qmk_firmware/keyboards/macrocat/readme.md

28 lines
1.1 KiB
Markdown

# macrocat
![macrocat](https://i.imgur.com/ItLHGBfh.jpg)
A cat like macro keyboard/numpad.
* Keyboard Maintainer: [catmunch](https://github.com/catmunch), [starcatmeow](https://github.com/starcatmeow)
* Hardware Supported: Fully Supported
* Hardware Availability: [MacroCat Keyboard](https://github.com/catmunch/macrocat)
Make example for this keyboard (after setting up your build environment):
make macrocat:default
Flashing example for this keyboard:
make macrocat:default:flash
## Bootloader
Enter the bootloader in 3 ways:
* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
* **Brand new atmega32u4 chip**: Plug the cable in, it will automatically boot into bootloader
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).