tudattr
/
qmk_firmware
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
qmk_firmware/keyboards/handwired/elrgo_s/readme.md

1.1 KiB
Raw Blame History

Elrgo S Split Keyboard

This is a fork of the VOID Ergo S with QMK Configurator support.

Elrgo S uses 2x Arduino Pro Micro (ATmega32U4) with 3D printed case.

Building guide, models for 3D printing

  • Keyboard Maintainer: Eloren
  • Hardware Supported: Arduino Pro Micro
  • Hardware Availability: Open Source

Make example for this keyboard (after setting up your build environment):

make handwired/elrgo_s:default

Flashing example for this keyboard:

make handwired/elrgo_s:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Bootloader

Enter the bootloader in 2 ways:

  • Physical reset button: Briefly press the button through the hole on the left side of the case.
  • Keycode in layout: Press the key mapped to RESET if it is available