical reset button: Briefly press the button on the back of the PCB - some may have pads you must short instead
  • Keycode in layout: Press the key mapped to RESET if it is available